Jump to content

no Wifi interface on Nanopi Duo 4.19.13


obazda

Recommended Posts

Hi Guys,

 

today I've Updated from

"Armbian_5.67_Nanopiduo_Debian_stretch_next_4.14.90"  to

 Armbian_5.69_Nanopiduo_Debian_stretch_next_4.19.13"

 

now I've the follwing problem on my nanopi duo. It has Wifi onboard (XR819), but after an Update to Kernel 4.19.13-sunxi. my wifi device was lost. Before the Update the wifi device was listet as wlan0.

to avoid configuration errors i also reinstalled the system. It does not work with debian or ubuntu. If i roleback to an older kernel everything works great. 


 

uname -a
Linux nanopiduo 4.19.13-sunxi #5.69 SMP Wed Jan 9 16:26:48 CET 2019 armv7l armv7l armv7l GNU/Linux


 ifconfig -a
dummy0: flags=130<BROADCAST,NOARP>  mtu 1500
        ether fa:76:fc:15:3e:84  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 02:42:0f:94:b1:fc  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 37

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


nmcli radio
WIFI-HW  WIFI     WWAN-HW  WWAN
enabled  enabled  enabled  enabled




Module                  Size  Used by
zstd                   16384  4
evdev                  20480  1
sun8i_codec_analog     24576  0
sun8i_adda_pr_regmap    16384  1 sun8i_codec_analog
snd_soc_simple_card    16384  0
snd_soc_simple_card_utils    16384  1 snd_soc_simple_card
sun4i_i2s              20480  0
snd_soc_core          106496  4 sun4i_i2s,sun8i_codec_analog,snd_soc_simple_card_utils,snd_soc_simple_card
snd_pcm_dmaengine      16384  1 snd_soc_core
snd_pcm                65536  3 sun4i_i2s,snd_pcm_dmaengine,snd_soc_core
sun4i_gpadc_iio        16384  0
snd_timer              24576  1 snd_pcm
industrialio           49152  1 sun4i_gpadc_iio
snd                    45056  3 snd_timer,snd_soc_core,snd_pcm
soundcore              16384  1 snd
sun8i_ths              16384  0
zram                   20480  5
cpufreq_dt             16384  0
uio_pdrv_genirq        16384  0
gpio_keys              20480  0
thermal_sys            57344  3 cpufreq_dt,sun8i_ths,sun4i_gpadc_iio
uio                    16384  1 uio_pdrv_genirq
sch_fq_codel           20480  2
usb_f_acm              16384  1
u_serial               20480  3 usb_f_acm
g_serial               16384  0
libcomposite           40960  2 g_serial,usb_f_acm
ip_tables              20480  0
x_tables               20480  1 ip_tables
pwrseq_simple          16384  1
lima                   40960  0
gpu_sched              20480  1 lima
ttm                    57344  1 lima




 dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.19.13-sunxi (root@nightly) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.69 SMP Wed Jan 9 16:26:48 CET 2019
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: FriendlyARM NanoPi DUO
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 128 MiB at 0x57c00000
[    0.000000] On node 0 totalpages: 131072
[    0.000000]   Normal zone: 1152 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] random: get_random_bytes called from start_kernel+0x8d/0x3c2 with crng_init=0
[    0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s41484 r8192 d24052 u73728
[    0.000000] pcpu-alloc: s41484 r8192 d24052 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129920
[    0.000000] Kernel command line: root=UUID=4184603d-f069-41c2-95e2-68f03fbdbdcc rootwait rootfstype=ext4 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=ab235005-01 ubootsource=mmc usb-storage.quirks=   sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 524288 bytes of page_ext
[    0.000000] Memory: 365120K/524288K available (8192K kernel code, 896K rwdata, 2420K rodata, 1024K init, 316K bss, 28096K reserved, 131072K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
                   lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf800000 - 0xbfe00000   (   6 MB)
                     .text : 0x(ptrval) - 0x(ptrval)   (9184 kB)
                     .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
                     .data : 0x(ptrval) - 0x(ptrval)   ( 897 kB)
                      .bss : 0x(ptrval) - 0x(ptrval)   ( 317 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 36585 entries in 72 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000011] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000026] Switching to timer-based delay loop, resolution 41ns
[    0.000347] Console: colour dummy device 80x30
[    0.000434] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000455] pid_max: default: 32768 minimum: 301
[    0.000919] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000935] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.002452] CPU: Testing write buffer coherency: ok
[    0.003214] CPU0: update cpu_capacity 1024
[    0.003227] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.004266] Setting up static identity map for 0x40100000 - 0x40100054
[    0.004548] rcu: Hierarchical SRCU implementation.
[    0.005946] smp: Bringing up secondary CPUs ...
[    0.017179] CPU1: update cpu_capacity 1024
[    0.017192] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.028574] CPU2: update cpu_capacity 1024
[    0.028585] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.039866] CPU3: update cpu_capacity 1024
[    0.039877] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.040049] smp: Brought up 1 node, 4 CPUs
[    0.040063] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.040071] CPU: All CPU(s) started in HYP mode.
[    0.040076] CPU: Virtualization extensions available.
[    0.042073] devtmpfs: initialized
[    0.054859] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.055247] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.055276] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.064378] xor: measuring software checksum speed
[    0.103945]    arm4regs  :   598.000 MB/sec
[    0.144054]    8regs     :   356.000 MB/sec
[    0.184188]    32regs    :   365.000 MB/sec
[    0.224308]    neon      :   605.000 MB/sec
[    0.224316] xor: using function: neon (605.000 MB/sec)
[    0.224430] pinctrl core: initialized pinctrl subsystem
[    0.226227] NET: Registered protocol family 16
[    0.230623] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.231531] audit: initializing netlink subsys (disabled)
[    0.231895] audit: type=2000 audit(0.204:1): state=initialized audit_enabled=0 res=1
[    0.232704] cpuidle: using governor ladder
[    0.232763] cpuidle: using governor menu
[    0.233766] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.233776] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.328896] raid6: int32x1  gen()    89 MB/s
[    0.397151] raid6: int32x1  xor()    76 MB/s
[    0.465276] raid6: int32x2  gen()   122 MB/s
[    0.533403] raid6: int32x2  xor()    94 MB/s
[    0.601559] raid6: int32x4  gen()   123 MB/s
[    0.670046] raid6: int32x4  xor()    92 MB/s
[    0.738275] raid6: int32x8  gen()   118 MB/s
[    0.806317] raid6: int32x8  xor()    82 MB/s
[    0.874403] raid6: neonx1   gen()   235 MB/s
[    0.942731] raid6: neonx1   xor()   219 MB/s
[    1.010959] raid6: neonx2   gen()   316 MB/s
[    1.079151] raid6: neonx2   xor()   283 MB/s
[    1.147283] raid6: neonx4   gen()   379 MB/s
[    1.215543] raid6: neonx4   xor()   318 MB/s
[    1.283811] raid6: neonx8   gen()   341 MB/s
[    1.351973] raid6: neonx8   xor()   288 MB/s
[    1.351981] raid6: using algorithm neonx4 gen() 379 MB/s
[    1.351987] raid6: .... xor() 318 MB/s, rmw enabled
[    1.351994] raid6: using neon recovery algorithm
[    1.354701] SCSI subsystem initialized
[    1.355059] libata version 3.00 loaded.
[    1.355427] usbcore: registered new interface driver usbfs
[    1.355505] usbcore: registered new interface driver hub
[    1.355622] usbcore: registered new device driver usb
[    1.355930] media: Linux media interface: v0.10
[    1.356000] videodev: Linux video capture interface: v2.00
[    1.356282] pps_core: LinuxPPS API ver. 1 registered
[    1.356291] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.356336] PTP clock support registered
[    1.358912] clocksource: Switched to clocksource arch_sys_counter
[    1.530605] VFS: Disk quotas dquot_6.6.0
[    1.530771] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.546050] NET: Registered protocol family 2
[    1.547394] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    1.547445] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    1.547542] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    1.547663] TCP: Hash tables configured (established 4096 bind 4096)
[    1.547852] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    1.547912] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    1.548244] NET: Registered protocol family 1
[    1.549147] RPC: Registered named UNIX socket transport module.
[    1.549155] RPC: Registered udp transport module.
[    1.549162] RPC: Registered tcp transport module.
[    1.549169] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.549600] Trying to unpack rootfs image as initramfs...
[    2.486968] Freeing initrd memory: 7936K
[    2.490248] Initialise system trusted keyrings
[    2.490659] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    2.502065] zbud: loaded
[    2.506251] NFS: Registering the id_resolver key type
[    2.506300] Key type id_resolver registered
[    2.506309] Key type id_legacy registered
[    2.506332] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.506340] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    2.508527] JFS: nTxBlock = 3938, nTxLock = 31508
[    2.529389] Key type asymmetric registered
[    2.529406] Asymmetric key parser 'x509' registered
[    2.529551] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    2.529821] io scheduler noop registered
[    2.529830] io scheduler deadline registered
[    2.530169] io scheduler cfq registered (default)
[    2.530179] io scheduler mq-deadline registered
[    2.530187] io scheduler kyber registered
[    2.530448] io scheduler bfq registered
[    2.532647] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[    2.540272] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    2.543274] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    2.640693] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    2.645020] console [ttyS0] disabled
[    2.665272] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 40, base_baud = 1500000) is a U6_16550A
[    2.665368] console [ttyS0] enabled
[    2.675671] brd: module loaded
[    2.686214] loop: module loaded
[    2.690382] libphy: Fixed MDIO Bus: probed
[    2.691425] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[    2.691495] dwmac-sun8i 1c30000.ethernet: No regulator found
[    2.692119] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[    2.692133] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[    2.692146] dwmac-sun8i 1c30000.ethernet: COE Type 2
[    2.692157] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[    2.692169] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[    2.692181] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[    2.692434] libphy: stmmac: probed
[    2.693278] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
[    2.693450] libphy: mdio_mux: probed
[    2.693486] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
[    2.693501] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
[    2.703199] libphy: mdio_mux: probed
[    2.704792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.704802] ehci-platform: EHCI generic platform driver
[    2.705129] ehci-platform 1c1a000.usb: EHCI Host Controller
[    2.705180] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[    2.706648] ehci-platform 1c1a000.usb: irq 27, io mem 0x01c1a000
[    2.718931] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[    2.719433] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    2.719449] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.719461] usb usb1: Product: EHCI Host Controller
[    2.719472] usb usb1: Manufacturer: Linux 4.19.13-sunxi ehci_hcd
[    2.719483] usb usb1: SerialNumber: 1c1a000.usb
[    2.720468] hub 1-0:1.0: USB hub found
[    2.720554] hub 1-0:1.0: 1 port detected
[    2.721962] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.722003] ohci-platform: OHCI generic platform driver
[    2.722294] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[    2.722349] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[    2.722767] ohci-platform 1c1a400.usb: irq 28, io mem 0x01c1a400
[    2.783385] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    2.783400] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.783412] usb usb2: Product: Generic Platform OHCI controller
[    2.783423] usb usb2: Manufacturer: Linux 4.19.13-sunxi ohci_hcd
[    2.783434] usb usb2: SerialNumber: 1c1a400.usb
[    2.784329] hub 2-0:1.0: USB hub found
[    2.784416] hub 2-0:1.0: 1 port detected
[    2.786447] usbcore: registered new interface driver usb-storage
[    2.787803] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
[    2.787816] sun6i-rtc 1f00000.rtc: RTC enabled
[    2.788172] i2c /dev entries driver
[    2.790642] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    2.792091] sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2
[    2.793084] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    2.793531] ledtrig-cpu: registered to indicate activity on CPUs
[    2.793659] hidraw: raw HID events driver (C) Jiri Kosina
[    2.793865] usbcore: registered new interface driver usbhid
[    2.793871] usbhid: USB HID core driver
[    2.801500] Initializing XFRM netlink socket
[    2.802745] NET: Registered protocol family 10
[    2.818694] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    2.819496] sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.2
[    2.819627] sunxi-mmc 1c10000.mmc: Dropping the link to regulator.2
[    2.837401] Segment Routing with IPv6
[    2.837586] NET: Registered protocol family 17
[    2.837629] NET: Registered protocol family 15
[    2.837729] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.837814] 8021q: 802.1Q VLAN Support v1.8
[    2.837905] Key type dns_resolver registered
[    2.838710] Registering SWP/SWPB emulation handler
[    2.839859] registered taskstats version 1
[    2.839868] Loading compiled-in X.509 certificates
[    2.840009] zswap: loaded using pool lzo/zbud
[    2.843651] Btrfs loaded, crc32c=crc32c-generic
[    2.855309] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.858476] mmc0: new high speed SDHC card at address aaaa
[    2.859539] Key type encrypted registered
[    2.860784] mmcblk0: mmc0:aaaa SB32G 29.7 GiB
[    2.864517]  mmcblk0: p1
[    2.878655] ehci-platform 1c1c000.usb: EHCI Host Controller
[    2.878710] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 3
[    2.879720] ehci-platform 1c1c000.usb: irq 29, io mem 0x01c1c000
[    2.894919] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    2.895298] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    2.895313] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.895324] usb usb3: Product: EHCI Host Controller
[    2.895335] usb usb3: Manufacturer: Linux 4.19.13-sunxi ehci_hcd
[    2.895346] usb usb3: SerialNumber: 1c1c000.usb
[    2.896329] hub 3-0:1.0: USB hub found
[    2.896406] hub 3-0:1.0: 1 port detected
[    2.897870] ehci-platform 1c1d000.usb: EHCI Host Controller
[    2.897917] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 4
[    2.898375] ehci-platform 1c1d000.usb: irq 31, io mem 0x01c1d000
[    2.910946] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
[    2.911294] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    2.911309] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.911320] usb usb4: Product: EHCI Host Controller
[    2.911332] usb usb4: Manufacturer: Linux 4.19.13-sunxi ehci_hcd
[    2.911343] usb usb4: SerialNumber: 1c1d000.usb
[    2.912218] hub 4-0:1.0: USB hub found
[    2.912285] hub 4-0:1.0: 1 port detected
[    2.913620] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    2.913676] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 5
[    2.914052] ohci-platform 1c1c400.usb: irq 30, io mem 0x01c1c400
