Jump to content

Unable to install exfat-fuse exfat-utils on Armbian


y52

Recommended Posts

I am using the latest Armbian image on OPI+.

 

I had a requirement to read a 64Gb USB flash formatted under Windows with the extFat filesystem.

Much to my surprise it didn't mount. I thought it was a hardware problem 1st. But then it appeared, that mount doesn't support the the extFat filesystem by default.

 

It is necessary to add the extra packages, but I didn't succeed:

 

root@orangepiplus:/# apt-get install exfat-fuse exfat-utils

Reading package lists... Done

Building dependency tree

Reading state information... Done

The following NEW packages will be installed:

exfat-fuse exfat-utils

0 upgraded, 2 newly installed, 0 to remove and 9 not upgraded.

Need to get 66.9 kB of archives.

After this operation, 198 kB of additional disk space will be used.

Err http://httpredir.debian.org/debian/ jessie/main exfat-fuse armhf 1.1.0-2+deb8u1

Could not resolve 'httpredir.debian.org'

Err http://httpredir.debian.org/debian/ jessie/main exfat-utils armhf 1.1.0-2+deb8u1

Could not resolve 'httpredir.debian.org'

E: Failed to fetch http://httpredir.debian.org/debian/pool/main/f/fuse-exfat/exfat-fuse_1.1.0-2+deb8u1_armhf.deb Could not resolve 'httpredir.debian.org'

 

E: Failed to fetch http://httpredir.debian.org/debian/pool/main/e/exfat-utils/exfat-utils_1.1.0-2+deb8u1_armhf.deb Could not resolve 'httpredir.debian.org'

 

E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

root@orangepiplus:/#

 

 

I switched to the OpenElec, which mounted the extFat nicely alone with the Fat32:

 

/dev/sdb1 29.5G 29.5G 0 100% /var/media/TF29GB

/dev/sdc1 58.0G 47.8G 10.3G 82% /var/media/USB58GB

 

 

OpenELEC:~ # cat /etc/mtab

 

/dev/sdb1 /var/media/TF29GB vfat rw,nosuid,nodev,noexec,noatime,fmask=0133,dmask=0022,codepage=cp437,iocharset=ascii,shortname=mixed,utf8,errors=continue 0 0

/dev/sdc1 /var/media/USB58GB fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0

 

What is the problem installing exfat-fuse exfat-utils ?

Link to comment
Share on other sites

The resolve issue was the 1st I thought about.

root@orangepiplus:/usr/src# ping httpredir.debian.org
PING httpredir.debian.org (176.9.184.93) 56(84) bytes of data.
64 bytes from raphael.ganneff.de (176.9.184.93): icmp_seq=1 ttl=46 time=83.6 ms
64 bytes from raphael.ganneff.de (176.9.184.93): icmp_seq=2 ttl=46 time=57.5 ms

 

 

Nonetheless, it appears to be the reason. I've retried the

 

root@orangepiplus:/# apt-get install exfat-fuse exfat-utils

 

and it succeeded this time.

Now I am able to mount:

root@orangepiplus:/usr/src# mount /dev/sdb1 /mnt/sdb1/
FUSE exfat 1.1.0

 

/dev/sdb1 /mnt/sdb1 fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0

 

/dev/sdb1        59G   33G   26G  57% /mnt/sdb1

 

Thanks for the prompt again.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines