installing OP5 NMVE boot
Couldn't booti from NVME with armbian-config or armbian-install, finally I could do it, a dirty easy and convoluted following way. No details about burning stuff
This is what I did
1) boot system from fresh downloaded SD (Armbian Jammy Desktop)
2) NVME setup (sudo gparted)
- if empty create a partition table (GPT)
if not delete all partitions
- create 256MB FAT16 partition (nvme0n1p1)
- create EXT4 partition (nvme0n1p2)
- optionally
I finally got back to re-doing my install. I removed all partitions on the NVMe and then recreated two partitions, one 58GB and the other the remaining space. I then ran armbian-install and selected 4, Boot from MTD Flash - system on SATA/USB/NVMe, it proceeded to ask for the destination. I selected /dev/nvme0n1p1. A warning was displayed that everything on that parition would be erased. It then asked what filesystem and I selected ext4. It then copied the root fs to this partition. After