[    2.975278] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    2.975293] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.975305] usb usb5: Product: Generic Platform OHCI controller
[    2.975316] usb usb5: Manufacturer: Linux 4.19.13-sunxi ohci_hcd
[    2.975327] usb usb5: SerialNumber: 1c1c400.usb
[    2.976157] hub 5-0:1.0: USB hub found
[    2.976224] hub 5-0:1.0: 1 port detected
[    2.977540] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
[    2.977582] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 6
[    2.977963] ohci-platform 1c1d400.usb: irq 32, io mem 0x01c1d400
[    3.039259] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
[    3.039274] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.039286] usb usb6: Product: Generic Platform OHCI controller
[    3.039297] usb usb6: Manufacturer: Linux 4.19.13-sunxi ohci_hcd
[    3.039308] usb usb6: SerialNumber: 1c1d400.usb
[    3.040168] hub 6-0:1.0: USB hub found
[    3.040259] hub 6-0:1.0: 1 port detected
[    3.041681] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[    3.041816] usb_phy_generic usb_phy_generic.0.auto: Linked as a consumer to regulator.0
[    3.044310] of_cfs_init
[    3.044466] of_cfs_init: OK
[    3.044576] sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.2
[    3.044677] sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.4
[    3.044734] vcc3v0: disabling
[    3.044745] vcc5v0: disabling
[    3.044752] vcc-wifi: disabling
[    3.046216] sunxi-mmc 1c10000.mmc: Dropping the link to regulator.4
[    3.046327] sunxi-mmc 1c10000.mmc: Dropping the link to regulator.2
[    3.055199] Freeing unused kernel memory: 1024K
[    3.067304] Run /init as init process
[    4.284456] lima 1c40000.gpu: bus rate = 200000000
[    4.284475] lima 1c40000.gpu: mod rate = 384000000
[    4.284965] [TTM] Zone  kernel: Available graphics memory: 252576 kiB
[    4.284973] [TTM] Initializing pool allocator
[    4.286577] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
[    4.286705] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
[    4.286809] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
[    4.287015] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
[    4.289174] [drm] Initialized lima 1.0.0 20170325 for 1c40000.gpu on minor 0
[    4.292444] sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.2
[    4.292654] sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.4
[    4.295874] sunxi-mmc 1c10000.mmc: Dropping the link to regulator.4
[    4.296016] sunxi-mmc 1c10000.mmc: Dropping the link to regulator.2
[    4.300760] sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.2
[    4.300881] sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.4
[    4.306747] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[    4.471019] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
[    4.484820] sunxi-mmc 1c10000.mmc: no support for card's volts
[    4.484839] mmc1: error -22 whilst initialising SDIO card
[    4.486595] sunxi-mmc 1c10000.mmc: no support for card's volts
[    4.486608] mmc1: error -22 whilst initialising MMC card
[    5.242439] random: fast init done
[    5.273173] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[    5.945405] systemd[1]: System time before build time, advancing clock.
[    5.997248] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.998075] systemd[1]: Detected architecture arm.
[    6.038122] systemd[1]: Set hostname to <nanopiduo>.
[    6.734729] random: systemd: uninitialized urandom read (16 bytes read)
[    6.735374] systemd[1]: Started ntp-systemd-netif.path.
[    6.747246] random: systemd: uninitialized urandom read (16 bytes read)
[    6.747686] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.767131] random: systemd: uninitialized urandom read (16 bytes read)
[    6.768868] systemd[1]: Created slice User and Session Slice.
[    6.784709] systemd[1]: Created slice System Slice.
[    6.800025] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.811597] systemd[1]: Listening on Syslog Socket.
[    6.823672] systemd[1]: Listening on udev Control Socket.
[    7.020660] g_serial gadget: Gadget Serial v2.4
[    7.020679] g_serial gadget: g_serial ready
[    7.030098] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
[    7.717854] systemd-journald[247]: Received request to flush runtime journal from PID 1
[    8.532121] zram: Added device: zram0
[    8.536882] zram: Added device: zram1
[    8.541498] zram: Added device: zram2
[    8.542765] zram: Added device: zram3
[    8.547628] zram: Added device: zram4
[    8.551948] zram: Added device: zram5
[    8.591819] cpu cpu0: Linked as a consumer to regulator.5
[    8.591980] cpu cpu0: Dropping the link to regulator.5
[    8.592404] cpu cpu0: Linked as a consumer to regulator.5
[    8.594027] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator
[    8.594053] cpu cpu0: _opp_add: OPP not supported by regulators (1056000000)
[    8.594221] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator
[    8.594235] cpu cpu0: _opp_add: OPP not supported by regulators (1104000000)
[    8.594440] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator
[    8.594455] cpu cpu0: _opp_add: OPP not supported by regulators (1152000000)
[    8.594638] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator
[    8.594653] cpu cpu0: _opp_add: OPP not supported by regulators (1200000000)
[    8.594801] core: _opp_supported_by_regulators: OPP minuV: 1340000 maxuV: 1340000, not supported by regulator
[    8.594816] cpu cpu0: _opp_add: OPP not supported by regulators (1224000000)
[    8.595133] core: _opp_supported_by_regulators: OPP minuV: 1340000 maxuV: 1340000, not supported by regulator
[    8.595152] cpu cpu0: _opp_add: OPP not supported by regulators (1248000000)
[    8.595310] core: _opp_supported_by_regulators: OPP minuV: 1340000 maxuV: 1340000, not supported by regulator
[    8.595323] cpu cpu0: _opp_add: OPP not supported by regulators (1296000000)
[    8.595519] core: _opp_supported_by_regulators: OPP minuV: 1400000 maxuV: 1400000, not supported by regulator
[    8.595533] cpu cpu0: _opp_add: OPP not supported by regulators (1344000000)
[    8.595715] core: _opp_supported_by_regulators: OPP minuV: 1400000 maxuV: 1400000, not supported by regulator
[    8.595728] cpu cpu0: _opp_add: OPP not supported by regulators (1368000000)
[    8.660881] input: r_gpio_keys as /devices/platform/r_gpio_keys/input/input0
[    8.686443] zram1: detected capacity change from 0 to 64659456
[    8.893417] sun8i_ths 1c25000.thermal-sensor: no memory resources defined
[    8.893462] sun8i_ths: probe of 1c25000.thermal-sensor failed with error -22
[    8.944511] thermal thermal_zone0: failed to read out thermal zone (-110)
[    9.795151] Adding 63140k swap on /dev/zram1.  Priority:5 extents:1 across:63140k SSFS
[    9.809915] zram2: detected capacity change from 0 to 64659456
[   10.853228] Adding 63140k swap on /dev/zram2.  Priority:5 extents:1 across:63140k SSFS
[   10.856888] zram3: detected capacity change from 0 to 64659456
[   11.153417] random: crng init done
[   11.153437] random: 7 urandom warning(s) missed due to ratelimiting
[   11.262534] Adding 63140k swap on /dev/zram3.  Priority:5 extents:1 across:63140k SSFS
[   11.266098] zram4: detected capacity change from 0 to 64659456
[   11.296137] Adding 63140k swap on /dev/zram4.  Priority:5 extents:1 across:63140k SSFS
[   11.421362] zram0: detected capacity change from 0 to 52428800
[   11.795961] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard
[   14.546107] EXT4-fs (mmcblk0p1): resizing filesystem from 226304 to 7712800 blocks
[   26.674028] EXT4-fs (mmcblk0p1): resized to 3145728 blocks
[   37.360914] EXT4-fs (mmcblk0p1): resized to 5767168 blocks
[   45.342118] EXT4-fs (mmcblk0p1): resized filesystem to 7712800
[   49.293013] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   49.297171] Generic PHY 0.1:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0.1:01, irq=POLL)
[   49.303114] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
[   49.303138] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
[   49.303151] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
[   49.304029] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready



 

Edited by obazda
Link to comment
Share on other sites

4 hours ago, obazda said:

[    4.306747] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq

[    4.471019] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB

[    4.484820] sunxi-mmc 1c10000.mmc: no support for card's volts

[    4.484839] mmc1: error -22 whilst initialising SDIO card

[    4.486595] sunxi-mmc 1c10000.mmc: no support for card's volts

[    4.486608] mmc1: error -22 whilst initialising MMC card

It seems to be a "mmc-pwrseq" issue, maybe using wrong gpio in DT for the power enabling ...

Link to comment
Share on other sites

I think this is not a problem, but i downgrade my kernel with the same power supply, and wifi works again. After that i upgrade the kernel to 4.19 and 4.20 and wifi didnt work. Only with 4.19. and 4.20 exit a dummy0 interface. 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines