Jump to content
  • 0

Armbian on IMX6 - Trizeps VII board


deadbrain

Question

Hi all,

sorry if my question is stupid but I would like to use ARMBian on this Keith & Koep board.

I know that there are different problems with serial configuration and that may prevent u-boot to start.

I would like to know if I can regenerate easily an ISO adaptating the hardware with custom device tree ....

Which repositories should I clone ?

Thanks for your support

Kind regards

Jerome

Link to comment
Share on other sites

3 answers to this question

Recommended Posts

  • 0
13 hours ago, deadbrain said:

Which repositories should I clone ?


Since we don't support this board, I can give you only some generic tips. Inspect those examples to see what you might need to do:

https://github.com/armbian/build/pull/921
https://github.com/armbian/build/pull/1158

https://github.com/armbian/build/pull/1151

 

For start you need to be able to build image for your hardware manually, then you start to brought it in the system. You can use u-boot in binary form or made it from sources in the build process. Then add your device tree with a patch. You can skip all kernels and port support only for a kernel 4.19.y

Link to comment
Share on other sites

  • 0

Thanks guys for being so supportive. Your links are very helpful.We 'll try to finish our current work with a device tree integrating an external RTC ...

We use a bunch of scripts & work made by the board provider but they use a very old kernel (4.1) and this kernel does not evolve anymore. That's why we'd like to port your excellent work to have a fresh kernel and something very close from

Debian....

Merry christmas to all hardware hackers...

Best regards

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines