Armbian for RK3399
To start the system enough to download, unzip, burn the image to the SD card. Connect the SD card to the EDGE and turn the power on.
The system starts automatically. Details on the initial setup of the running system can be found in these topics.
https://yadi.sk/d/ie_dx5x_w2xUIQ
https://mega.nz/#F!n1hihSKT!8kYublAPG4RtwSIBihOkVg
New version 20191011 of Armbian and Libreelec with support to run from USB media on RK3399.
It makes it easy to test different systems without using SD card, using normal USB flash drives. Tested on EDGE. How to use USB start-up. There are two ways to use. Test, for the overall evaluation of the launch with USB on new models of TV boxes or SBC. You need to write a new image to the SD card (if necessary, configure the correct dtb), check the system startup on the device from the SD ca