Search the Community

Showing results for tags 'important'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Technical support
    • Getting started
    • Allwinner A20
    • Allwinner H2 & H3
    • Amlogic
    • Freescale
    • Rockchip
    • Other boards
    • Common issues
  • Community forums
    • Peer to peer technical support
    • TV boxes
    • General chit chat
  • Development
    • Allwinner H2 & H3 mainline
    • Allwinner A64 & H5
    • Development

Marker Groups

  • Members

Found 65 results

  1. Hi, On the main site: https://www.armbian.com/ it says only 60 days to go for the next release :-) Well, to have a good user experience and squash bugs I think we should do a feature-freeze from about day 50 onwards - what is your take on that ? To do so, I was thinking about how you could handle this period on Github. Will “pull request’s” after feature-freeze be tagged for later integration? Everybody is welcome in squashing bugs (only the ones in code) eg. updating or adding configuration file for armbianmonitor ? eg. updating or adding information to the documentation ? Last but not least, if you can help with some ‘stubborn’ code or improvement here or here ? If you support this upcoming release just a little - it will become a great release for you too Did you already pick one from the above or do you know a dark corner in armbian you always wanted to do some clean up? Now is the time to do that. Post your idea here, write on github or simply fork the project on github and submit your pull request Tido
  2. https://forum.armbian.com/index.php?/topic/3945-mmc-no-card-present-error-on-allwinner-boards
  3. Symptoms: Board does not boot Armbian from inserted SD card, but may boot other distributions (based on old/legacy u-boot). Following or similar output can be grabbed from the serial console: U-Boot SPL 2017.01-armbian (Feb 02 2017 - 03:04:04) DRAM: 2048 MiB Trying to boot from MMC1MMC: no card present spl: mmc init failed with error: -123 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### The key message here is "MMC: no card present" Most likely cause: Malfunctioning microSD slot card detect switch. It can be verified either visually (with a magnifying glass) or electronically (with a multimeter) - at least in the slots used on Orange Pi boards and on Pine64 the pin near the switch should be shorted to the ground (i.e. SD slot casing) when card is inserted. Illustration (example) of a working switch: Verification (with a multimeter): Probe 1 - slot pin near the switch (may be different for different slot types, but at least true for Oranges and Pine64) Probe 2 - microSD slot casing or other parts connected to GND (not shown on the photo) No card - circuit is open Card inserted - circuit is shorted Photos - card is not inseted on the left and is fully inserted on the right: Orange Pi Pine64 (switch is more visible) Can it be fixed? Yes if the switch is not broken completely, by carefully adjusting (bending) the stationary contact (left on the pictures and photos, it usually is a part of the SD slot casing) i.e using a needle so it touches the moving contact (mostly hidden inside the slot on the photos) when card is inserted and not touching it when it is not inserted.
  4. Hi I want to build armbian for nanopi neo with a different mainline. What I have done is 1. added lib.config file in userpatches with statement ARMBIAN_MAINLINE_KERNEL_VERSION='4.9' that didn't work, I still get a 4.10.1 kernel build 2. then changed configration.sh ARMBIAN_MAINLINE_KERNEL_VERSION='4.9' that didn't work either, I got 4.10.1 kernel build Any other tricks? -jerry
  5. 8192cu on OPI Lite

    Hello, I'm using armbian 5.25 on OPI Lite and wifi dongle 8192cu, after instaling these drivers: https://github.com/pvaret/rtl8192cu-fixes I saw that the interface drop half of the packages.... Can someone provide better drivers or tell me how to fix that? wlan1 Link encap:Ethernet HWaddr 00:13:ef:6b:24:e2 inet addr:192.168.100.7 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::213:efff:fe6b:24e2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 -------->>>>>> RX packets:22255 errors:0 dropped:20602 overruns:0 frame:0 TX packets:22 errors:0 dropped:2 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3853233 (3.6 MiB) TX bytes:2734 (2.6 KiB) And not everytime it takes IP ?!?! Also whatever dongle i use it won't go up automatically and it's necessary to do ifconfig wlan1 down and after that ifconfig wlan1 up
  6. Hello , I have a Adafruit TFP401 HDMI/DVI converter module. On my orange pi pc plus with Armbian kernel 3.4.113, i changed resolution to 800x480 on script.bin file and screen doesn't fit, it has margin from left. anyone help me ? Module https://learn.adafruit.com/adafruit-tfp401-hdmi-slash-dvi-decoder-to-40-pin-ttl-display/overview Screenshot http://hizliresim.com/yEAaoy
  7. USB Devices on 5.25 doesn't work well

    Hello I have a little problem with the usb devices, i use usb camera and if u plug the power supply to the OPI Lite board (5.25) it recognize the camera but it doesn't work well (stream with like 8-10 fps), after a software reboot, the device go to other Bus and the camera work fine with 15-30 fps stream. Before reboot, exact on first power of the board: Bus 006 Device 002: ID 058f:3822 Alcor Micro Corp. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter After reboot: Bus 003 Device 002: ID 058f:3822 Alcor Micro Corp. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter I try to remove and after that load again uvcvideo driver, but nothing happened, i tried some scripts to restart the usb ports but the result was 0, only if i unplug and plug the camera again or reboot solve the problem. Also i tried with different power supplies and nothing changed. Currently we use chargers from the Orange Pi manufacture so this is the best power supply i guess. Any ideas how can i configure the camera to be on Bus 3 and tha wifi dongle to be on Bus 2 or some other solution to the problem?
  8. Permissions Problem on 5.25

    Hello, I'm using OPI Lite with 5.25 armbian and there is a little problem with the permissions: root@orangepilite:~/Raws/libjpeg/jpeg-8c# ./configure -bash: ./configure: Permission denied root@orangepilite:~/Raws/libjpeg/jpeg-8c# sudo ./configure sudo: ./configure: command not found root@orangepilite:~/Raws/libjpeg/jpeg-8c# ls | grep configure configure configure.ac That appeared to me twice, first time i compile and install nodejs and npm was not recognized like a command (ask for permissions after use sudo just said command not found), this is my second hit to that problem, trying to compile libjpeg. I try to gi to root owners for that folder, same results, I try to cp the files and then compile it, same results and so on and so on. Can someone explain me from where these problems are coming?
  9. With Debian LTS, updates at least every week. Signatures don't work Stupid, childish pictures for idiots,called captchas are not shown security (!) checks can't be used. No administors can be reached because of github. Never. neve again answer this, I can't be reached in this forum. I can be reached by gleam@i2pmail.org being much more secure than all zhe securitythingies in this forum. Well, I do have a question armbianspecific: When will gnuit be made working for armbian? Oh and another one: Sinfo doesn't show the frequency of the CPU - to be made working. Why can't emails be sent to operators to be inserted in forum? Bye.
  10. ILI9341 TFT Screen Cut off fix?

    Hi everyone i got my ILI9341 TFT 2.4" display to work on armbian but the screen is cut off? i have no idea on how to fix this Orange Pi One
  11. Armbian_5.20_Bananapipro_Debian_jessie_4.7.3 Armbian_5.20_Bananapipro_Debian_jessie_4.7.3_desktop both images are not working on my bananapro. Actually when I tried the first time they worked properly but after that time when i tested other images from lemaker links. After from that time no armbian images are working. keyboard and mouse are not able to power up. Also it showing swap on /var/swap. Priority:-1 extents 1 across 131068k SSFS and keep waiting there only. Please help me i was successfully able to build can4linux on armbian Debian desktop 4.7 which is not at all possible on other images.
  12. I received the BPI M2 Ultra a couple of days ago (thanks to Nora Lee for the board) and worked a while on the BSP to learn and apply some of our changes on the ov5640 driver to be able to use Auto Focus and see if i could get Guvcview working on it. Here are some of my findings: * Working with the BSP is very similar to what we were used to on the Cubieboard A10/A20 era, those who worked with BSP at that time will feel very comfortable. * As usual, the BSP used arm-linux-gnueabi to compile the u-boot and kernel, i think is the Android way, and parses FEX to build a DTB. (Thanks to my old dual-core PC running Lubuntu). * It is hard to know where to change in the BSP to get your changes applied to DTB, it is a trial and error but once you learn and know how to bypass the bugs you can get it working your way. * working with BSP is not trivial I am not as expert as @tkaiser to squeeze the board and do some benchmarks the right way or brush the bits, i just wanted to get the Camera working and compare to what we have so far, one nice thing about the board is it runs way cooler than H3 at 1200Mhz. What i did so far: * compiled u-boot and kernel with armhf (don't ask me about mali driver and 3D things, it compiled but i did not tested) * applied some changes on ov5640 for AF and to work with MPJPG-streamer * compiled Guvcview as the usual way Issues: * For some unknown reason ION memory manager fails most of the times, need a way to extend the contiguous memory, anyone have any idea how to? * Guvcview have trouble and core dumps most of the times, need to investigate it. * MJPG-Streamer works better, thanks to FriendlyArm work. * AF works, perhaps a bit slower or just because we can not change AF zone as we can in Android with the Touch. But i think it works nice with good light condition if you want close up. Here are some samples you can have a look and see AF working and the state of Cedrus. 1920x1080 MP4 (cedrus264) https://drive.google.com/open?id=0B7A7OPBC-aN7SkZjaUdHaDNUQnM 800x600 MP4 (cedrus264) https://drive.google.com/open?id=0B7A7OPBC-aN7NTVnN1B3QXpRcUU What next? * Apply these changes on OV5640 (Armbian) * Improve the OV5640, i realized Enhanced OV5640 runs a bit hot (may be too hot) with AF. Guvcview with AF in action: https://drive.google.com/open?id=0B7A7OPBC-aN7RGxUN25ER0ZHWGM And finally Let's test Guvcview with FA A64 soon....
  13. We would like to thanks all of those who participated in our small contest. Great submission! It was really hard to make a cherry pick, while the winner will be chosen by the vote. Since we only need one default wallpaper and that one must be as generic and clean as possible, this choice is as follows. Few others, which might come into action, had either too small text size, strange colors or were simply too busy. We might will add more than those five wallpapers to our desktop or use them as a boot splash. Vote will be online until 16.12. 1. Dre0x-Minum-dark 2. chzbacon-Micro-SD 3. chzbacon-Linen---Dark 4. 1430-very-dark 5. username-dark
  14. dpms force off doesn't work

    Hi Friends, on Banian I was using "xset dmps force off" and "xset dpms force on" to switch display off and on as I need it. Tryed to use this commands in terminal with armbian but nothing happens. I'm using LeMakers 5" LCD RGB Display with PCAP Touch. Armbian is 5.24 jessi with desktop and 4.8.12 Kernel. Has anyone an Idea, how to turn off and on display form terminal? Yours, Martin
  15. Hi I've just set up the Roseapple Pi with Armbian (legacy server Debian). As I often find (over a range of monitors) there's an overscan so bad I can't see the "login" instructions at the bottom of the screen... on all sides the text is off the edge of the screen. For the life of me I can't see WHERE to adjust the overscan - can anyone help. Pete.
  16. Hi, I updated my cubietruck jessie to 5.23. update successful but no boot on kernel . I boot on sd card and mount nand . no uImage but an zImage. I use mkimage in order to generate uImage and it work. kernel packaging must be corrected.
  17. Well well well, I have been setting up my BananaPro and all that is missing for me is to have it ready to run a QT Application that I'm building. For that I have followed all the package helps and such to have the Bpro ready to run them. Problem is that when I run the infamous test /test inside ./sunxi-mali I get the error: ERROR: eglInitialize failed! Looking at it I've concluded that there is a problem with gcc, but more specifically the fbturbo hasn't even been built properly. When I look at the config file within fbturbo after running ./configure i get this: confidure:3357: gcc -qversion >&5 gcc: error: unrecognized command line option '-V' gcc: fatal error: no input files compilation terminated .... ... gcc: error: unrecognized command line option '-qversion' Any ideas? Thanks in advance!
  18. Power Management Banana Pi

    Hi specialists, I'm trying to understand how the axp209 on Banana Pi works with the A20. In the Banana Pi schematics I see, that they are connected with only four lines. Two lines are used for I²C (TWSI), one is from axp209 PWROK to RESET# of A20 and another one is connected from axp209 IRQ and GPIO2 to NMI# of A20. When system is off and I press my Power Button (K1) on the Pi, the system is booting. System is running and I long press the Power Button, System shuts down. But can anyone say whats happening? What does axp209 do with IRQ, GPIO2 and PWROK pins? Wich way does the A20 recognize, that it has to shutdown? Yours Martin
