[NanoPI M4]

On 2/3/2019 at 9:59 PM, @lex said:

Yes, it does have the same issue.

 

This harmless annoying warning message just halted my NanoPi M4 in a matter of 24 hrs in idle mode. Flooded 5 GB of data and kernel was stalled on next day.

That's why i thought this info could help.

I would not waste time on this issue, make sure you disable wlan completely and watch for the message, it should not appears, clean up your SD card and run domoticz.

If this fix your crash then you should hunt for the fix.

Hi @lex,

 

MANY thanks for the info - much appreciated!

I have been running with wlan disabled and powered-down for a few days now, and so far no warnings/errors *fingers crossed*

So even though it's only warnings and should be harmless it fills logs and halts other important tasks - we will have to see if it is indeed the problem causing Domoticz to crash...

 

I hope somebody commits a fix for this...

 

/M

[NanoPI M4]

On 1/31/2019 at 12:19 PM, @lex said:

Not sure it is related to your Domoticz crash but if i recall correctly the "warning" message is related to Wifi and should be harmless.

There was a patch to fix that and i think the message is due to the missing password or wrong password to connect to wifi.

BUT if you were connected to wifi before the crash you could try running without wifi configured and see what happens.

Hope this helps.

 

Thanks for writing back

I have tried now to disable wifi (I only use 1G eth), to see if that helps...

 

Does anybody know if the Friendlyarm dist. has same issue?

When is that patch included in Armbian build?

 

THANKS!

[NanoPI M4]

On 1/28/2019 at 11:26 AM, mio75 said:

Hi,

 

I have been struggling with a strange problem causing my Domoticz app to crash ever 5-10 days.

I have noted that my dmesg has a lot of these messages:

 

[3672676.299218] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.301072] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.302952] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.303863] bcmsdh_sdmmc: Failed to Read byte F1:@0x1001f=ff, Err: -5
[3672676.305737] bcmsdh_sdmmc: Failed to Read byte F1:@0x1001f=ff, Err: -5
[3672676.307589] bcmsdh_sdmmc: Failed to Read byte F1:@0x1001f=ff, Err: -5
[3672676.310518] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.312353] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.314268] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.315088] bcmsdh_sdmmc: Failed to Read byte F1:@0x1001f=ff, Err: -5
[3672676.316924] bcmsdh_sdmmc: Failed to Read byte F1:@0x1001f=ff, Err: -5
[3672676.318833] bcmsdh_sdmmc: Failed to Read byte F1:@0x1001f=ff, Err: -5
[3672676.319786] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.321644] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.323486] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5

 

I'm booting from an SD card with ARMBIAN 5.65 stable Ubuntu 18.04.1 LTS 4.4.162-rk3399 running off an USB3 SSD.

 

 

I need help to where these errors originate from - I guess it's the SD, right? But is it a driver/kernel issue or a HW issue??

 

Many thanks!

 

/M

 

 

 

I uploaded a "armbianmonitor -u" here: http://ix.io/1zCr

 

Does anybody have an idea what could be wrong?

 

Thanks!

[NanoPI M4]

Hi,

 

I have been struggling with a strange problem causing my Domoticz app to crash ever 5-10 days.

I have noted that my dmesg has a lot of these messages:

 

[3672676.299218] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.301072] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.302952] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.303863] bcmsdh_sdmmc: Failed to Read byte F1:@0x1001f=ff, Err: -5
[3672676.305737] bcmsdh_sdmmc: Failed to Read byte F1:@0x1001f=ff, Err: -5
[3672676.307589] bcmsdh_sdmmc: Failed to Read byte F1:@0x1001f=ff, Err: -5
[3672676.310518] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.312353] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.314268] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.315088] bcmsdh_sdmmc: Failed to Read byte F1:@0x1001f=ff, Err: -5
[3672676.316924] bcmsdh_sdmmc: Failed to Read byte F1:@0x1001f=ff, Err: -5
[3672676.318833] bcmsdh_sdmmc: Failed to Read byte F1:@0x1001f=ff, Err: -5
[3672676.319786] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.321644] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5
[3672676.323486] bcmsdh_sdmmc: Failed to Write byte F1:@0x1001f=00, Err: -5

 

I'm booting from an SD card with ARMBIAN 5.65 stable Ubuntu 18.04.1 LTS 4.4.162-rk3399 running off an USB3 SSD.

 

 

I need help to where these errors originate from - I guess it's the SD, right? But is it a driver/kernel issue or a HW issue??

 

Many thanks!

 

/M

 

 

[NanoPi M4 USB install]

Hi,

 

I would like to run my NanoPi M4 from an external USB3 SSD.

Does anybody know if the images here:

 

http://wiki.friendlyarm.com/wiki/index.php/NanoPi_M4#Work_with_FriendlyCore

 

Will work? Or are they specifically for SD or eMMC?

 

If they won't work, how do I modify to make it work?

 

Many thanks!

M