rt1k

Hi Igor, just for your reference this is the boot msg with u-boot 2016.05 (Linux bananapim2 4.6.2-sunxi #13 SMP Sun Jun 19 16:22:09 CEST 2016 armv7l GNU/Linux) many thanks for your work and support. regards. rt1k ------------------ U-Boot SPL 2016.05-armbian (Jun 20 2016 - 14:41:50) DRAM: 1024 MiB Trying to boot from MMC1 U-Boot 2016.05-armbian (Jun 20 2016 - 14:41:50 +0200) Allwinner Technology CPU: Allwinner A31s (SUN6I) Model: Sinovoip BPI-M2 DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 HDMI connected: Setting up a 1680x1050 dvi console (overscan 0x0) In: serial Out: vga Err: vga Net: eth0: ethernet@01c30000 <--------- here !!!! starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 scanning bus 0 for devices... 5 USB Device(s) found Hit any key to stop autoboot: 0 =>

Hi guys, i've the following problem in my attempt to customize/study armbian: - succesfully compiled Armbian_5.17_Bananapim2_Debian_jessie_4.8.0 on Ubuntu 16.04 with default config; - burned image on SD card, (on the same card burned with Armbian_5.14_Bananapim2_Debian_jessie_4.6.2_desktop and the system boot is ok) - the board enter in this reset loop: U-Boot 2016.07-armbian (Sep 11 2016 - 10:06:05 +0200) Allwinner Technology CPU: Allwinner A31s (SUN6I) Model: Sinovoip BPI-M2 DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment HDMI connected: Setting up a 1680x1050 dvi console (overscan 0x0) In: serial Out: vga Err: vga Net: data abort pc : [<7ef5f708>] lr : [<00000000>] reloc pc : [<4a001708>] lr : [<cb0a2000>] sp : 7af36f7c ip : 7efabe89 fp : 00000017 r10: 7efab885 r9 : 7af3dee8 r8 : 000040a0 r7 : 7ef9ee14 r6 : 00000000 r5 : 00000001 r4 : 00000000 r3 : 0000000f r2 : 00000001 r1 : 00000000 r0 : ea00000e Flags: nzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... what's wrong ? cheers rt1k