  19. Duplicated in another thread...Never mind.
  20. Can't find axp209 in sysfs

    Hi Guys, a few weeks ago, I implemented a project wich reads the power sources of my Banana Pi. I was using /sys/power/axp_pmu/. I now made a new build to enable lcd display and such things. But now /sys/power/axp_pmu/ isn't there. Also can't find it anywhere in my system. Only /sys/power/{pm_async, pm_freeze_timeout, state, wakeup_count} Kernel of new build is 4.8.0 What have I to do, to get axp_pmu back? Martin
  21. This is my first impression with the ov8865, a 8MP sensor running on kernel 3.4.39 (linux-sunxi). I am running Banana Pi - M3 with the dual camera extension on Ubuntu Xenial rootfs and with the stock driver. The driver have not been touched because information is scarce and i asked @lvmc for some datasheet. This sensor is a 4 lane CSI2 (MIPI) that has a good performance at high resolution. I am able to get 30 FPS on all available win sizes. I have ran a small v4l2 application to have some benchmarks but guvcview with some minor update is able to display video from the sensor just as we have for the ov5640: TEST 0 ( 3264 x 2448 ) ---- cap parameters ----- width: 3264 height: 2448 v4l2 buffers: 8 exposure: -999 hflip: -1 vflip: -1 Mode: V4L2_MODE_VIDEO Driver: "sunxi-vfe" Card: "sunxi-vfe" Bus: "sunxi_vfe sunxi_vfe.0" Version: 1.0 Capabilities: 05000001 Input: 0 V4L2 pixel formats: 0: [0x50323234] '422P' (planar YUV 422) 1: [0x32315559] 'YU12' (planar YUV 420) 2: [0x32315659] 'YV12' (planar YVU 420) 3: [0x3631564E] 'NV16' (planar YUV 422 UV combined) 4: [0x3231564E] 'NV12' (planar YUV 420 UV combined) 5: [0x3136564E] 'NV61' (planar YUV 422 VU combined) 6: [0x3132564E] 'NV21' (planar YUV 420 VU combined) 7: [0x32314D48] 'HM12' (MB YUV420) 8: [0x56595559] 'YUYV' (YUV422 YUYV) 9: [0x55595659] 'YVYU' (YUV422 YVYU) 10: [0x59565955] 'UYVY' (YUV422 UYVY) 11: [0x59555956] 'VYUY' (YUV422 VYUY) 12: [0x31384142] 'BA81' (RAW Bayer BGGR 8bit) 13: [0x47524247] 'GBRG' (RAW Bayer GBRG 8bit) 14: [0x47425247] 'GRBG' (RAW Bayer GRBG 8bit) 15: [0x47425247] 'GRBG' (RAW Bayer RGGB 8bit) 16: [0x30314742] 'BG10' (RAW Bayer BGGR 10bit) 17: [0x30314247] 'GB10' (RAW Bayer GBRG 10bit) 18: [0x30314142] 'BA10' (RAW Bayer GRBG 10bit) 19: [0x30314142] 'BA10' (RAW Bayer RGGB 10bit) 20: [0x32314742] 'BG12' (RAW Bayer BGGR 12bit) 21: [0x32314247] 'GB12' (RAW Bayer GBRG 12bit) 22: [0x32314142] 'BA12' (RAW Bayer GRBG 12bit) 23: [0x32314142] 'BA12' (RAW Bayer RGGB 12bit) V4L2 pixel sizes: ( 3264 x 2448 ) Pixels ( 3264 x 1836 ) Pixels ( 1920 x 1080 ) Pixels ( 1280 x 720 ) Pixels ( 1600 x 1200 ) Pixels ( 800 x 600 ) Pixels ( 640 x 480 ) Pixels Sensor size: 3264x2448 pixels Pixel Format: V4L2_PIX_FMT_YUV420 [0x32315559] Frame #10 will be saved! Length: 11993088 Bytesused: 11993088 Address: 0xc37f8 FPS[0]: 13.38 Length: 11993088 Bytesused: 11993088 Address: 0xc3800 FPS[1]: 30.12 Length: 11993088 Bytesused: 11993088 Address: 0xc3808 FPS[2]: 29.47 Length: 11993088 Bytesused: 11993088 Address: 0xc3810 FPS[3]: 30.10 Length: 11993088 Bytesused: 11993088 Address: 0xc3818 FPS[4]: 28.36 Length: 11993088 Bytesused: 11993088 Address: 0xc3820 FPS[5]: 28.52 Length: 11993088 Bytesused: 11993088 Address: 0xc3828 FPS[6]: 34.09 Length: 11993088 Bytesused: 11993088 Address: 0xc3830 FPS[7]: 30.11 Length: 11993088 Bytesused: 11993088 Address: 0xc37f8 FPS[8]: 30.02 Length: 11993088 Bytesused: 11993088 Address: 0xc3800 FPS[9]: 1.08 ------- Avg FPS: 30.10 -------- TEST 1 ( 3264 x 1836 ) ---- cap parameters ----- width: 3264 height: 1836 v4l2 buffers: 8 exposure: -999 hflip: -1 vflip: -1 Mode: V4L2_MODE_VIDEO Driver: "sunxi-vfe" Card: "sunxi-vfe" Bus: "sunxi_vfe sunxi_vfe.0" Version: 1.0 Capabilities: 05000001 Input: 0 V4L2 pixel formats: 0: [0x50323234] '422P' (planar YUV 422) 1: [0x32315559] 'YU12' (planar YUV 420) 2: [0x32315659] 'YV12' (planar YVU 420) 3: [0x3631564E] 'NV16' (planar YUV 422 UV combined) 4: [0x3231564E] 'NV12' (planar YUV 420 UV combined) 5: [0x3136564E] 'NV61' (planar YUV 422 VU combined) 6: [0x3132564E] 'NV21' (planar YUV 420 VU combined) 7: [0x32314D48] 'HM12' (MB YUV420) 8: [0x56595559] 'YUYV' (YUV422 YUYV) 9: [0x55595659] 'YVYU' (YUV422 YVYU) 10: [0x59565955] 'UYVY' (YUV422 UYVY) 11: [0x59555956] 'VYUY' (YUV422 VYUY) 12: [0x31384142] 'BA81' (RAW Bayer BGGR 8bit) 13: [0x47524247] 'GBRG' (RAW Bayer GBRG 8bit) 14: [0x47425247] 'GRBG' (RAW Bayer GRBG 8bit) 15: [0x47425247] 'GRBG' (RAW Bayer RGGB 8bit) 16: [0x30314742] 'BG10' (RAW Bayer BGGR 10bit) 17: [0x30314247] 'GB10' (RAW Bayer GBRG 10bit) 18: [0x30314142] 'BA10' (RAW Bayer GRBG 10bit) 19: [0x30314142] 'BA10' (RAW Bayer RGGB 10bit) 20: [0x32314742] 'BG12' (RAW Bayer BGGR 12bit) 21: [0x32314247] 'GB12' (RAW Bayer GBRG 12bit) 22: [0x32314142] 'BA12' (RAW Bayer GRBG 12bit) 23: [0x32314142] 'BA12' (RAW Bayer RGGB 12bit) V4L2 pixel sizes: ( 3264 x 2448 ) Pixels ( 3264 x 1836 ) Pixels ( 1920 x 1080 ) Pixels ( 1280 x 720 ) Pixels ( 1600 x 1200 ) Pixels ( 800 x 600 ) Pixels ( 640 x 480 ) Pixels Sensor size: 3264x1836 pixels Pixel Format: V4L2_PIX_FMT_YUV420 [0x32315559] Frame #10 will be saved! Length: 8994816 Bytesused: 8994816 Address: 0x1543c00 FPS[0]: 12.07 Length: 8994816 Bytesused: 8994816 Address: 0x1543c08 FPS[1]: 30.11 Length: 8994816 Bytesused: 8994816 Address: 0x1543c10 FPS[2]: 29.51 Length: 8994816 Bytesused: 8994816 Address: 0x1543c18 FPS[3]: 28.47 Length: 8994816 Bytesused: 8994816 Address: 0x1543c20 FPS[4]: 30.99 Length: 8994816 Bytesused: 8994816 Address: 0x1543c28 FPS[5]: 31.19 Length: 8994816 Bytesused: 8994816 Address: 0x1543c30 FPS[6]: 30.12 Length: 8994816 Bytesused: 8994816 Address: 0x1543c38 FPS[7]: 30.05 Length: 8994816 Bytesused: 8994816 Address: 0x1543c00 FPS[8]: 30.02 Length: 8994816 Bytesused: 8994816 Address: 0x1543c08 FPS[9]: 1.28 ------- Avg FPS: 30.06 -------- TEST 2 ( 1920 x 1080 ) ---- cap parameters ----- width: 1920 height: 1080 v4l2 buffers: 8 exposure: -999 hflip: -1 vflip: -1 Mode: V4L2_MODE_VIDEO Driver: "sunxi-vfe" Card: "sunxi-vfe" Bus: "sunxi_vfe sunxi_vfe.0" Version: 1.0 Capabilities: 05000001 Input: 0 V4L2 pixel formats: 0: [0x50323234] '422P' (planar YUV 422) 1: [0x32315559] 'YU12' (planar YUV 420) 2: [0x32315659] 'YV12' (planar YVU 420) 3: [0x3631564E] 'NV16' (planar YUV 422 UV combined) 4: [0x3231564E] 'NV12' (planar YUV 420 UV combined) 5: [0x3136564E] 'NV61' (planar YUV 422 VU combined) 6: [0x3132564E] 'NV21' (planar YUV 420 VU combined) 7: [0x32314D48] 'HM12' (MB YUV420) 8: [0x56595559] 'YUYV' (YUV422 YUYV) 9: [0x55595659] 'YVYU' (YUV422 YVYU) 10: [0x59565955] 'UYVY' (YUV422 UYVY) 11: [0x59555956] 'VYUY' (YUV422 VYUY) 12: [0x31384142] 'BA81' (RAW Bayer BGGR 8bit) 13: [0x47524247] 'GBRG' (RAW Bayer GBRG 8bit) 14: [0x47425247] 'GRBG' (RAW Bayer GRBG 8bit) 15: [0x47425247] 'GRBG' (RAW Bayer RGGB 8bit) 16: [0x30314742] 'BG10' (RAW Bayer BGGR 10bit) 17: [0x30314247] 'GB10' (RAW Bayer GBRG 10bit) 18: [0x30314142] 'BA10' (RAW Bayer GRBG 10bit) 19: [0x30314142] 'BA10' (RAW Bayer RGGB 10bit) 20: [0x32314742] 'BG12' (RAW Bayer BGGR 12bit) 21: [0x32314247] 'GB12' (RAW Bayer GBRG 12bit) 22: [0x32314142] 'BA12' (RAW Bayer GRBG 12bit) 23: [0x32314142] 'BA12' (RAW Bayer RGGB 12bit) V4L2 pixel sizes: ( 3264 x 2448 ) Pixels ( 3264 x 1836 ) Pixels ( 1920 x 1080 ) Pixels ( 1280 x 720 ) Pixels ( 1600 x 1200 ) Pixels ( 800 x 600 ) Pixels ( 640 x 480 ) Pixels Sensor size: 1920x1080 pixels Pixel Format: V4L2_PIX_FMT_YUV420 [0x32315559] Frame #10 will be saved! Length: 3117056 Bytesused: 3117056 Address: 0x1f0b6e0 FPS[0]: 14.37 Length: 3117056 Bytesused: 3117056 Address: 0x1f0b6e8 FPS[1]: 30.12 Length: 3117056 Bytesused: 3117056 Address: 0x1f0b6f0 FPS[2]: 29.51 Length: 3117056 Bytesused: 3117056 Address: 0x1f0b6f8 FPS[3]: 28.00 Length: 3117056 Bytesused: 3117056 Address: 0x1f0b700 FPS[4]: 31.51 Length: 3117056 Bytesused: 3117056 Address: 0x1f0b708 FPS[5]: 31.29 Length: 3117056 Bytesused: 3117056 Address: 0x1f0b710 FPS[6]: 30.03 Length: 3117056 Bytesused: 3117056 Address: 0x1f0b718 FPS[7]: 30.06 Length: 3117056 Bytesused: 3117056 Address: 0x1f0b6e0 FPS[8]: 30.04 Length: 3117056 Bytesused: 3117056 Address: 0x1f0b6e8 FPS[9]: 3.44 ------- Avg FPS: 30.07 -------- TEST 3 ( 1600 x 1200 ) ---- cap parameters ----- width: 1600 height: 1200 v4l2 buffers: 8 exposure: -999 hflip: -1 vflip: -1 Mode: V4L2_MODE_VIDEO Driver: "sunxi-vfe" Card: "sunxi-vfe" Bus: "sunxi_vfe sunxi_vfe.0" Version: 1.0 Capabilities: 05000001 Input: 0 V4L2 pixel formats: 0: [0x50323234] '422P' (planar YUV 422) 1: [0x32315559] 'YU12' (planar YUV 420) 2: [0x32315659] 'YV12' (planar YVU 420) 3: [0x3631564E] 'NV16' (planar YUV 422 UV combined) 4: [0x3231564E] 'NV12' (planar YUV 420 UV combined) 5: [0x3136564E] 'NV61' (planar YUV 422 VU combined) 6: [0x3132564E] 'NV21' (planar YUV 420 VU combined) 7: [0x32314D48] 'HM12' (MB YUV420) 8: [0x56595559] 'YUYV' (YUV422 YUYV) 9: [0x55595659] 'YVYU' (YUV422 YVYU) 10: [0x59565955] 'UYVY' (YUV422 UYVY) 11: [0x59555956] 'VYUY' (YUV422 VYUY) 12: [0x31384142] 'BA81' (RAW Bayer BGGR 8bit) 13: [0x47524247] 'GBRG' (RAW Bayer GBRG 8bit) 14: [0x47425247] 'GRBG' (RAW Bayer GRBG 8bit) 15: [0x47425247] 'GRBG' (RAW Bayer RGGB 8bit) 16: [0x30314742] 'BG10' (RAW Bayer BGGR 10bit) 17: [0x30314247] 'GB10' (RAW Bayer GBRG 10bit) 18: [0x30314142] 'BA10' (RAW Bayer GRBG 10bit) 19: [0x30314142] 'BA10' (RAW Bayer RGGB 10bit) 20: [0x32314742] 'BG12' (RAW Bayer BGGR 12bit) 21: [0x32314247] 'GB12' (RAW Bayer GBRG 12bit) 22: [0x32314142] 'BA12' (RAW Bayer GRBG 12bit) 23: [0x32314142] 'BA12' (RAW Bayer RGGB 12bit) V4L2 pixel sizes: ( 3264 x 2448 ) Pixels ( 3264 x 1836 ) Pixels ( 1920 x 1080 ) Pixels ( 1280 x 720 ) Pixels ( 1600 x 1200 ) Pixels ( 800 x 600 ) Pixels ( 640 x 480 ) Pixels Sensor size: 1600x1200 pixels Pixel Format: V4L2_PIX_FMT_YUV420 [0x32315559] Frame #10 