I am running Debian Strech on a headless server with armbian (since 2014 on wheezy), on a Cubox-i 4 Pro.
My system is on /dev/sda1
After an upgrade, few minutes ago, my device is no more reachable by ssh neither answering to ping.
It seems to boot the kernel but I am not even sure of that (as nothing appears in the console after "booting the kernel").
Here is the full console log:
U-Boot SPL 2013.10-rc4-ge4bc4c3 (Dec 18 2014 - 14:55:42)
Boot Device: SD1
spl: error reading image u-boot.img, err - -1
Load image from RAW...
U-Boot 2013.10-rc4-ge4bc4c3 (Dec 18 2014 - 14:55:42)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: MX6-CuBox-i
DRAM: 2 GiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: vga
Err: vga
Net: FEC [PRIME]
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
Hit any key to stop autoboot: 0
mmc0 is current device
** File not found /boot.scr **
** File not found /uEnv.txt **
** File not found /zImage **
** File not found /uImage **
1816 bytes read in 127 ms (13.7 KiB/s)
Running bootscript from mmc ...
## Executing script at 10800000
** File not found .next **
48 bytes read in 114 ms (0 Bytes/s)
36853 bytes read in 826 ms (43 KiB/s)
4636514 bytes read in 411 ms (10.8 MiB/s)
5839840 bytes read in 482 ms (11.6 MiB/s)
Kernel image @ 0x10800000 [ 0x000000 - 0x591be0 ]
## Loading init Ramdisk from Legacy Image at 14800000 ...
Image Name: uInitrd
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 4636450 Bytes = 4.4 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 18000000
Booting using the fdt blob at 0x18000000
Using Device Tree in place at 18000000, end 1800bff4
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Files located in /boot on the SDCard (same files list in sda/boot):
Question
Aoz
Hi,
I am running Debian Strech on a headless server with armbian (since 2014 on wheezy), on a Cubox-i 4 Pro.
My system is on /dev/sda1
After an upgrade, few minutes ago, my device is no more reachable by ssh neither answering to ping.
It seems to boot the kernel but I am not even sure of that (as nothing appears in the console after "booting the kernel").
Here is the full console log:
U-Boot SPL 2013.10-rc4-ge4bc4c3 (Dec 18 2014 - 14:55:42) Boot Device: SD1 spl: error reading image u-boot.img, err - -1 Load image from RAW... U-Boot 2013.10-rc4-ge4bc4c3 (Dec 18 2014 - 14:55:42) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: MX6-CuBox-i DRAM: 2 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: vga Err: vga Net: FEC [PRIME] (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found Hit any key to stop autoboot: 0 mmc0 is current device ** File not found /boot.scr ** ** File not found /uEnv.txt ** ** File not found /zImage ** ** File not found /uImage ** 1816 bytes read in 127 ms (13.7 KiB/s) Running bootscript from mmc ... ## Executing script at 10800000 ** File not found .next ** 48 bytes read in 114 ms (0 Bytes/s) 36853 bytes read in 826 ms (43 KiB/s) 4636514 bytes read in 411 ms (10.8 MiB/s) 5839840 bytes read in 482 ms (11.6 MiB/s) Kernel image @ 0x10800000 [ 0x000000 - 0x591be0 ] ## Loading init Ramdisk from Legacy Image at 14800000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 4636450 Bytes = 4.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800bff4 Starting kernel ... Uncompressing Linux... done, booting the kernel.
Files located in /boot on the SDCard (same files list in sda/boot):
-rw-r--r-- 1 root root 48 janv. 30 18:28 armbianEnv.txt -rw-r--r-- 1 root root 79 janv. 30 18:28 armbianEnv.txte -rw-r--r-- 1 root root 1,8K sept. 20 22:33 boot.cmd -rw-r--r-- 1 root root 1,8K sept. 20 22:33 boot.scr -rw-r--r-- 1 root root 360 déc. 27 2015 boot.txt -rw-r--r-- 1 root root 160K févr. 8 09:33 config-4.14.98-cubox -rw-r--r-- 1 root root 162K févr. 8 09:38 config-4.19.20-cubox lrwxrwxrwx 1 root root 17 févr. 16 17:47 dtb -> dtb-4.19.20-cubox drwxr-xr-x 2 root root 12K févr. 16 17:42 dtb-4.14.98-cubox drwxr-xr-x 2 root root 12K févr. 16 17:31 dtb-4.19.20-cubox -rw-r--r-- 1 root root 4,2M févr. 16 17:09 initrd.img-4.14.98-cubox -rw-r--r-- 1 root root 4,5M févr. 16 17:09 initrd.img-4.19.20-cubox -rw-r--r-- 1 root root 2,5M févr. 8 09:33 System.map-4.14.98-cubox -rw-r--r-- 1 root root 2,6M févr. 8 09:38 System.map-4.19.20-cubox lrwxrwxrwx 1 root root 21 févr. 16 17:47 uInitrd -> uInitrd-4.19.20-cubox -rw-r--r-- 1 root root 4,2M févr. 16 17:09 uInitrd-4.14.98-cubox -rw-r--r-- 1 root root 4,5M févr. 16 17:09 uInitrd-4.19.20-cubox -rwxr-xr-x 1 root root 5,4M févr. 8 09:33 vmlinuz-4.14.98-cubox -rwxr-xr-x 1 root root 5,6M févr. 8 09:38 vmlinuz-4.19.20-cubox lrwxrwxrwx 1 root root 21 févr. 16 17:48 zImage -> vmlinuz-4.19.20-cubox
$ more boot.txt setenv bootargs root=/dev/sda1 rootfstype=ext4 rootwait console=tty1 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi ahci_imx.hotplug=1 consoleblank=0 vt .global_cursor_default=0 quiet ext2load mmc 0 0x18000000 /boot/dtb/${fdt_file} ext2load mmc 0 0x12000000 /boot/zImage bootz 0x12000000 - 0x18000000
$ more armbianEnv.txt verbosity=1 rootdev=/dev/sda1 usbstoragequirks=
What else could I provide as information to get help?
Thanks a lot to anybody that could give me some support...
Link to comment
Share on other sites
4 answers to this question
Recommended Posts