OrangePI PC+ not booting from eMMC after an update
Hi,
Is there a way to fix emmc booting problem from uboot itself, i've updated armbian and now orangepi pc+ doesn't boot, i've connected uart and i see that it reads /boot/boot.scr from mmc 1, but then tries to load stuff from mmc 0, so i guess my boot.scr got overwritten by default one .. or something.
boot shows this
=> boot
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3565 byt
I couldn't recreate. My board boots fine after the upgrade:
Most likely /boot/boot.scr is corrupted. Also, proper rootdev=UUID=xxxxxxxxxxxxxxxxxxxxxx for eMMC must exists in /boot/armbianEnv.txt
There is really no any extra magic - u-boot , boot script which loads kernel .. and we are only not getting to the kernel loading commands which are in the script.