will be saved! Length: 2887680 Bytesused: 2887680 Address: 0x1fc92a8 FPS[0]: 10.73 Length: 2887680 Bytesused: 2887680 Address: 0x1fc92b0 FPS[1]: 30.09 Length: 2887680 Bytesused: 2887680 Address: 0x1fc92b8 FPS[2]: 29.56 Length: 2887680 Bytesused: 2887680 Address: 0x1fc92c0 FPS[3]: 28.96 Length: 2887680 Bytesused: 2887680 Address: 0x1fc92c8 FPS[4]: 25.95 Length: 2887680 Bytesused: 2887680 Address: 0x1fc92d0 FPS[5]: 37.94 Length: 2887680 Bytesused: 2887680 Address: 0x1fc92d8 FPS[6]: 30.03 Length: 2887680 Bytesused: 2887680 Address: 0x1fc92e0 FPS[7]: 30.02 Length: 2887680 Bytesused: 2887680 Address: 0x1fc92a8 FPS[8]: 30.07 Length: 2887680 Bytesused: 2887680 Address: 0x1fc92b0 FPS[9]: 3.10 ------- Avg FPS: 30.33 -------- TEST 4 ( 1280 x 960 ) ---- cap parameters ----- width: 1280 height: 960 v4l2 buffers: 8 exposure: -999 hflip: -1 vflip: -1 Mode: V4L2_MODE_VIDEO Driver: "sunxi-vfe" Card: "sunxi-vfe" Bus: "sunxi_vfe sunxi_vfe.0" Version: 1.0 Capabilities: 05000001 Input: 0 V4L2 pixel formats: 0: [0x50323234] '422P' (planar YUV 422) 1: [0x32315559] 'YU12' (planar YUV 420) 2: [0x32315659] 'YV12' (planar YVU 420) 3: [0x3631564E] 'NV16' (planar YUV 422 UV combined) 4: [0x3231564E] 'NV12' (planar YUV 420 UV combined) 5: [0x3136564E] 'NV61' (planar YUV 422 VU combined) 6: [0x3132564E] 'NV21' (planar YUV 420 VU combined) 7: [0x32314D48] 'HM12' (MB YUV420) 8: [0x56595559] 'YUYV' (YUV422 YUYV) 9: [0x55595659] 'YVYU' (YUV422 YVYU) 10: [0x59565955] 'UYVY' (YUV422 UYVY) 11: [0x59555956] 'VYUY' (YUV422 VYUY) 12: [0x31384142] 'BA81' (RAW Bayer BGGR 8bit) 13: [0x47524247] 'GBRG' (RAW Bayer GBRG 8bit) 14: [0x47425247] 'GRBG' (RAW Bayer GRBG 8bit) 15: [0x47425247] 'GRBG' (RAW Bayer RGGB 8bit) 16: [0x30314742] 'BG10' (RAW Bayer BGGR 10bit) 17: [0x30314247] 'GB10' (RAW Bayer GBRG 10bit) 18: [0x30314142] 'BA10' (RAW Bayer GRBG 10bit) 19: [0x30314142] 'BA10' (RAW Bayer RGGB 10bit) 20: [0x32314742] 'BG12' (RAW Bayer BGGR 12bit) 21: [0x32314247] 'GB12' (RAW Bayer GBRG 12bit) 22: [0x32314142] 'BA12' (RAW Bayer GRBG 12bit) 23: [0x32314142] 'BA12' (RAW Bayer RGGB 12bit) V4L2 pixel sizes: ( 3264 x 2448 ) Pixels ( 3264 x 1836 ) Pixels ( 1920 x 1080 ) Pixels ( 1280 x 720 ) Pixels ( 1600 x 1200 ) Pixels ( 800 x 600 ) Pixels ( 640 x 480 ) Pixels Sensor size adjusted to: 800x600 pixels Pixel Format: V4L2_PIX_FMT_YUV420 [0x32315559] Frame #10 will be saved! Length: 724992 Bytesused: 724992 Address: 0x52f340 FPS[0]: 14.13 Length: 724992 Bytesused: 724992 Address: 0x52f348 FPS[1]: 33.46 Length: 724992 Bytesused: 724992 Address: 0x52f350 FPS[2]: 32.33 Length: 724992 Bytesused: 724992 Address: 0x52f358 FPS[3]: 27.94 Length: 724992 Bytesused: 724992 Address: 0x52f360 FPS[4]: 42.99 Length: 724992 Bytesused: 724992 Address: 0x52f368 FPS[5]: 33.27 Length: 724992 Bytesused: 724992 Address: 0x52f370 FPS[6]: 33.30 Length: 724992 Bytesused: 724992 Address: 0x52f378 FPS[7]: 33.30 Length: 724992 Bytesused: 724992 Address: 0x52f340 FPS[8]: 33.29 Length: 724992 Bytesused: 724992 Address: 0x52f348 FPS[9]: 8.38 ------- Avg FPS: 33.73 -------- TEST 5 ( 800 x 600 ) ---- cap parameters ----- width: 800 height: 600 v4l2 buffers: 8 exposure: -999 hflip: -1 vflip: -1 Mode: V4L2_MODE_VIDEO Driver: "sunxi-vfe" Card: "sunxi-vfe" Bus: "sunxi_vfe sunxi_vfe.0" Version: 1.0 Capabilities: 05000001 Input: 0 V4L2 pixel formats: 0: [0x50323234] '422P' (planar YUV 422) 1: [0x32315559] 'YU12' (planar YUV 420) 2: [0x32315659] 'YV12' (planar YVU 420) 3: [0x3631564E] 'NV16' (planar YUV 422 UV combined) 4: [0x3231564E] 'NV12' (planar YUV 420 UV combined) 5: [0x3136564E] 'NV61' (planar YUV 422 VU combined) 6: [0x3132564E] 'NV21' (planar YUV 420 VU combined) 7: [0x32314D48] 'HM12' (MB YUV420) 8: [0x56595559] 'YUYV' (YUV422 YUYV) 9: [0x55595659] 'YVYU' (YUV422 YVYU) 10: [0x59565955] 'UYVY' (YUV422 UYVY) 11: [0x59555956] 'VYUY' (YUV422 VYUY) 12: [0x31384142] 'BA81' (RAW Bayer BGGR 8bit) 13: [0x47524247] 'GBRG' (RAW Bayer GBRG 8bit) 14: [0x47425247] 'GRBG' (RAW Bayer GRBG 8bit) 15: [0x47425247] 'GRBG' (RAW Bayer RGGB 8bit) 16: [0x30314742] 'BG10' (RAW Bayer BGGR 10bit) 17: [0x30314247] 'GB10' (RAW Bayer GBRG 10bit) 18: [0x30314142] 'BA10' (RAW Bayer GRBG 10bit) 19: [0x30314142] 'BA10' (RAW Bayer RGGB 10bit) 20: [0x32314742] 'BG12' (RAW Bayer BGGR 12bit) 21: [0x32314247] 'GB12' (RAW Bayer GBRG 12bit) 22: [0x32314142] 'BA12' (RAW Bayer GRBG 12bit) 23: [0x32314142] 'BA12' (RAW Bayer RGGB 12bit) V4L2 pixel sizes: ( 3264 x 2448 ) Pixels ( 3264 x 1836 ) Pixels ( 1920 x 1080 ) Pixels ( 1280 x 720 ) Pixels ( 1600 x 1200 ) Pixels ( 800 x 600 ) Pixels ( 640 x 480 ) Pixels Sensor size: 800x600 pixels Pixel Format: V4L2_PIX_FMT_YUV420 [0x32315559] Frame #10 will be saved! Length: 724992 Bytesused: 724992 Address: 0x260368 FPS[0]: 19.52 Length: 724992 Bytesused: 724992 Address: 0x260370 FPS[1]: 33.59 Length: 724992 Bytesused: 724992 Address: 0x260378 FPS[2]: 32.32 Length: 724992 Bytesused: 724992 Address: 0x260380 FPS[3]: 31.84 Length: 724992 Bytesused: 724992 Address: 0x260388 FPS[4]: 33.39 Length: 724992 Bytesused: 724992 Address: 0x260390 FPS[5]: 35.97 Length: 724992 Bytesused: 724992 Address: 0x260398 FPS[6]: 33.34 Length: 724992 Bytesused: 724992 Address: 0x2603a0 FPS[7]: 33.30 Length: 724992 Bytesused: 724992 Address: 0x260368 FPS[8]: 33.30 Length: 724992 Bytesused: 724992 Address: 0x260370 FPS[9]: 6.94 ------- Avg FPS: 33.38 -------- TEST 6 ( 640 x 480 ) ---- cap parameters ----- width: 640 height: 480 v4l2 buffers: 8 exposure: -999 hflip: -1 vflip: -1 Mode: V4L2_MODE_VIDEO Driver: "sunxi-vfe" Card: "sunxi-vfe" Bus: "sunxi_vfe sunxi_vfe.0" Version: 1.0 Capabilities: 05000001 Input: 0 V4L2 pixel formats: 0: [0x50323234] '422P' (planar YUV 422) 1: [0x32315559] 'YU12' (planar YUV 420) 2: [0x32315659] 'YV12' (planar YVU 420) 3: [0x3631564E] 'NV16' (planar YUV 422 UV combined) 4: [0x3231564E] 'NV12' (planar YUV 420 UV combined) 5: [0x3136564E] 'NV61' (planar YUV 422 VU combined) 6: [0x3132564E] 'NV21' (planar YUV 420 VU combined) 7: [0x32314D48] 'HM12' (MB YUV420) 8: [0x56595559] 'YUYV' (YUV422 YUYV) 9: [0x55595659] 'YVYU' (YUV422 YVYU) 10: [0x59565955] 'UYVY' (YUV422 UYVY) 11: [0x59555956] 'VYUY' (YUV422 VYUY) 12: [0x31384142] 'BA81' (RAW Bayer BGGR 8bit) 13: [0x47524247] 'GBRG' (RAW Bayer GBRG 8bit) 14: [0x47425247] 'GRBG' (RAW Bayer GRBG 8bit) 15: [0x47425247] 'GRBG' (RAW Bayer RGGB 8bit) 16: [0x30314742] 'BG10' (RAW Bayer BGGR 10bit) 17: [0x30314247] 'GB10' (RAW Bayer GBRG 10bit) 18: [0x30314142] 'BA10' (RAW Bayer GRBG 10bit) 19: [0x30314142] 'BA10' (RAW Bayer RGGB 10bit) 20: [0x32314742] 'BG12' (RAW Bayer BGGR 12bit) 21: [0x32314247] 'GB12' (RAW Bayer GBRG 12bit) 22: [0x32314142] 'BA12' (RAW Bayer GRBG 12bit) 23: [0x32314142] 'BA12' (RAW Bayer RGGB 12bit) V4L2 pixel sizes: ( 3264 x 2448 ) Pixels ( 3264 x 1836 ) Pixels ( 1920 x 1080 ) Pixels ( 1280 x 720 ) Pixels ( 1600 x 1200 ) Pixels ( 800 x 600 ) Pixels ( 640 x 480 ) Pixels Sensor size: 640x480 pixels Pixel Format: V4L2_PIX_FMT_YUV420 [0x32315559] Frame #10 will be saved! Length: 466944 Bytesused: 466944 Address: 0xde03f8 FPS[0]: 12.74 Length: 466944 Bytesused: 466944 Address: 0xde0400 FPS[1]: 30.24 Length: 466944 Bytesused: 466944 Address: 0xde0408 FPS[2]: 29.19 Length: 466944 Bytesused: 466944 Address: 0xde0410 FPS[3]: 25.70 Length: 466944 Bytesused: 466944 Address: 0xde0418 FPS[4]: 31.95 Length: 466944 Bytesused: 466944 Address: 0xde0420 FPS[5]: 35.26 Length: 466944 Bytesused: 466944 Address: 0xde0428 FPS[6]: 30.04 Length: 466944 Bytesused: 466944 Address: 0xde0430 FPS[7]: 30.04 Length: 466944 Bytesused: 466944 Address: 0xde03f8 FPS[8]: 30.06 Length: 466944 Bytesused: 466944 Address: 0xde0400 FPS[9]: 6.26 ------- Avg FPS: 30.31 -------- Some output:
  22. I've try to upgrade my pi to newest version of the system yesterday, but FAILED for both apt-get upgrade or by download and write the newest image. Here is my working log: 1. apt-upgrade from armbian 5.14 image - error message indicate there's error during the apt-get update process - reboot, the boot screen shows no bootup message, than begin the TFTP startup process - wait until TFTP timeout, the system halt. 2. download and write the newest **Armbian_5.20_Bananapipro_Ubuntu_xenial_4.7.3.7z** - can be startup with the boot screen, both power led and disk io led (green led) work as expected - system halt after a few second, the power led goes off - can power on the pi by long press the power button, but as same as the first boot, powered off a few seconds after power on - the message goes too fast, can't see what exact stage it reach Right now, I've to go back to the last working image (Armbian_5.14_Bananapipro_Ubuntu_xenial_4.6.2).
  23. hello, I am running Armbian 5.17 on nanopi neo(linux kernel 3.4.112).Today I built Debian jessie 8 image using the armbian build tool. Now I am using D-link DWA123 dongle for wifi(rev d1,rtl8188eu chip).Now it didnt work out of the box(used wicd-curses for wifi setup,nothing shows up).So I decided to build the driver. I pulled the source from https://github.com/lwfinger/rtl8188eu and then I went to src directory /usr/src/linux...and ran make scripts which didnt return any error. after that I went inot rtl8188eu directory and ran make ARCH=arm and this is the reply I got, make ARCH=arm CROSS_COMPILE= -C /lib/modules/3.4.112-sun8i/build M=/home/npi/rtl8188eu modules make[1]: Entering directory '/usr/src/linux-headers-3.4.112-sun8i' Building modules, stage 2. MODPOST 0 modules make[1]: Leaving directory '/usr/src/linux-headers-3.4.112-sun8i' after that, "sudo make install" returned error and i saw that nothing was built. I tried the same in Ubuntu 14.04 trusty 3.4.112 and driver was compiled successfully but it didnt work either.The dongle is okay(I checked i on my Ubuntu Desktop and it worked) Now is this a bug??
  24. [XU4] KODI on Armbian

    Hello, I experimented with various OS-es for my new Odroid-XU4. From what I have learned I like armbian the best because it's the closest to the original debian. A clean, small, tuned up system with the possibility to switch back to sysvinit from system(d). What I would run on it is not a desktop environment but exactly Kodi. The XU4 comes with Ubuntu 16 LTS preloaded to sdcard and I can say this is the OS which maxes out the potential of this hardware. With this after an update & upgrade everything works out of the box: kodi, networking, hdmi-cec, hdmi-audio. With using the unofficial debian jessie for odroid: http://forum.odroid.com/viewtopic.php?f=114&t=17569 It is possible to put a working odroid-kodi environment together on jessie using these packages but not on armbian. Using these 3 sources: http://forum.odroid.com/viewtopic.php?t=5908&f=52 wget http://oph.mdrjr.net/meveric/sources.lists/meveric-all-XU3.list # package list for ODROID XU3 devices and all Distributions (Kernel and Headers) wget http://oph.mdrjr.net/meveric/sources.lists/meveric-jessie-main.list # package list for all ODROID devices / Debian Jessie (not for Debian Wheezy, or Ubuntu 12.04) wget http://oph.mdrjr.net/meveric/sources.lists/meveric-jessie-backports.list # package list for all ODROID devices / Debian Jessie (backports of newer or missing packages) The kodi packages install but then kodi will break with libgl error. So my question is will kodi be officially supported on armbian in the future? Armbian_5.14 ============ Linux odroidxu4 3.10.102-odroidxu4 #2 SMP PREEMPT Tue Jun 21 18:55:10 CEST 2016 armv7l GNU/Linux Module Size Used by fuse 74906 1 bonding 101352 0 cdc_ether 5022 0 usbnet 23026 1 cdc_ether r8152 60184 0 spidev 5907 0 spi_s3c64xx 14774 0 s3c2410_wdt 7601 0 init(1)-+-cron(1568) |-dbus-daemon(1697) |-dhclient(1624) |-getty(1890) |-getty(1891) |-getty(1892) |-getty(1893) |-getty(1894) |-getty(1895) |-haveged(1515) |-nmbd(1729) |-ntpd(1585) |-rsyslogd(1396)-+-{in:imklog}(1400) | |-{in:imuxsock}(1399) | `-{rs:main Q:Reg}(1401) |-smbd(1864)---smbd(1889) |-sshd(1816)---sshd(1907)---bash(1994)---pstree(2004) `-udevd(246) Ubuntu 16 LTS ============= Linux odroid 3.10.96-117 #1 SMP PREEMPT Thu Jul 28 18:28:12 UTC 2016 armv7l armv7l armv7l GNU/Linux Module Size Used by cdc_ether 4675 0 usbnet 22817 1 cdc_ether r8152 53542 0 ina231_sensor 9048 0 i2c_s3c2410 9423 0 Section "Device" Identifier "Mali-Fbdev" Driver "armsoc" Option "fbdev" "/dev/fb0" Option "Debug" "false" Option "DPMS" "false" EndSection Section "Screen" Identifier "Default Screen" Device "Mali-Fbdev" DefaultDepth 24 EndSection Section "ServerLayout" Identifier "Default Layout" Option "BlankTime" "0" Option "StandbyTime" "0" Option "SuspendTime" "0" Option "OffTime" "0" EndSection Section "DRI" Mode 0666 EndSection systemd(1)─┬─ModemManager(2781)─┬─{gdbus}(2818) │ └─{gmain}(2815) ├─NetworkManager(2788)─┬─dhclient(4790) │ ├─dnsmasq(2965) │ ├─{gdbus}(2840) │ └─{gmain}(2838) ├─accounts-daemon(2780)─┬─{gdbus}(2811) │ └─{gmain}(2808) ├─agetty(3156) ├─agetty(3157) ├─avahi-daemon(2810)───avahi-daemon(2858) ├─avahi-dnsconfd(2798) ├─cron(2793) ├─cups-browsed(2879)─┬─{gdbus}(2919) │ └─{gmain}(2918) ├─cupsd(6892) ├─dbus-daemon(2776) ├─dbus-daemon(3006) ├─dbus-launch(3005) ├─nmbd(3232) ├─ntpd(3159) ├─polkitd(2834)─┬─{gdbus}(2855) │ └─{gmain}(2850) ├─rsyslogd(2782)─┬─{in:imklog}(2813) │ ├─{in:imuxsock}(2812) │ └─{rs:main Q:Reg}(2814) ├─rtkit-daemon(3017)─┬─{rtkit-daemon}(3027) │ └─{rtkit-daemon}(3028) ├─smbd(3246)─┬─smbd(3247) │ └─smbd(3255) ├─snapd(2819)─┬─{snapd}(2857) │ ├─{snapd}(2859) │ ├─{snapd}(2864) │ ├─{snapd}(2866) │ ├─{snapd}(2923) │ ├─{snapd}(2925) │ └─{snapd}(2924) ├─sshd(4660)───sshd(5214)───bash(5277)───pstree(6904) ├─systemd(5221)───(sd-pam)(5226) ├─systemd-journal(1241) ├─systemd-logind(2774) ├─systemd-udevd(1304) ├─upowerd(3170)─┬─{gdbus}(3172) │ └─{gmain}(3171) ├─whoopsie(2775)─┬─{gdbus}(2874) │ └─{gmain}(2870) ├─xinit(2876)─┬─Xorg(2892)─┬─{llvmpipe-0}(2948) │ │ ├─{llvmpipe-1}(2949) │ │ ├─{llvmpipe-2}(2950) │ │ ├─{llvmpipe-3}(2951) │ │ ├─{llvmpipe-4}(2952) │ │ ├─{llvmpipe-5}(2953) │ │ ├─{llvmpipe-6}(2954) │ │ └─{llvmpipe-7}(2955) │ └─kodi-standalone(3002)───kodi(3114)───kodi.bin(3116)─┬─{AESink}(3209) │ ├─{ActiveAE}(3208) │ ├─{CECAdapter}(3260) │ ├─{CECAdapter}(3262) │ ├─{CECAdapter}(3263) │ ├─{CECAdapter}(3264) │ ├─{CECAdapter}(3265) │ ├─{EventServer}(3280) │ ├─{PeripBusCEC}(3261) │ ├─{PeripBusUSBUdev}(3266) │ ├─{TCPServer}(3281) │ ├─{Timer}(3296) │ ├─{kodi.bin}(3243) │ ├─{kodi.bin}(3259) │ ├─{kodi.bin}(3273) │ ├─{kodi.bin}(3276) │ ├─{kodi.bin}(3277) │ ├─{kodi.bin}(3278) │ ├─{kodi.bin}(3279) │ ├─{kodi.bin}(3286) │ ├─{kodi.bin}(6879) │ ├─{mali-event-hnd}(3216) │ ├─{mali-hist-dump}(3226) │ ├─{mali-mem-purge}(3215) │ ├─{mali-renderer}(3225) │ ├─{mali-utility-wo}(3217) │ ├─{mali-utility-wo}(3218) │ ├─{mali-utility-wo}(3219) │ ├─{mali-utility-wo}(3220) │ ├─{mali-utility-wo}(3221) │ ├─{mali-utility-wo}(3222) │ ├─{mali-utility-wo}(3223) │ └─{mali-utility-wo}(3224) └─zabbix_agentd(2929)─┬─zabbix_agentd(2930) ├─zabbix_agentd(2931) ├─zabbix_agentd(2932) ├─zabbix_agentd(2933) └─zabbix_agentd(2934) Udev KERNEL=="mali",SUBSYSTEM=="misc",MODE="0777" KERNEL=="mali0",SUBSYSTEM=="misc",MODE="0777" KERNEL=="ump",SUBSYSTEM=="ump",MODE="0777" KERNEL=="ttySAC0", SYMLINK+="ttyACM99" KERNEL=="event*", SUBSYSTEM=="input", MODE="0777" KERNEL=="CEC", MODE="0777" KERNEL=="amvideo", MODE="0666" KERNEL=="amstream*", MODE="0666" ii kodi 16.1+hk3-exynosmfc5422 armhf Open Source Home Theatre (executable binaries) ii kodi-bin:armhf 16.1+hk3-exynosmfc5422 armhf Open Source Home Theatre (architecture-dependent files) ii kodi-data 16.1+hk3-exynosmfc5422 all Open Source Home Theatre (arch-independent data package) Using meveric repos: ii kodi-odroid 16.1-1+deb8 armhf Kodi - award-winning free and open source (GPL) software media player and entertainment hub (ODROID build) ii linux-dtb-odroidxu4 5.16 armhf Linux DTB, version 3.10.102-odroidxu4 ii linux-headers-odroidxu4 5.16 armhf Linux kernel headers for 3.10.102-odroidxu4 on armhf ii linux-image-odroidxu4 5.16 armhf Linux kernel, version 3.10.102-odroidxu4 ii linux-jessie-root-odroidxu4 5.16 armhf Armbian tweaks for jessie on odroidxu4 (default branch) ii linux-u-boot-odroidxu4-default 5.16 armhf Uboot loader 2012.07 Debian Jessie 8.5 ================= Linux odroid-jessie 3.10.92+ #1 SMP PREEMPT Tue Nov 17 11:14:11 CET 2015 armv7l GNU/Linux Module Size Used by cdc_ether 4507 0 usbnet 22193 1 cdc_ether r8152 49758 0 spi_s3c64xx 13713 0 ina231_sensor 8388 0 s3c2410_wdt 7016 0 dpkg --list |grep -i kodi ii kodi-odroid 16.1-1+deb8 armhf Kodi - award-winning free and open source (GPL) software media player and entertainment hub (ODROID build) root@odroid-jessie:~# dpkg --list |grep -i systemd ii libsystemd0:armhf 215-17+deb8u4 armhf systemd utility library # X.Org X server configuration file for xfree86-video-mali Section "Device" Identifier "Mali-Fbdev" Driver "armsoc" Option "fbdev" "/dev/fb0" Option "Debug" "false" Option "DPMS" "false" Option "Fimg2DExa" "true" Option "DRI2" "true" Option "DRI2_PAGE_FLIP" "false" # Option "Fimg2DExaSolid" "false" # Option "Fimg2DExaCopy" "false" Option "Fimg2DExaComposite" "true" Option "SWcursorLCD" "false" EndSection Section "Screen" Identifier "Default Screen" Device "Mali-Fbdev" DefaultDepth 24 EndSection Section "DRI" Mode 0666 EndSection init(1)─┬─avahi-daemon(1498)───avahi-daemon(1504) ├─console-kit-dae(1628)─┬─{console-kit-dae}(1629) │ ├─{console-kit-dae}(1630) │ ├─{console-kit-dae}(1631) │ ├─{console-kit-dae}(1632) │ ├─{console-kit-dae}(1633) │ ├─{console-kit-dae}(1634) │ ├─{console-kit-dae}(1635) │ ├─{console-kit-dae}(1637) │ ├─{console-kit-dae}(1638) │ ├─{console-kit-dae}(1639) │ ├─{console-kit-dae}(1640) │ ├─{console-kit-dae}(1641) │ ├─{console-kit-dae}(1642) │ ├─{console-kit-dae}(1643) │ ├─{console-kit-dae}(1644) │ ├─{console-kit-dae}(1645) │ ├─{console-kit-dae}(1646) │ ├─{console-kit-dae}(1647) │ ├─{console-kit-dae}(1648) │ ├─{console-kit-dae}(1649) │ ├─{console-kit-dae}(1650) │ ├─{console-kit-dae}(1651) │ ├─{console-kit-dae}(1652) │ ├─{console-kit-dae}(1653) │ ├─{console-kit-dae}(1654) │ ├─{console-kit-dae}(1655) │ ├─{console-kit-dae}(1656) │ ├─{console-kit-dae}(1657) │ ├─{console-kit-dae}(1658) │ ├─{console-kit-dae}(1659) │ ├─{console-kit-dae}(1660) │ ├─{console-kit-dae}(1661) │ ├─{console-kit-dae}(1662) │ ├─{console-kit-dae}(1663) │ ├─{console-kit-dae}(1664) │ ├─{console-kit-dae}(1665) │ ├─{console-kit-dae}(1666) │ ├─{console-kit-dae}(1667) │ ├─{console-kit-dae}(1668) │ ├─{console-kit-dae}(1669) │ ├─{console-kit-dae}(1670) │ ├─{console-kit-dae}(1671) │ ├─{console-kit-dae}(1672) │ ├─{console-kit-dae}(1673) │ ├─{console-kit-dae}(1674) │ ├─{console-kit-dae}(1675) │ ├─{console-kit-dae}(1676) │ ├─{console-kit-dae}(1677) │ ├─{console-kit-dae}(1678) │ ├─{console-kit-dae}(1679) │ ├─{console-kit-dae}(1680) │ ├─{console-kit-dae}(1681) │ ├─{console-kit-dae}(1682) │ ├─{console-kit-dae}(1683) │ ├─{console-kit-dae}(1684) │ ├─{console-kit-dae}(1685) │ ├─{console-kit-dae}(1686) │ ├─{console-kit-dae}(1687) │ ├─{console-kit-dae}(1688) │ ├─{console-kit-dae}(1689) │ ├─{console-kit-dae}(1690) │ ├─{console-kit-dae}(3494) │ ├─{gdbus}(1693) │ └─{gmain}(1692) ├─cron(1328) ├─dbus-daemon(1365) ├─dhclient(1810) ├─getty(1597) ├─getty(1598) ├─getty(1599) ├─getty(1600) ├─getty(1601) ├─getty(1602) ├─nmbd(1395) ├─ntpd(1809) ├─rsyslogd(1240)─┬─{in:imklog}(1242) │ ├─{in:imuxsock}(1241) │ └─{rs:main Q:Reg}(1244) ├─rtkit-daemon(3434)─┬─{rtkit-daemon}(3435) │ └─{rtkit-daemon}(3436) ├─smbd(1566)───smbd(1607) ├─sshd(1864)─┬─sshd(1876)───bash(1884)───apt-get(3587)───dpkg(3620)───dpkg-deb(3753)─┬─dpkg-deb(3754) │ │ └─dpkg-deb(3755) │ └─sshd(3690)───bash(3698)───pstree(3790) └─udevd(345)
  25. The Cedrus HW encoder is working on A64 (POC). FFmpeg 2.8.6 with cedrus264 can be found for testing here: https://github.com/avafinger/ffmpeg_cedrus264_A64 It was tested on Pine64+ (1GB) and OV5640. Output: VDPAU SUNXI] VE version 0x1689 opened. Output #0, h264, to 'test.h264': Metadata: encoder : Lavf56.40.101 Stream #0:0: Video: h264 (cedrus264), nv12, 1024x768, q=2-31, 200 kb/s, 15 fps, 15 tbn, 15 tbc Metadata: encoder : Lavc56.60.100 cedrus264 Stream mapping: Stream #0:0 -> #0:0 (rawvideo (native) -> h264 (cedrus264)) Press [q] to stop, [?] for help frame= 12 fps=0.0 q=-0.0 size= 89kB time=00:00:00.80 bitrate= 910.4kbits/ frame= 24 fps= 22 q=-0.0 size= 170kB time=00:00:01.60 bitrate= 868.2kbits/ frame= 36 fps= 22 q=-0.0 size= 233kB time=00:00:02.40 bitrate= 796.0kbits/ frame= 48 fps= 22 q=-0.0 size= 309kB time=00:00:03.20 bitrate= 791.3kbits/ frame= 60 fps= 22 q=-0.0 size= 406kB time=00:00:04.00 bitrate= 831.6kbits/ frame= 72 fps= 22 q=-0.0 size= 501kB time=00:00:04.80 bitrate= 855.6kbits/ frame= 84 fps= 22 q=-0.0 size= 583kB time=00:00:05.60 bitrate= 853.4kbits/ frame= 96 fps= 22 q=-0.0 size= 664kB time=00:00:06.40 bitrate= 850.1kbits/ frame= 106 fps= 22 q=-0.0 size= 741kB time=00:00:07.06 bitrate= 858.5kbits/ frame= 114 fps= 21 q=-0.0 size= 806kB time=00:00:07.60 bitrate= 869.3kbits/ frame= 122 fps= 20 q=-0.0 size= 856kB time=00:00:08.13 bitrate= 862.0kbits/ frame= 130 fps= 20 q=-0.0 size= 894kB time=00:00:08.66 bitrate= 845.0kbits/ frame= 138 fps= 20 q=-0.0 size= 931kB time=00:00:09.20 bitrate= 829.1kbits/ frame= 140 fps= 20 q=-0.0 Lsize= 940kB time=00:00:09.33 bitrate= 825.1kbits/s dup=69 drop=0 video:940kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.000000%