39 39
constantius

Orangepi 3 h6 allwiner chip

Recommended Posts

2 hours ago, Werner said:

You can build your own image using the the build script available here: https://github.com/armbian/build

that is what I usually do and did earlier this morning,

Gave it just now another go but still NOK, Armbian_5.88_Orangepioneplus_Debian_stretch_dev_5.1.7.img,

thanks chaps for responding

Share this post


Link to post
Share on other sites

just built " Armbian_5.89_Orangepioneplus_Debian_stretch_dev_5.1.7.img " but still NOK on OpiOnePlus, cannot SSH to it,

similar is written here , but seems to be sorted on Opi3 - unfortunately cannot use debug tools nor hdmi at this stage, hoping for permanent fix soon  ...

Share this post


Link to post
Share on other sites

not sure what happened but we have code "green" again on OPiOnePlus thus we are good to go @1,8Ghz, thanks!

:~# cpufreq-info |grep available
  available frequency steps: 480 MHz, 720 MHz, 816 MHz, 888 MHz, 1.08 GHz, 1.32 GHz, 1.49 GHz, 1.64 GHz, 1.80 GHz

 

Share this post


Link to post
Share on other sites

[    4.631820] Unable to handle kernel paging request at virtual address ffff0000126fd9a8
[    4.639748] Mem abort info:
[    4.642548]   ESR = 0x86000006
[    4.645598]   Exception class = IABT (current EL), IL = 32 bits
[    4.651507]   SET = 0, FnV = 0
[    4.654556]   EA = 0, S1PTW = 0
[    4.657694] swapper pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____)
[    4.664557] [ffff0000126fd9a8] pgd=00000000b7fff003, pud=00000000b7ffe003, pmd=0000000000000000
[    4.673245] Internal error: Oops: 86000006 [#1] SMP
[    4.678115] Modules linked in: snd_pcm_dmaengine snd_pcm uas snd_timer snd soundcore btsdio(+) bluetooth brcmfmac ch341 brcmutil usbserial cfg80211 dw_hdmi_cec dw_hdmi_i2s_audio rfkill sun50i_h6_ths thermal_sys cpufreq_dt realtek dwmac_sun8i mdio_mux
[    4.700264] Process systemd-udevd (pid: 469, stack limit = 0x(____ptrval____))
[    4.707477] CPU: 0 PID: 469 Comm: systemd-udevd Not tainted 5.1.7-sunxi64 #5.89.190612
[    4.715381] Hardware name: OrangePi 3 (DT)
[    4.719470] pstate: 20000085 (nzCv daIf -PAN -UAO)
[    4.724257] pc : 0xffff0000126fd9a8
[    4.727747] lr : __update_load_avg_se+0x14/0x1e8
[    4.732355] sp : ffff000010003bc0
[    4.735663] x29: ffff000010003bc0 x28: ffff800074450000
[    4.740967] x27: 0000000000000000 x26: 0000000000000003
[    4.746271] x25: 0000000000000003 x24: 000000011413cb58
[    4.751575] x23: 0000000000000009 x22: ffff800073b5d200
[    4.756878] x21: 0000000000000000 x20: ffff800009a81ac0
[    4.762182] x19: ffff800077bc9e00 x18: 0000000000000000
[    4.767485] x17: 0000000000000000 x16: 0000000000000000
[    4.772787] x15: 0000000000000000 x14: 0000000000000000
[    4.778090] x13: 0000000000000000 x12: 0000000000000030
[    4.783393] x11: 0101010101010101 x10: 0000000000000040
[    4.788696] x9 : ffff000010dd69e0 x8 : ffff000010dd69d8
[    4.793999] x7 : ffff8000750002d8 x6 : 0000000009345c38
[    4.799302] x5 : 0000000000000004 x4 : 000000011413b800
[    4.804605] x3 : 0000000000001358 x2 : ffff800009a81ac0
[    4.809908] x1 : ffff800077bc9e00 x0 : 000000011413cb58
[    4.815212] Call trace:
[    4.817654]  0xffff0000126fd9a8
[    4.820791]  enqueue_task_fair+0xa8/0x6a8
[    4.824796]  activate_task+0x4c/0xa0
[    4.828365]  ttwu_do_activate.isra.10+0x4c/0x88
[    4.832889]  try_to_wake_up+0x208/0x408
[    4.836719]  default_wake_function+0x10/0x18
[    4.840981]  __wake_up_common+0x88/0x150
[    4.844899]  __wake_up_locked+0x18/0x20
[    4.848728]  complete+0x78/0xb0
[    4.851866]  mmc_wait_done+0x10/0x18
[    4.855436]  mmc_request_done+0xb4/0x160
[    4.859353]  sunxi_mmc_irq+0x374/0x3c0
[    4.863100]  __handle_irq_event_percpu+0x6c/0x190
[    4.867797]  handle_irq_event_percpu+0x34/0x88
[    4.872234]  handle_irq_event+0x40/0x98
[    4.876064]  handle_fasteoi_irq+0xcc/0x1a8
[    4.880155]  generic_handle_irq+0x24/0x38
[    4.884158]  __handle_domain_irq+0x5c/0xb0
[    4.888249]  gic_handle_irq+0x58/0xa8
[    4.891905]  el1_irq+0xb8/0x140
[    4.895043]  kernfs_find_ns+0x60/0x120
[    4.898786]  kernfs_iop_lookup+0x4c/0xb8
[    4.902703]  __lookup_slow+0x9c/0x1a8
[    4.906359]  lookup_slow+0x3c/0x60
[    4.909754]  walk_component+0x218/0x330
[    4.913585]  path_lookupat+0x94/0x1f8
[    4.917241]  filename_lookup+0x8c/0x160
[    4.921071]  user_path_at_empty+0x48/0x58
[    4.925075]  do_readlinkat+0x74/0x170
[    4.928731]  __arm64_sys_readlinkat+0x1c/0x28
[    4.933084]  el0_svc_common.constprop.0+0x64/0x160
[    4.937867]  el0_svc_handler+0x20/0x78
[    4.941610]  el0_svc+0x8/0xc
[    4.944489] Code: bad PC value
[    4.947539] ---[ end trace fb3818787af04e1c ]---
[    4.952149] Kernel panic - not syncing: Fatal exception in interrupt
[    4.958488] SMP: stopping secondary CPUs
[    6.004071] SMP: failed to stop secondary CPUs 0-1,3
[    6.009028] Kernel Offset: disabled
[    6.012511] CPU features: 0x002,20002004
[    6.016426] Memory Limit: none
[    6.019478] Rebooting in 10 seconds..
[   16.263075] SMP: stopping secondary CPUs
[   17.308656] SMP: failed to stop secondary CPUs 0-1,3

 

 

 

 

 

so with the old dtb for opi3 from 5.1.5 image mention earlier in the posts this is running fine from emmc

 

 

 

 

Share this post


Link to post
Share on other sites

none, as mentioned " ./compile.sh " is being used to compile dev images, this was in reply to Werner ( yesterday ): 

" You can build your own image using the the build script available here: https://github.com/armbian/build "

 

  ___  ____  _    ___
 / _ \|  _ \(_)  / _ \ _ __   ___   _
| | | | |_) | | | | | | '_ \ / _ \_| |_
| |_| |  __/| | | |_| | | | |  __/_   _|
 \___/|_|   |_|  \___/|_| |_|\___| |_|

Welcome to Debian Stretch with Armbian Linux 5.1.7-sunxi64
System load:   0.00 0.00 0.00   Up time:       7:49 hours
Memory usage:  12 % of 991MB    IP:            192.168.10.2
CPU temp:      48°C
Usage of /:    35% of 3.5G      storage/:      1% of 7.4G

Last login: Wed Jun 12 07:25:49 2019 from 192.168.10.60

 

Share this post


Link to post
Share on other sites

  ___  ____  _   _____
 / _ \|  _ \(_) |___ /
| | | | |_) | |   |_ \
| |_| |  __/| |  ___) |
 \___/|_|   |_| |____/

Welcome to Ubuntu Bionic with Armbian Linux 5.1.7-sunxi64
System load:   0.04 0.05 0.04   Up time:       9:20 hours
Memory usage:  26 % of 1997MB   Zram usage:    7 % of 998Mb     IP:            4.3.2.1
CPU temp:      54°C
Usage of /:    82% of 7.1G      storage/:      55% of 1.9T

[ General system configuration (beta): armbian-config ]

Last login: Wed Jun 12 09:46:29 2019 from 1.2.3.4


root@orangepi3:/home/pi3# uname -a
Linux orangepi3 5.1.7-sunxi64 #5.89.190612 SMP Tue Jun 11 23:22:44 CEST 2019 aarch64 aarch64 aarch64 GNU/Linux

 

with dtb from Armbian_5.88.190601_Orangepi3_Ubuntu_bionic_dev_5.1.5.7z up and runing on EMMC. just boot the 5.1.5 image and copy over the old dtb ...

Share this post


Link to post
Share on other sites

krachlatte, good point.

New kernels (5.1.6, 5.1.7) are good, problem is with new (>5.1.5) DBT files.

So, I hold linux-dtb-dev-sunxi64 package on 5.1.5.

Share this post


Link to post
Share on other sites

Hi guys,

 

I'm aware of the current issues with the OPi3 images not booting and for me I can't find any of the currently downloadable images that will boot.

 

I just need to urgently test a couple of things - can anyone point me to a reasonably recent Ubuntu Bionic dev server image for the OPi3 that will boot/run?

 

I have an "old" Armbian_5.78_Orangepi3_Debian_stretch_dev_5.0.7.img that runs just fine (as long as I don't upgrade it!) but I don't have any similar Ubuntu versions. Does anyone happen to know of an archive of old versions, or maybe have something that I could download direct?

 

Many thanks!
George

 

Share this post


Link to post
Share on other sites
7 minutes ago, dziobak said:

George, 5.1.5 is working for me.  ..........

 

Thanks for the suggestion but I need to use Ubuntu for the things I want to test, and I don't have *ANY* earlier Ubuntu images, only Debian :-/

Share this post


Link to post
Share on other sites
15 hours ago, dziobak said:

apt-mark hold linux-dtb-dev-sunxi64

and do full apt update/upgrade

Works perfectly for me - thank you @dziobak :thumbup:

  ___  ____  _   _____
 / _ \|  _ \(_) |___ /
| | | | |_) | |   |_ \
| |_| |  __/| |  ___) |
 \___/|_|   |_| |____/
                       
Welcome to Ubuntu Bionic with Armbian Linux 5.1.7-sunxi64
System load:   0.22 0.16 0.14      Up time:       44 min        
Memory usage:  17 % of 1997MB     IP:            192.168.xxx.xxx
CPU temp:      36°C               
Usage of /:    24% of 7.1G       

       

 

Share this post


Link to post
Share on other sites

Please advice, how to restore old dtb files? After upgrade to 5.1.7 (debian), OPi3 system became unstable and hang in maximum 50 minutes (sometimes immediately after reboot)

 

Tried to rollback

 

dpkg: warning: downgrading linux-dtb-dev-sunxi64 from 5.89.190614 to 5.89.190612

 

but still same issue.

Share this post


Link to post
Share on other sites

After updating to new firmware the board not booting and wait on u-boot state

 

=> version
U-Boot 2019.04-armbian (May 08 2019 - 10:38:01 +0200) Allwinner Technology

aarch64-linux-gnu-gcc (Linaro GCC 7.4-2019.02) 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4]
GNU ld (Linaro_Binutils-2019.02) 2.28.2.20170706

 

Please advice, is it possible to upload new image somehow?

Share this post


Link to post
Share on other sites
39 39