Ben_der Posted October 11, 2015 Posted October 11, 2015 Hi There ! Finally managed to Get the Cubox up& running well . Upgraded from Wheezy to Jessie . Still Stock 3.14.14 Kernel. Well, next step: The graphics card/hardware acceleration. Is there a quite straight "Do this,get that, then do that" howto to get it working ? Thanks so far! ###edit### Things are geting quite weirder today. Did a further SD-Card with Cubox-i_Debian_2.6_wheezy_3.14.14 to get GPU-Suppport by the Wheezy releases . corrected sources: deb http://repo.maltegrosse.de/BSP:/Cubox-i/Debian_Wheezy/ ./deb-src http://repo.maltegrosse.de/BSP:/Cubox-i/Debian_Wheezy/ ./ apt-get update / upgrade Did apt-get install imx6-config So far so good. Started imx6-config. On Istalling a GUI it tells me that the installed version is jessie and unsupported. cat /etc/debian_version tells me: 8.2. Well yes - that is Jessie... Houston, we got a problem here.. I only want an accelerated Desktop on that thing - quite challenging. ######edit###### Wellwell - maybe next time i should take a better look.. Now staging Armbian_4.4_Cubox-i_Debian_wheezy_3.14.53 Taking the next shot now.. lets see.. It is a 7.9 = Wheezy.. . W: GPG error: http://repo.maltegrosse.de./ Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY BB98E928B246D9BF *whistle* well apt-get install imx6-config works *whistle* O.K. - after Xorg & LXDE everything fine. Vivante appearing in logs. Performance test with openarena and videos later on..
Recommended Posts