Jump to content

Armbian-Config > System doesn't show "Hardware" as a menu option


Devocion

Recommended Posts

I downloaded Armbian_5.59_Orangepizero_Ubuntu_xenial_default_3.4.113.img, and am running it with a 16GB SD card. I am trying to modify the I2C settings, however, when I type `armbian-config`, and select `System`, there is no "Hardware" menu option. This contradicts the documentation: Hardware is supposed to be an option in that menu.

 

This is the current content of the /boot/armbianEnv.txt:

verbosity=1
console=both
overlay_prefix=sun8i-h3
overlays=usbhost2 usbhost3
rootdev=UUID=54dfde69-e472-48dd-a099-636a963154f3
rootfstype=ext4
usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u

 

Edited by Devocion
Link to comment
Share on other sites

@Igor I think this is different than the issue 33 that you linked to, because that issue allows the user to select Hardware, but once selected, all the entries are empty. My case is different because Hardware isn't even an option in the System settings:

 

image.png.33835aca71769187d82d5ec3f95736fc.png

Link to comment
Share on other sites

On 2/21/2019 at 8:01 PM, Devocion said:

If you have the same issue, I'd recommend running:


Well, this means you have break system due to upgrading a kernel package and not installing DTB. For a DEVelopment kernel. Clean images must come with this package.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines