Orange Pi Zero Plus2 H5 hardware oddity in VDD_CPUX power circuit
I recently purchased a number of Orange Pi and Nano Pi boards, and discovered the awesome work of the Armbian team :-) The Orange Pi Plus2 H5 is a rather nice board - built in eMMC, H5, etc. (I wish it had 1GB of RAM but that's a different subject.) I'd love to use these boards for a number of projects.
As a test, I modified the DTS for the board (mainline kernel) to enable support for the 1.1v/1.3v switch for VDD-CPUX using the SY8113B on the board. I also enabled the allowed cl
Hi @rusatch - yes, however this is actually even easier to enable now; no patching and custom kernels should be needed If you build Armbian from the latest top-of-tree for a sunxi device (starting with the 4.17.y kernel), two new DT overlays are provided that you can load via "/boot/armbianEnv.txt" that provide this regulator and will enable higher clock speeds to be used. The original thread regarding this (with instructions) can be found here: https://forum.armbian.com/topic/5051-nanopi-ne
-
Reputation Points