Jump to content

[Odroid HC1] [OMV] Slow smb/nfs on 4.14.x


Marcin Jabrzyk

Recommended Posts

Armbianmonitor:

Hi,

 

I'm using Odroid HC1 for quite a long time and I've observed much degradation on SMB/NFS speed when making upgrades to the board. I'm not sure why? Maybe I'll find some idea what it can be.

Previously the board was working with speeds >100MB/s when reading from it on Windows (smb) or Linux (nfs) now max speeds on the same configuration are ~40 MB/s. That's way too slow. I don't see any process to hang on pc, while copying using smb the samba process is using not so big amount of CPU on big cores from what I see.

I've grabbed armbianmonitor output so you can check it also: http://ix.io/1zrL Currently I'm working on:  4.14.87-odroidxu4

 

Thanks,

Marcin

Edited by Marcin Jabrzyk
Link to comment
Share on other sites

Here is what turns out. My USB3.0 to Gigabit Ethernet adapter was very very bad quality. After looking at iperf3 it maxed out <400 Mb/s. After switching to other one Odroid gives ~100MB/s

 

 

Sorry for late answer. Here I my results that I currently get. On a fresh image of OMV4 from Sourceforge with only apt update, apt dist-upgrade and single samba share configured. The speed I have are super bad. I'm out of ideas.

 

lan_write.jpg.592e4a8fb750f1e31a20cc984d0ffd75.jpglan_read.jpg.0aa0d95c6141b7301e0d6ed158d20af8.jpghelios.jpg.778f43f7e50494f32334e3186dab6617.jpg

 

I've also done some dd test of write to the hard disk from console

 

Quote

root@odroidxu4:/srv/dev-disk-by-label-SEAGATE# dd if=/dev/zero of=test oflag=direct bs=4M count=256
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 14.7776 s, 72.7 MB/s
root@odroidxu4:/srv/dev-disk-by-label-SEAGATE# dd if=/dev/zero of=test oflag=direct bs=4M count=256
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 17.4451 s, 61.5 MB/s
root@odroidxu4:/srv/dev-disk-by-label-SEAGATE# dd if=/dev/zero of=test oflag=direct bs=4M count=256
256+0 records in
256+0 records out
1073741824 bytes (1.1 GB, 1.0 GiB) copied, 13.8385 s, 77.6 MB/s

 

The results I get are nowhere as good as I can see here

and here https://wiki.odroid.com/odroid-xu4/software/omv_nas/eng/01_beginning?s[]=seagate#reference_samba_speed_measurement

 

I'm using Seagate ST5000LM000-2AN170

Edited by Marcin Jabrzyk
Update
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines