Jump to content

Fun Board - Qualcomm ipq4029...


sfx2000

Recommended Posts

Quad Cortex-A7, 512MB DDR3L RAM, 16Mb SPI-NOR, and 8GB eMMC, 3 ports GBe - WiFI is 802.11 a/b/g/n/ac on ath10k

 

(2 stream ath10k WiFi - so it's essentially an AC1300 class device supporting MU-MIMO)

 

It's 12VDC@1.5A

cat /proc/cpuinfo
processor	: 0
model name	: ARMv7 Processor rev 5 (v7l)
BogoMIPS	: 26.81
Features	: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xc07
CPU revision	: 5

Can do close to wirespeed on NAT... Iperf3 numbers

Downlink

[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   955 MBytes   801 Mbits/sec    3             sender
[  4]   0.00-10.00  sec   951 MBytes   798 Mbits/sec                  receiver

Uplink

[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   982 MBytes   824 Mbits/sec   13             sender
[  4]   0.00-10.00  sec   980 MBytes   822 Mbits/sec                  receiver

Openssl Numbers

openssl speed sha256 aes-128-cbc rsa2048

OpenSSL 1.0.2h  3 May 2016
built on: reproducible build, date unspecified
options:bn(64,32) rc4(ptr,char) des(idx,cisc,2,long) aes(partial) blowfish(ptr) 
compiler: arm-openwrt-linux-uclibcgnueabi-gcc -I. -I.. -I../include  -fPIC -DOPENSSL_PIC -DZLIB_SHARED -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -I/home/han/item/open53/qsdk/staging_dir/target-arm_cortex-a7_uClibc-1.0.14_eabi/usr/include -I/home/han/item/open53/qsdk/staging_dir/target-arm_cortex-a7_uClibc-1.0.14_eabi/include -I/home/han/item/open53/qsdk/staging_dir/toolchain-arm_cortex-a7_gcc-4.8-linaro_uClibc-1.0.14_eabi/usr/include -I/home/han/item/open53/qsdk/staging_dir/toolchain-arm_cortex-a7_gcc-4.8-linaro_uClibc-1.0.14_eabi/include -DOPENSSL_SMALL_FOOTPRINT -DHAVE_CRYPTODEV -DOPENSSL_NO_ERR -DTERMIOS -Os -pipe -march=armv7-a -mtune=cortex-a7 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=soft -Wl,-z,now -Wl,-z,relro -fpic -I/home/han/item/open53/qsdk/package/libs/openssl/include -fomit-frame-pointer -Wall

The 'numbers' are in 1000s of bytes per second processed.
type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes
aes-128 cbc       9423.91k     9787.40k     9849.26k     9908.83k     9885.01k
sha256            1446.98k     5034.50k     8936.88k    11096.75k    12000.32k
                  sign    verify    sign/s verify/s
rsa 2048 bits 0.083250s 0.002072s     12.0    482.7

Runs OpenWRT already - they're still sorting out some issues related to the QSDK and merging what they can...

 

Might actually be a better board than EspressoBIN for routing purposes...

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines