Andeser
-
Posts
7 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Andeser
-
-
Ok when I do "sudo modprobe ecc." The error is:*
FATAL: Modulo ap6181 not found in directory /lib/modules/4.19.13-sunxi
Inviato dal mio Redmi 4A utilizzando Tapatalk -
Ok what can I do for install the driver of this chip?
Inviato dal mio Redmi 4A utilizzando Tapatalk
-
Ok i'm sorry but i have discouvered that my wifi chip is the ap6181
Inviato dal mio Redmi 4A utilizzando Tapatalk -
2 hours ago, manuti said:
try to follow my steps long time ago ...
Ok, when I do "root@beelinkx2:~# sudo modprobe 8189es" the output is:
Quoteroot@beelinkx2:~# sudo modprobe 8189es firmware_path=/lib/firmware/ap6210/8189es.bin nvram_path=/lib/firmware/ap6210/nvram.txt
modprobe: ERROR: could not insert '8189es': Unknown symbol in module, or unknown parameter (see dmesg)The result of dmesg is:
Quote[ 2212.371047] wifi_platform_bus_enumerate device present 0
[ 2212.371081] ======== Card detection to remove SDIO card! ========
[ 2212.371172] dhd_module_init: Failed to load the driver, try cnt 3
[ 2212.371321] ======== bcm_wlan_set_plat_data ========
[ 2212.371368] bcm_wlan_get_oob_irq enter.
[ 2212.371417] gpio [202] map to virq [10] ok
[ 2212.371447] host_oob_irq: 10
[ 2212.371475] host_oob_irq_flags=0x414
[ 2212.371504] dhd_wifi_platform_load: Enter
[ 2212.371592] Power-up adapter 'DHD generic adapter'
[ 2212.371628] wifi_platform_set_power = 1
[ 2212.371657] ======== PULL WL_REG_ON HIGH! ========
[ 2212.371691] [wifi_pm]: set wl_reg_on 0 !
[ 2212.450354] mmc1: card 0001 removed
[ 2212.450609] [mmc]: sdc1 power_supply is null
[ 2212.575663] [wifi_pm]: set wl_reg_on 1 !
[ 2213.080331] wifi_platform_bus_enumerate device present 1
[ 2213.080384] ======== Card detection to detect SDIO card! ========
[ 2213.082231] [mmc]: sdc1 power_supply is null
[ 2213.140907] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2213.142754] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2213.144588] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2213.147842] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2213.169481] mmc1: new high speed SDIO card at address 0001
[ 2213.188314] bcmsdh_register: register client driver
[ 2213.188743] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2213.189015] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2213.189058] bus num (host idx)=1, slot num (rca)=1
[ 2213.189096] found adapter info 'DHD generic adapter'
[ 2213.189256] sdioh_attach: set sd_f2_blocksize 128
[ 2213.190731] F1 signature read @0x18000000=0x1591a962
[ 2213.191538] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 2213.198285] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 2213.201040] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 2213.203183] dhd_conf_set_chiprev: chip=0xa962, chiprev=1
[ 2213.203467] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
[ 2213.203581] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2213.210676] wl_create_event_handler(): thread:wl_event_handler:17d0 started
[ 2213.211722] tsk Enter, tsk = 0xe6bc1430
[ 2213.212198] dhd_attach(): thread:dhd_watchdog_thread:17d1 started
[ 2213.212563] dhd_attach(): thread:dhd_dpc:17d2 started
[ 2213.212705] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2213.212939] dhd_attach(): thread:dhd_rxf:17d3 started
[ 2213.213005] dhd_deferred_work_init: work queue initialized
[ 2213.214970] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2213.215057] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2213.215112] dhdsdio_download_firmware: set use_rxchain 0
[ 2213.215150] dhdsdio_download_firmware: set txglomsize 16
[ 2213.215191] sdioh_set_mode: set txglom_mode to multi-desc
[ 2213.215226] Final fw_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2213.215264] Final nv_path=/lib/firmware/ap6212/nvram.txt
[ 2213.215299] Final conf_path=/lib/firmware/ap6212/config.txt
[ 2213.225918] dhdsdio_download_code_file: Open firmware file failed /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2213.225989] _dhdsdio_download_firmware: dongle image file download failed
[ 2213.226132] dhd_bus_start: failed to download firmware /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2213.226183] dhdsdio_probe: dhd_bus_start failed
[ 2213.226224] bcmsdh_oob_intr_unregister: Enter
[ 2213.226257] bcmsdh_oob_intr_unregister: irq is not registered
[ 2213.226299] dhd_wlfc_deinit():3301, Already disabled!
[ 2213.300185] dhd_detach(): thread:dhd_watchdog_thread:17d1 terminated OK
[ 2213.300226] dhd_detach(): thread:dhd_rxf:17d3 terminated OK
[ 2213.300270] dhd_dpc_thread: Unexpected up_cnt 0
[ 2213.300323] dhd_detach(): thread:dhd_dpc:17d2 terminated OK
[ 2213.300632] wl_event_handler: was terminated
[ 2213.300742] wl_destroy_event_handler(): thread:wl_event_handler:17d0 terminated OK
[ 2213.390492] dhd_os_prealloc: failed to alloc memory, section: 7, size: 0bytes
[ 2213.390514] bcmsdh_probe: device attach failed
[ 2213.390524] sdioh_probe: bcmsdh_probe failed
[ 2213.390683] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error -12
[ 2225.390203] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[ 2225.390587] wifi_platform_set_power = 0
[ 2225.390624] ======== PULL WL_REG_ON LOW! ========
[ 2225.390661] wifi_platform_bus_enumerate device present 0
[ 2225.390697] ======== Card detection to remove SDIO card! ========
[ 2225.390849] unregister wifi platform drivers
[ 2225.390890] wifi_platform_bus_enumerate device present 0
[ 2225.390923] ======== Card detection to remove SDIO card! ========
[ 2225.391003] dhd_module_init: Failed to load the driver, try cnt 2
[ 2225.391152] ======== bcm_wlan_set_plat_data ========
[ 2225.391199] bcm_wlan_get_oob_irq enter.
[ 2225.391247] gpio [202] map to virq [10] ok
[ 2225.391278] host_oob_irq: 10
[ 2225.391305] host_oob_irq_flags=0x414
[ 2225.391334] dhd_wifi_platform_load: Enter
[ 2225.391416] Power-up adapter 'DHD generic adapter'
[ 2225.391451] wifi_platform_set_power = 1
[ 2225.391480] ======== PULL WL_REG_ON HIGH! ========
[ 2225.391515] [wifi_pm]: set wl_reg_on 0 !
[ 2225.460308] mmc1: card 0001 removed
[ 2225.460563] [mmc]: sdc1 power_supply is null
[ 2225.591601] [wifi_pm]: set wl_reg_on 1 !
[ 2226.100264] wifi_platform_bus_enumerate device present 1
[ 2226.100316] ======== Card detection to detect SDIO card! ========
[ 2226.102102] [mmc]: sdc1 power_supply is null
[ 2226.160583] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2226.162428] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2226.164270] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2226.167609] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2226.197041] mmc1: new high speed SDIO card at address 0001
[ 2226.215701] bcmsdh_register: register client driver
[ 2226.216123] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2226.216390] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2226.216433] bus num (host idx)=1, slot num (rca)=1
[ 2226.216470] found adapter info 'DHD generic adapter'
[ 2226.216644] sdioh_attach: set sd_f2_blocksize 128
[ 2226.217950] F1 signature read @0x18000000=0x1591a962
[ 2226.218520] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 2226.225415] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 2226.227891] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 2226.230020] dhd_conf_set_chiprev: chip=0xa962, chiprev=1
[ 2226.230434] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
[ 2226.230554] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2226.244305] tsk Enter, tsk = 0xe6bc1430
[ 2226.244395] wl_create_event_handler(): thread:wl_event_handler:17d5 started
[ 2226.252761] dhd_attach(): thread:dhd_watchdog_thread:17d7 started
[ 2226.253861] dhd_attach(): thread:dhd_dpc:17d8 started
[ 2226.254042] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2226.254472] dhd_attach(): thread:dhd_rxf:17d9 started
[ 2226.254553] dhd_deferred_work_init: work queue initialized
[ 2226.255577] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2226.255660] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2226.255714] dhdsdio_download_firmware: set use_rxchain 0
[ 2226.255752] dhdsdio_download_firmware: set txglomsize 16
[ 2226.255792] sdioh_set_mode: set txglom_mode to multi-desc
[ 2226.255827] Final fw_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2226.255864] Final nv_path=/lib/firmware/ap6212/nvram.txt
[ 2226.255899] Final conf_path=/lib/firmware/ap6212/config.txt
[ 2226.257777] dhdsdio_download_code_file: Open firmware file failed /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2226.257848] _dhdsdio_download_firmware: dongle image file download failed
[ 2226.263210] dhd_bus_start: failed to download firmware /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2226.263280] dhdsdio_probe: dhd_bus_start failed
[ 2226.263320] bcmsdh_oob_intr_unregister: Enter
[ 2226.263352] bcmsdh_oob_intr_unregister: irq is not registered
[ 2226.263396] dhd_wlfc_deinit():3301, Already disabled!
[ 2226.340169] dhd_detach(): thread:dhd_watchdog_thread:17d7 terminated OK
[ 2226.340201] dhd_detach(): thread:dhd_rxf:17d9 terminated OK
[ 2226.340222] dhd_dpc_thread: Unexpected up_cnt 0
[ 2226.340292] dhd_detach(): thread:dhd_dpc:17d8 terminated OK
[ 2226.340582] wl_event_handler: was terminated
[ 2226.340662] wl_destroy_event_handler(): thread:wl_event_handler:17d5 terminated OK
[ 2226.420510] dhd_os_prealloc: failed to alloc memory, section: 7, size: 0bytes
[ 2226.420532] bcmsdh_probe: device attach failed
[ 2226.420542] sdioh_probe: bcmsdh_probe failed
[ 2226.420708] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error -12
[ 2238.420095] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[ 2238.420243] wifi_platform_set_power = 0
[ 2238.420253] ======== PULL WL_REG_ON LOW! ========
[ 2238.420262] wifi_platform_bus_enumerate device present 0
[ 2238.420271] ======== Card detection to remove SDIO card! ========
[ 2238.420330] unregister wifi platform drivers
[ 2238.420340] wifi_platform_bus_enumerate device present 0
[ 2238.420348] ======== Card detection to remove SDIO card! ========
[ 2238.420373] dhd_module_init: Failed to load the driver, try cnt 1
[ 2238.420410] ======== bcm_wlan_set_plat_data ========
[ 2238.420424] bcm_wlan_get_oob_irq enter.
[ 2238.420438] gpio [202] map to virq [10] ok
[ 2238.420446] host_oob_irq: 10
[ 2238.420452] host_oob_irq_flags=0x414
[ 2238.420459] dhd_wifi_platform_load: Enter
[ 2238.420489] Power-up adapter 'DHD generic adapter'
[ 2238.420498] wifi_platform_set_power = 1
[ 2238.420505] ======== PULL WL_REG_ON HIGH! ========
[ 2238.420514] [wifi_pm]: set wl_reg_on 0 !
[ 2238.540258] mmc1: card 0001 removed
[ 2238.540490] [mmc]: sdc1 power_supply is null
[ 2238.620541] [wifi_pm]: set wl_reg_on 1 !
[ 2239.130099] wifi_platform_bus_enumerate device present 1
[ 2239.130117] ======== Card detection to detect SDIO card! ========
[ 2239.131727] [mmc]: sdc1 power_supply is null
[ 2239.187331] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2239.188878] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2239.190441] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2239.193203] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2239.213395] mmc1: new high speed SDIO card at address 0001
[ 2239.232013] bcmsdh_register: register client driver
[ 2239.232495] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2239.232845] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2239.232892] bus num (host idx)=1, slot num (rca)=1
[ 2239.232929] found adapter info 'DHD generic adapter'
[ 2239.233113] sdioh_attach: set sd_f2_blocksize 128
[ 2239.234353] F1 signature read @0x18000000=0x1591a962
[ 2239.234925] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 2239.242714] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 2239.245100] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 2239.247291] dhd_conf_set_chiprev: chip=0xa962, chiprev=1
[ 2239.247577] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
[ 2239.247684] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2239.260851] wl_create_event_handler(): thread:wl_event_handler:17da started
[ 2239.260902] tsk Enter, tsk = 0xe6bc1430
[ 2239.262376] dhd_attach(): thread:dhd_watchdog_thread:17dc started
[ 2239.262776] dhd_attach(): thread:dhd_dpc:17dd started
[ 2239.262856] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2239.263156] dhd_attach(): thread:dhd_rxf:17de started
[ 2239.263235] dhd_deferred_work_init: work queue initialized
[ 2239.267005] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2239.267094] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2239.267148] dhdsdio_download_firmware: set use_rxchain 0
[ 2239.267186] dhdsdio_download_firmware: set txglomsize 16
[ 2239.267226] sdioh_set_mode: set txglom_mode to multi-desc
[ 2239.267261] Final fw_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2239.267299] Final nv_path=/lib/firmware/ap6212/nvram.txt
[ 2239.267333] Final conf_path=/lib/firmware/ap6212/config.txt
[ 2239.269444] dhdsdio_download_code_file: Open firmware file failed /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2239.269528] _dhdsdio_download_firmware: dongle image file download failed
[ 2239.269693] dhd_bus_start: failed to download firmware /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2239.269748] dhdsdio_probe: dhd_bus_start failed
[ 2239.269788] bcmsdh_oob_intr_unregister: Enter
[ 2239.269821] bcmsdh_oob_intr_unregister: irq is not registered
[ 2239.269880] dhd_wlfc_deinit():3301, Already disabled!
[ 2239.312523] dhd_detach(): thread:dhd_watchdog_thread:17dc terminated OK
[ 2239.312557] dhd_detach(): thread:dhd_rxf:17de terminated OK
[ 2239.312599] dhd_dpc_thread: Unexpected up_cnt 0
[ 2239.312634] dhd_detach(): thread:dhd_dpc:17dd terminated OK
[ 2239.312957] wl_event_handler: was terminated
[ 2239.313055] wl_destroy_event_handler(): thread:wl_event_handler:17da terminated OK
[ 2239.360485] dhd_os_prealloc: failed to alloc memory, section: 7, size: 0bytes
[ 2239.360512] bcmsdh_probe: device attach failed
[ 2239.360523] sdioh_probe: bcmsdh_probe failed
[ 2239.360679] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error -12
[ 2251.360189] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[ 2251.360575] wifi_platform_set_power = 0
[ 2251.360613] ======== PULL WL_REG_ON LOW! ========
[ 2251.360650] wifi_platform_bus_enumerate device present 0
[ 2251.360685] ======== Card detection to remove SDIO card! ========
[ 2251.360850] unregister wifi platform drivers
[ 2251.360891] wifi_platform_bus_enumerate device present 0
[ 2251.360925] ======== Card detection to remove SDIO card! ========
[ 2251.361031] dhd_module_init: Failed to load the driver, try cnt 0
[ 2251.361176] dhd_module_init: Failed to load driver max retry reached**
[ 2251.361216] dhd_module_init: Exit err=-62
[ 2251.431031] mmc1: card 0001 removed
[ 2251.431959] [mmc]: sdc1 power_supply is null
[ 2251.461667] dhd_module_init: in
[ 2251.461686] ======== bcm_wlan_set_plat_data ========
[ 2251.461702] bcm_wlan_get_oob_irq enter.
[ 2251.461718] gpio [202] map to virq [10] ok
[ 2251.461725] host_oob_irq: 10
[ 2251.461732] host_oob_irq_flags=0x414
[ 2251.461739] dhd_wifi_platform_load: Enter
[ 2251.461778] Power-up adapter 'DHD generic adapter'
[ 2251.461787] wifi_platform_set_power = 1
[ 2251.461795] ======== PULL WL_REG_ON HIGH! ========
[ 2251.461804] [wifi_pm]: set wl_reg_on 0 !
[ 2251.661838] [wifi_pm]: set wl_reg_on 1 !
[ 2252.170122] wifi_platform_bus_enumerate device present 1
[ 2252.170140] ======== Card detection to detect SDIO card! ========
[ 2252.171733] [mmc]: sdc1 power_supply is null
[ 2252.228311] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2252.230317] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2252.232199] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2252.235457] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2252.257178] mmc1: new high speed SDIO card at address 0001
[ 2252.275821] bcmsdh_register: register client driver
[ 2252.276256] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2252.276532] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2252.276575] bus num (host idx)=1, slot num (rca)=1
[ 2252.276612] found adapter info 'DHD generic adapter'
[ 2252.276775] sdioh_attach: set sd_f2_blocksize 128
[ 2252.277963] F1 signature read @0x18000000=0x1591a962
[ 2252.278540] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 2252.285504] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 2252.287974] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 2252.290281] dhd_conf_set_chiprev: chip=0xa962, chiprev=1
[ 2252.290566] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
[ 2252.290679] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2252.301595] tsk Enter, tsk = 0xe6041430
[ 2252.301684] wl_create_event_handler(): thread:wl_event_handler:17f3 started
[ 2252.307433] dhd_attach(): thread:dhd_watchdog_thread:17f5 started
[ 2252.308738] dhd_attach(): thread:dhd_dpc:17f6 started
[ 2252.309261] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2252.309607] dhd_attach(): thread:dhd_rxf:17f7 started
[ 2252.309677] dhd_deferred_work_init: work queue initialized
[ 2252.314871] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2252.314960] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2252.315012] dhdsdio_download_firmware: set use_rxchain 0
[ 2252.315050] dhdsdio_download_firmware: set txglomsize 16
[ 2252.315088] sdioh_set_mode: set txglom_mode to multi-desc
[ 2252.315123] Final fw_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2252.315160] Final nv_path=/lib/firmware/ap6212/nvram.txt
[ 2252.315195] Final conf_path=/lib/firmware/ap6212/config.txt
[ 2252.316876] dhdsdio_download_code_file: Open firmware file failed /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2252.316935] _dhdsdio_download_firmware: dongle image file download failed
[ 2252.317068] dhd_bus_start: failed to download firmware /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2252.317118] dhdsdio_probe: dhd_bus_start failed
[ 2252.317157] bcmsdh_oob_intr_unregister: Enter
[ 2252.317189] bcmsdh_oob_intr_unregister: irq is not registered
[ 2252.317232] dhd_wlfc_deinit():3301, Already disabled!
[ 2252.363446] dhd_detach(): thread:dhd_watchdog_thread:17f5 terminated OK
[ 2252.363496] dhd_detach(): thread:dhd_rxf:17f7 terminated OK
[ 2252.363547] dhd_dpc_thread: Unexpected up_cnt 0
[ 2252.363631] dhd_detach(): thread:dhd_dpc:17f6 terminated OK
[ 2252.363931] wl_event_handler: was terminated
[ 2252.364343] wl_destroy_event_handler(): thread:wl_event_handler:17f3 terminated OK
[ 2252.432788] dhd_os_prealloc: failed to alloc memory, section: 7, size: 0bytes
[ 2252.432819] bcmsdh_probe: device attach failed
[ 2252.432830] sdioh_probe: bcmsdh_probe failed
[ 2252.433258] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error -12
[ 2264.430084] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[ 2264.430234] wifi_platform_set_power = 0
[ 2264.430244] ======== PULL WL_REG_ON LOW! ========
[ 2264.430254] wifi_platform_bus_enumerate device present 0
[ 2264.430262] ======== Card detection to remove SDIO card! ========
[ 2264.430323] unregister wifi platform drivers
[ 2264.430333] wifi_platform_bus_enumerate device present 0
[ 2264.430341] ======== Card detection to remove SDIO card! ========
[ 2264.430367] dhd_module_init: Failed to load the driver, try cnt 3
[ 2264.430404] ======== bcm_wlan_set_plat_data ========
[ 2264.430419] bcm_wlan_get_oob_irq enter.
[ 2264.430434] gpio [202] map to virq [10] ok
[ 2264.430441] host_oob_irq: 10
[ 2264.430447] host_oob_irq_flags=0x414
[ 2264.430455] dhd_wifi_platform_load: Enter
[ 2264.430484] Power-up adapter 'DHD generic adapter'
[ 2264.430494] wifi_platform_set_power = 1
[ 2264.430501] ======== PULL WL_REG_ON HIGH! ========
[ 2264.430510] [wifi_pm]: set wl_reg_on 0 !
[ 2264.490307] mmc1: card 0001 removed
[ 2264.490564] [mmc]: sdc1 power_supply is null
[ 2264.630537] [wifi_pm]: set wl_reg_on 1 !
[ 2265.140082] wifi_platform_bus_enumerate device present 1
[ 2265.140097] ======== Card detection to detect SDIO card! ========
[ 2265.141790] [mmc]: sdc1 power_supply is null
[ 2265.200252] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2265.202095] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2265.203931] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2265.207185] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2265.229320] mmc1: new high speed SDIO card at address 0001
[ 2265.248067] bcmsdh_register: register client driver
[ 2265.248476] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2265.248748] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2265.248791] bus num (host idx)=1, slot num (rca)=1
[ 2265.248828] found adapter info 'DHD generic adapter'
[ 2265.248997] sdioh_attach: set sd_f2_blocksize 128
[ 2265.250398] F1 signature read @0x18000000=0x1591a962
[ 2265.251088] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 2265.257748] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 2265.260399] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 2265.262587] dhd_conf_set_chiprev: chip=0xa962, chiprev=1
[ 2265.262872] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
[ 2265.262981] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2265.266783] tsk Enter, tsk = 0xe6041430
[ 2265.266874] wl_create_event_handler(): thread:wl_event_handler:1804 started
[ 2265.276756] dhd_attach(): thread:dhd_watchdog_thread:1805 started
[ 2265.279216] dhd_attach(): thread:dhd_dpc:1806 started
[ 2265.279307] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2265.279689] dhd_attach(): thread:dhd_rxf:1807 started
[ 2265.279794] dhd_deferred_work_init: work queue initialized
[ 2265.283913] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2265.283997] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2265.284051] dhdsdio_download_firmware: set use_rxchain 0
[ 2265.284088] dhdsdio_download_firmware: set txglomsize 16
[ 2265.284127] sdioh_set_mode: set txglom_mode to multi-desc
[ 2265.284163] Final fw_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2265.284200] Final nv_path=/lib/firmware/ap6212/nvram.txt
[ 2265.284235] Final conf_path=/lib/firmware/ap6212/config.txt
[ 2265.286894] dhdsdio_download_code_file: Open firmware file failed /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2265.286958] _dhdsdio_download_firmware: dongle image file download failed
[ 2265.287201] dhd_bus_start: failed to download firmware /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2265.287265] dhdsdio_probe: dhd_bus_start failed
[ 2265.287320] bcmsdh_oob_intr_unregister: Enter
[ 2265.287360] bcmsdh_oob_intr_unregister: irq is not registered
[ 2265.287423] dhd_wlfc_deinit():3301, Already disabled!
[ 2265.330186] dhd_detach(): thread:dhd_watchdog_thread:1805 terminated OK
[ 2265.330218] dhd_detach(): thread:dhd_rxf:1807 terminated OK
[ 2265.330258] dhd_dpc_thread: Unexpected up_cnt 0
[ 2265.330302] dhd_detach(): thread:dhd_dpc:1806 terminated OK
[ 2265.330622] wl_event_handler: was terminated
[ 2265.330716] wl_destroy_event_handler(): thread:wl_event_handler:1804 terminated OK
[ 2265.391482] dhd_os_prealloc: failed to alloc memory, section: 7, size: 0bytes
[ 2265.391505] bcmsdh_probe: device attach failed
[ 2265.391516] sdioh_probe: bcmsdh_probe failed
[ 2265.391668] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error -12
[ 2277.390100] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[ 2277.390257] wifi_platform_set_power = 0
[ 2277.390267] ======== PULL WL_REG_ON LOW! ========
[ 2277.390276] wifi_platform_bus_enumerate device present 0
[ 2277.390284] ======== Card detection to remove SDIO card! ========
[ 2277.390347] unregister wifi platform drivers
[ 2277.390359] wifi_platform_bus_enumerate device present 0
[ 2277.390367] ======== Card detection to remove SDIO card! ========
[ 2277.390393] dhd_module_init: Failed to load the driver, try cnt 2
[ 2277.390431] ======== bcm_wlan_set_plat_data ========
[ 2277.390446] bcm_wlan_get_oob_irq enter.
[ 2277.390459] gpio [202] map to virq [10] ok
[ 2277.390467] host_oob_irq: 10
[ 2277.390473] host_oob_irq_flags=0x414
[ 2277.390480] dhd_wifi_platform_load: Enter
[ 2277.390511] Power-up adapter 'DHD generic adapter'
[ 2277.390521] wifi_platform_set_power = 1
[ 2277.390529] ======== PULL WL_REG_ON HIGH! ========
[ 2277.390538] [wifi_pm]: set wl_reg_on 0 !
[ 2277.430274] mmc1: card 0001 removed
[ 2277.430530] [mmc]: sdc1 power_supply is null
[ 2277.590566] [wifi_pm]: set wl_reg_on 1 !
[ 2278.100088] wifi_platform_bus_enumerate device present 1
[ 2278.100105] ======== Card detection to detect SDIO card! ========
[ 2278.101728] [mmc]: sdc1 power_supply is null
[ 2278.158669] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2278.160741] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2278.162655] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2278.165912] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2278.188133] mmc1: new high speed SDIO card at address 0001
[ 2278.206933] bcmsdh_register: register client driver
[ 2278.207370] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2278.207643] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2278.207689] bus num (host idx)=1, slot num (rca)=1
[ 2278.207726] found adapter info 'DHD generic adapter'
[ 2278.207903] sdioh_attach: set sd_f2_blocksize 128
[ 2278.209227] F1 signature read @0x18000000=0x1591a962
[ 2278.209819] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 2278.216743] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 2278.219216] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 2278.221647] dhd_conf_set_chiprev: chip=0xa962, chiprev=1
[ 2278.221937] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
[ 2278.222048] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2278.233488] wl_create_event_handler(): thread:wl_event_handler:1809 started
[ 2278.233583] tsk Enter, tsk = 0xe6041430
[ 2278.237973] dhd_attach(): thread:dhd_watchdog_thread:180b started
[ 2278.238377] dhd_attach(): thread:dhd_dpc:180c started
[ 2278.238457] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2278.238683] dhd_attach(): thread:dhd_rxf:180d started
[ 2278.238752] dhd_deferred_work_init: work queue initialized
[ 2278.240477] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2278.240557] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2278.240612] dhdsdio_download_firmware: set use_rxchain 0
[ 2278.240653] dhdsdio_download_firmware: set txglomsize 16
[ 2278.240694] sdioh_set_mode: set txglom_mode to multi-desc
[ 2278.240733] Final fw_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2278.240774] Final nv_path=/lib/firmware/ap6212/nvram.txt
[ 2278.240811] Final conf_path=/lib/firmware/ap6212/config.txt
[ 2278.245172] dhdsdio_download_code_file: Open firmware file failed /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2278.245241] _dhdsdio_download_firmware: dongle image file download failed
[ 2278.245420] dhd_bus_start: failed to download firmware /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2278.245469] dhdsdio_probe: dhd_bus_start failed
[ 2278.245509] bcmsdh_oob_intr_unregister: Enter
[ 2278.245542] bcmsdh_oob_intr_unregister: irq is not registered
[ 2278.245585] dhd_wlfc_deinit():3301, Already disabled!
[ 2278.310203] dhd_detach(): thread:dhd_watchdog_thread:180b terminated OK
[ 2278.310236] dhd_detach(): thread:dhd_rxf:180d terminated OK
[ 2278.310277] dhd_dpc_thread: Unexpected up_cnt 0
[ 2278.310307] dhd_detach(): thread:dhd_dpc:180c terminated OK
[ 2278.310588] wl_event_handler: was terminated
[ 2278.310642] wl_destroy_event_handler(): thread:wl_event_handler:1809 terminated OK
[ 2278.360548] dhd_os_prealloc: failed to alloc memory, section: 7, size: 0bytes
[ 2278.360571] bcmsdh_probe: device attach failed
[ 2278.360581] sdioh_probe: bcmsdh_probe failed
[ 2278.360712] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error -12
[ 2290.360358] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[ 2290.360788] wifi_platform_set_power = 0
[ 2290.360826] ======== PULL WL_REG_ON LOW! ========
[ 2290.360863] wifi_platform_bus_enumerate device present 0
[ 2290.360898] ======== Card detection to remove SDIO card! ========
[ 2290.361063] unregister wifi platform drivers
[ 2290.361104] wifi_platform_bus_enumerate device present 0
[ 2290.361137] ======== Card detection to remove SDIO card! ========
[ 2290.361226] dhd_module_init: Failed to load the driver, try cnt 1
[ 2290.361376] ======== bcm_wlan_set_plat_data ========
[ 2290.361424] bcm_wlan_get_oob_irq enter.
[ 2290.361471] gpio [202] map to virq [10] ok
[ 2290.361501] host_oob_irq: 10
[ 2290.361529] host_oob_irq_flags=0x414
[ 2290.361559] dhd_wifi_platform_load: Enter
[ 2290.361646] Power-up adapter 'DHD generic adapter'
[ 2290.361683] wifi_platform_set_power = 1
[ 2290.361712] ======== PULL WL_REG_ON HIGH! ========
[ 2290.361747] [wifi_pm]: set wl_reg_on 0 !
[ 2290.403442] mmc1: card 0001 removed
[ 2290.403715] [mmc]: sdc1 power_supply is null
[ 2290.562545] [wifi_pm]: set wl_reg_on 1 !
[ 2291.070115] wifi_platform_bus_enumerate device present 1
[ 2291.070132] ======== Card detection to detect SDIO card! ========
[ 2291.071781] [mmc]: sdc1 power_supply is null
[ 2291.128160] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2291.129863] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2291.131631] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2291.135523] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2291.153293] mmc1: new high speed SDIO card at address 0001
[ 2291.170205] bcmsdh_register: register client driver
[ 2291.170413] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2291.170539] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2291.170550] bus num (host idx)=1, slot num (rca)=1
[ 2291.170560] found adapter info 'DHD generic adapter'
[ 2291.170658] sdioh_attach: set sd_f2_blocksize 128
[ 2291.171164] F1 signature read @0x18000000=0x1591a962
[ 2291.171448] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 2291.174366] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 2291.175958] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 2291.176973] dhd_conf_set_chiprev: chip=0xa962, chiprev=1
[ 2291.177051] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
[ 2291.177096] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2291.179846] wl_create_event_handler(): thread:wl_event_handler:180e started
[ 2291.179862] tsk Enter, tsk = 0xe6041430
[ 2291.184079] dhd_attach(): thread:dhd_watchdog_thread:1810 started
[ 2291.184197] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2291.184240] dhd_attach(): thread:dhd_dpc:1811 started
[ 2291.184384] dhd_attach(): thread:dhd_rxf:1812 started
[ 2291.184412] dhd_deferred_work_init: work queue initialized
[ 2291.184815] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2291.184846] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2291.184865] dhdsdio_download_firmware: set use_rxchain 0
[ 2291.184874] dhdsdio_download_firmware: set txglomsize 16
[ 2291.184889] sdioh_set_mode: set txglom_mode to multi-desc
[ 2291.184899] Final fw_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2291.184908] Final nv_path=/lib/firmware/ap6212/nvram.txt
[ 2291.184917] Final conf_path=/lib/firmware/ap6212/config.txt
[ 2291.185886] dhdsdio_download_code_file: Open firmware file failed /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2291.185911] _dhdsdio_download_firmware: dongle image file download failed
[ 2291.185975] dhd_bus_start: failed to download firmware /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2291.185988] dhdsdio_probe: dhd_bus_start failed
[ 2291.186001] bcmsdh_oob_intr_unregister: Enter
[ 2291.186009] bcmsdh_oob_intr_unregister: irq is not registered
[ 2291.186021] dhd_wlfc_deinit():3301, Already disabled!
[ 2291.230200] dhd_detach(): thread:dhd_watchdog_thread:1810 terminated OK
[ 2291.230229] dhd_detach(): thread:dhd_rxf:1812 terminated OK
[ 2291.230249] dhd_dpc_thread: Unexpected up_cnt 0
[ 2291.230298] dhd_detach(): thread:dhd_dpc:1811 terminated OK
[ 2291.230568] wl_event_handler: was terminated
[ 2291.230644] wl_destroy_event_handler(): thread:wl_event_handler:180e terminated OK
[ 2291.270497] dhd_os_prealloc: failed to alloc memory, section: 7, size: 0bytes
[ 2291.270518] bcmsdh_probe: device attach failed
[ 2291.270529] sdioh_probe: bcmsdh_probe failed
[ 2291.270687] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error -12
[ 2303.270107] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[ 2303.270267] wifi_platform_set_power = 0
[ 2303.270276] ======== PULL WL_REG_ON LOW! ========
[ 2303.270284] wifi_platform_bus_enumerate device present 0
[ 2303.270292] ======== Card detection to remove SDIO card! ========
[ 2303.270354] unregister wifi platform drivers
[ 2303.270364] wifi_platform_bus_enumerate device present 0
[ 2303.270371] ======== Card detection to remove SDIO card! ========
[ 2303.270396] dhd_module_init: Failed to load the driver, try cnt 0
[ 2303.270427] dhd_module_init: Failed to load driver max retry reached**
[ 2303.270436] dhd_module_init: Exit err=-62
[ 2303.370270] mmc1: card 0001 removed
[ 2303.370501] [mmc]: sdc1 power_supply is null
[ 2303.386580] dhd_module_init: in
[ 2303.386597] ======== bcm_wlan_set_plat_data ========
[ 2303.386612] bcm_wlan_get_oob_irq enter.
[ 2303.386625] gpio [202] map to virq [10] ok
[ 2303.386631] host_oob_irq: 10
[ 2303.386637] host_oob_irq_flags=0x414
[ 2303.386643] dhd_wifi_platform_load: Enter
[ 2303.386675] Power-up adapter 'DHD generic adapter'
[ 2303.386683] wifi_platform_set_power = 1
[ 2303.386689] ======== PULL WL_REG_ON HIGH! ========
[ 2303.386696] [wifi_pm]: set wl_reg_on 0 !
[ 2303.586964] [wifi_pm]: set wl_reg_on 1 !
[ 2304.090089] wifi_platform_bus_enumerate device present 1
[ 2304.090108] ======== Card detection to detect SDIO card! ========
[ 2304.091729] [mmc]: sdc1 power_supply is null
[ 2304.154895] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2304.156537] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2304.158182] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2304.162834] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2304.181276] mmc1: new high speed SDIO card at address 0001
[ 2304.198270] bcmsdh_register: register client driver
[ 2304.199744] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2304.199917] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2304.199930] bus num (host idx)=1, slot num (rca)=1
[ 2304.199941] found adapter info 'DHD generic adapter'
[ 2304.200642] sdioh_attach: set sd_f2_blocksize 128
[ 2304.201193] F1 signature read @0x18000000=0x1591a962
[ 2304.201499] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 2304.204216] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 2304.205179] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 2304.206357] dhd_conf_set_chiprev: chip=0xa962, chiprev=1
[ 2304.206437] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
[ 2304.206486] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2304.213001] wl_create_event_handler(): thread:wl_event_handler:1816 started
[ 2304.213018] tsk Enter, tsk = 0xe6041430
[ 2304.214210] dhd_attach(): thread:dhd_watchdog_thread:1817 started
[ 2304.214348] dhd_attach(): thread:dhd_dpc:1818 started
[ 2304.214509] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2304.214519] dhd_attach(): thread:dhd_rxf:1819 started
[ 2304.214540] dhd_deferred_work_init: work queue initialized
[ 2304.214954] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2304.214981] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2304.214996] dhdsdio_download_firmware: set use_rxchain 0
[ 2304.215005] dhdsdio_download_firmware: set txglomsize 16
[ 2304.215015] sdioh_set_mode: set txglom_mode to multi-desc
[ 2304.215023] Final fw_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2304.215032] Final nv_path=/lib/firmware/ap6212/nvram.txt
[ 2304.215040] Final conf_path=/lib/firmware/ap6212/config.txt
[ 2304.230751] dhdsdio_download_code_file: Open firmware file failed /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2304.230772] _dhdsdio_download_firmware: dongle image file download failed
[ 2304.230822] dhd_bus_start: failed to download firmware /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2304.230833] dhdsdio_probe: dhd_bus_start failed
[ 2304.230844] bcmsdh_oob_intr_unregister: Enter
[ 2304.230851] bcmsdh_oob_intr_unregister: irq is not registered
[ 2304.230862] dhd_wlfc_deinit():3301, Already disabled!
[ 2304.320133] dhd_detach(): thread:dhd_watchdog_thread:1817 terminated OK
[ 2304.320162] dhd_detach(): thread:dhd_rxf:1819 terminated OK
[ 2304.320225] dhd_dpc_thread: Unexpected up_cnt 0
[ 2304.320249] dhd_detach(): thread:dhd_dpc:1818 terminated OK
[ 2304.320538] wl_event_handler: was terminated
[ 2304.320614] wl_destroy_event_handler(): thread:wl_event_handler:1816 terminated OK
[ 2304.410426] dhd_os_prealloc: failed to alloc memory, section: 7, size: 0bytes
[ 2304.410446] bcmsdh_probe: device attach failed
[ 2304.410455] sdioh_probe: bcmsdh_probe failed
[ 2304.410592] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error -12
[ 2316.410091] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[ 2316.410258] wifi_platform_set_power = 0
[ 2316.410271] ======== PULL WL_REG_ON LOW! ========
[ 2316.410280] wifi_platform_bus_enumerate device present 0
[ 2316.410289] ======== Card detection to remove SDIO card! ========
[ 2316.410367] unregister wifi platform drivers
[ 2316.410378] wifi_platform_bus_enumerate device present 0
[ 2316.410387] ======== Card detection to remove SDIO card! ========
[ 2316.410411] dhd_module_init: Failed to load the driver, try cnt 3
[ 2316.410448] ======== bcm_wlan_set_plat_data ========
[ 2316.410464] bcm_wlan_get_oob_irq enter.
[ 2316.410478] gpio [202] map to virq [10] ok
[ 2316.410485] host_oob_irq: 10
[ 2316.410492] host_oob_irq_flags=0x414
[ 2316.410499] dhd_wifi_platform_load: Enter
[ 2316.410529] Power-up adapter 'DHD generic adapter'
[ 2316.410538] wifi_platform_set_power = 1
[ 2316.410545] ======== PULL WL_REG_ON HIGH! ========
[ 2316.410554] [wifi_pm]: set wl_reg_on 0 !
[ 2316.520366] mmc1: card 0001 removed
[ 2316.520630] [mmc]: sdc1 power_supply is null
[ 2316.610676] [wifi_pm]: set wl_reg_on 1 !
[ 2317.120102] wifi_platform_bus_enumerate device present 1
[ 2317.120120] ======== Card detection to detect SDIO card! ========
[ 2317.121720] [mmc]: sdc1 power_supply is null
[ 2317.178747] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2317.180444] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2317.182132] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2317.185074] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2317.202336] mmc1: new high speed SDIO card at address 0001
[ 2317.219412] bcmsdh_register: register client driver
[ 2317.219589] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2317.219705] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2317.219717] bus num (host idx)=1, slot num (rca)=1
[ 2317.219728] found adapter info 'DHD generic adapter'
[ 2317.219814] sdioh_attach: set sd_f2_blocksize 128
[ 2317.220519] F1 signature read @0x18000000=0x1591a962
[ 2317.220869] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 2317.231404] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 2317.232811] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 2317.234164] dhd_conf_set_chiprev: chip=0xa962, chiprev=1
[ 2317.234253] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
[ 2317.234318] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2317.235893] wl_create_event_handler(): thread:wl_event_handler:181a started
[ 2317.236435] tsk Enter, tsk = 0xe4a81430
[ 2317.236609] dhd_attach(): thread:dhd_watchdog_thread:181b started
[ 2317.236729] dhd_attach(): thread:dhd_dpc:181c started
[ 2317.236768] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2317.236830] dhd_attach(): thread:dhd_rxf:181d started
[ 2317.236852] dhd_deferred_work_init: work queue initialized
[ 2317.237288] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2317.237315] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2317.237329] dhdsdio_download_firmware: set use_rxchain 0
[ 2317.237338] dhdsdio_download_firmware: set txglomsize 16
[ 2317.237349] sdioh_set_mode: set txglom_mode to multi-desc
[ 2317.237357] Final fw_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2317.237366] Final nv_path=/lib/firmware/ap6212/nvram.txt
[ 2317.237375] Final conf_path=/lib/firmware/ap6212/config.txt
[ 2317.240615] dhdsdio_download_code_file: Open firmware file failed /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2317.240637] _dhdsdio_download_firmware: dongle image file download failed
[ 2317.240878] dhd_bus_start: failed to download firmware /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2317.240897] dhdsdio_probe: dhd_bus_start failed
[ 2317.240908] bcmsdh_oob_intr_unregister: Enter
[ 2317.240917] bcmsdh_oob_intr_unregister: irq is not registered
[ 2317.240929] dhd_wlfc_deinit():3301, Already disabled!
[ 2317.330293] dhd_detach(): thread:dhd_watchdog_thread:181b terminated OK
[ 2317.330387] dhd_detach(): thread:dhd_rxf:181d terminated OK
[ 2317.330411] dhd_dpc_thread: Unexpected up_cnt 0
[ 2317.330461] dhd_detach(): thread:dhd_dpc:181c terminated OK
[ 2317.330802] wl_event_handler: was terminated
[ 2317.330914] wl_destroy_event_handler(): thread:wl_event_handler:181a terminated OK
[ 2317.370468] dhd_os_prealloc: failed to alloc memory, section: 7, size: 0bytes
[ 2317.370490] bcmsdh_probe: device attach failed
[ 2317.370500] sdioh_probe: bcmsdh_probe failed
[ 2317.370658] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error -12
[ 2329.370257] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[ 2329.370654] wifi_platform_set_power = 0
[ 2329.370692] ======== PULL WL_REG_ON LOW! ========
[ 2329.370729] wifi_platform_bus_enumerate device present 0
[ 2329.370764] ======== Card detection to remove SDIO card! ========
[ 2329.370924] unregister wifi platform drivers
[ 2329.370964] wifi_platform_bus_enumerate device present 0
[ 2329.370998] ======== Card detection to remove SDIO card! ========
[ 2329.371085] dhd_module_init: Failed to load the driver, try cnt 2
[ 2329.371235] ======== bcm_wlan_set_plat_data ========
[ 2329.371283] bcm_wlan_get_oob_irq enter.
[ 2329.371330] gpio [202] map to virq [10] ok
[ 2329.371361] host_oob_irq: 10
[ 2329.371388] host_oob_irq_flags=0x414
[ 2329.371417] dhd_wifi_platform_load: Enter
[ 2329.371498] Power-up adapter 'DHD generic adapter'
[ 2329.371535] wifi_platform_set_power = 1
[ 2329.371564] ======== PULL WL_REG_ON HIGH! ========
[ 2329.371598] [wifi_pm]: set wl_reg_on 0 !
[ 2329.480299] mmc1: card 0001 removed
[ 2329.480555] [mmc]: sdc1 power_supply is null
[ 2329.571668] [wifi_pm]: set wl_reg_on 1 !
[ 2330.080347] wifi_platform_bus_enumerate device present 1
[ 2330.080399] ======== Card detection to detect SDIO card! ========
[ 2330.082322] [mmc]: sdc1 power_supply is null
[ 2330.138307] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2330.139950] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2330.141633] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2330.144548] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2330.162955] mmc1: new high speed SDIO card at address 0001
[ 2330.180442] bcmsdh_register: register client driver
[ 2330.180628] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2330.180762] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2330.180774] bus num (host idx)=1, slot num (rca)=1
[ 2330.180784] found adapter info 'DHD generic adapter'
[ 2330.180873] sdioh_attach: set sd_f2_blocksize 128
[ 2330.181426] F1 signature read @0x18000000=0x1591a962
[ 2330.181788] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 2330.184647] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 2330.185705] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 2330.186613] dhd_conf_set_chiprev: chip=0xa962, chiprev=1
[ 2330.186686] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
[ 2330.186724] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2330.189869] wl_create_event_handler(): thread:wl_event_handler:1829 started
[ 2330.189885] tsk Enter, tsk = 0xe4a81430
[ 2330.190439] dhd_attach(): thread:dhd_watchdog_thread:182a started
[ 2330.190550] dhd_attach(): thread:dhd_dpc:182b started
[ 2330.190594] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2330.193180] dhd_attach(): thread:dhd_rxf:182d started
[ 2330.193209] dhd_deferred_work_init: work queue initialized
[ 2330.193605] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2330.193629] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2330.193643] dhdsdio_download_firmware: set use_rxchain 0
[ 2330.193652] dhdsdio_download_firmware: set txglomsize 16
[ 2330.193662] sdioh_set_mode: set txglom_mode to multi-desc
[ 2330.193671] Final fw_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2330.193680] Final nv_path=/lib/firmware/ap6212/nvram.txt
[ 2330.193688] Final conf_path=/lib/firmware/ap6212/config.txt
[ 2330.194411] dhdsdio_download_code_file: Open firmware file failed /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2330.194428] _dhdsdio_download_firmware: dongle image file download failed
[ 2330.194482] dhd_bus_start: failed to download firmware /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2330.194495] dhdsdio_probe: dhd_bus_start failed
[ 2330.194506] bcmsdh_oob_intr_unregister: Enter
[ 2330.194514] bcmsdh_oob_intr_unregister: irq is not registered
[ 2330.194526] dhd_wlfc_deinit():3301, Already disabled!
[ 2330.240506] dhd_detach(): thread:dhd_watchdog_thread:182a terminated OK
[ 2330.240553] dhd_detach(): thread:dhd_rxf:182d terminated OK
[ 2330.240581] dhd_dpc_thread: Unexpected up_cnt 0
[ 2330.240634] dhd_detach(): thread:dhd_dpc:182b terminated OK
[ 2330.241527] wl_event_handler: was terminated
[ 2330.241639] wl_destroy_event_handler(): thread:wl_event_handler:1829 terminated OK
[ 2330.300438] dhd_os_prealloc: failed to alloc memory, section: 7, size: 0bytes
[ 2330.300460] bcmsdh_probe: device attach failed
[ 2330.300469] sdioh_probe: bcmsdh_probe failed
[ 2330.300628] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error -12
[ 2342.300099] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[ 2342.300234] wifi_platform_set_power = 0
[ 2342.300244] ======== PULL WL_REG_ON LOW! ========
[ 2342.300251] wifi_platform_bus_enumerate device present 0
[ 2342.300259] ======== Card detection to remove SDIO card! ========
[ 2342.300314] unregister wifi platform drivers
[ 2342.300322] wifi_platform_bus_enumerate device present 0
[ 2342.300329] ======== Card detection to remove SDIO card! ========
[ 2342.300355] dhd_module_init: Failed to load the driver, try cnt 1
[ 2342.300387] ======== bcm_wlan_set_plat_data ========
[ 2342.300401] bcm_wlan_get_oob_irq enter.
[ 2342.300413] gpio [202] map to virq [10] ok
[ 2342.300420] host_oob_irq: 10
[ 2342.300425] host_oob_irq_flags=0x414
[ 2342.300432] dhd_wifi_platform_load: Enter
[ 2342.300459] Power-up adapter 'DHD generic adapter'
[ 2342.300467] wifi_platform_set_power = 1
[ 2342.300473] ======== PULL WL_REG_ON HIGH! ========
[ 2342.300481] [wifi_pm]: set wl_reg_on 0 !
[ 2342.390317] mmc1: card 0001 removed
[ 2342.390553] [mmc]: sdc1 power_supply is null
[ 2342.500506] [wifi_pm]: set wl_reg_on 1 !
[ 2343.010074] wifi_platform_bus_enumerate device present 1
[ 2343.010091] ======== Card detection to detect SDIO card! ========
[ 2343.011704] [mmc]: sdc1 power_supply is null
[ 2343.067551] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2343.069245] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2343.070929] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2343.073830] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2343.090685] mmc1: new high speed SDIO card at address 0001
[ 2343.107543] bcmsdh_register: register client driver
[ 2343.107699] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2343.107816] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2343.107827] bus num (host idx)=1, slot num (rca)=1
[ 2343.107837] found adapter info 'DHD generic adapter'
[ 2343.107931] sdioh_attach: set sd_f2_blocksize 128
[ 2343.108512] F1 signature read @0x18000000=0x1591a962
[ 2343.108804] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 2343.112133] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 2343.113191] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 2343.114089] dhd_conf_set_chiprev: chip=0xa962, chiprev=1
[ 2343.114161] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
[ 2343.114201] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2343.118961] wl_create_event_handler(): thread:wl_event_handler:182f started
[ 2343.118977] tsk Enter, tsk = 0xe4a81430
[ 2343.119519] dhd_attach(): thread:dhd_watchdog_thread:1830 started
[ 2343.119621] dhd_attach(): thread:dhd_dpc:1831 started
[ 2343.119639] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2343.119727] dhd_attach(): thread:dhd_rxf:1832 started
[ 2343.119756] dhd_deferred_work_init: work queue initialized
[ 2343.120955] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2343.120987] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2343.121004] dhdsdio_download_firmware: set use_rxchain 0
[ 2343.121016] dhdsdio_download_firmware: set txglomsize 16
[ 2343.121028] sdioh_set_mode: set txglom_mode to multi-desc
[ 2343.121038] Final fw_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2343.121050] Final nv_path=/lib/firmware/ap6212/nvram.txt
[ 2343.121058] Final conf_path=/lib/firmware/ap6212/config.txt
[ 2343.122190] dhdsdio_download_code_file: Open firmware file failed /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2343.122215] _dhdsdio_download_firmware: dongle image file download failed
[ 2343.122276] dhd_bus_start: failed to download firmware /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2343.122290] dhdsdio_probe: dhd_bus_start failed
[ 2343.122302] bcmsdh_oob_intr_unregister: Enter
[ 2343.122310] bcmsdh_oob_intr_unregister: irq is not registered
[ 2343.122321] dhd_wlfc_deinit():3301, Already disabled!
[ 2343.171469] dhd_detach(): thread:dhd_watchdog_thread:1830 terminated OK
[ 2343.171505] dhd_detach(): thread:dhd_rxf:1832 terminated OK
[ 2343.171550] dhd_dpc_thread: Unexpected up_cnt 0
[ 2343.171602] dhd_detach(): thread:dhd_dpc:1831 terminated OK
[ 2343.172659] wl_event_handler: was terminated
[ 2343.172843] wl_destroy_event_handler(): thread:wl_event_handler:182f terminated OK
[ 2343.240572] dhd_os_prealloc: failed to alloc memory, section: 7, size: 0bytes
[ 2343.240596] bcmsdh_probe: device attach failed
[ 2343.240606] sdioh_probe: bcmsdh_probe failed
[ 2343.240748] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error -12
[ 2355.240101] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[ 2355.240257] wifi_platform_set_power = 0
[ 2355.240269] ======== PULL WL_REG_ON LOW! ========
[ 2355.240277] wifi_platform_bus_enumerate device present 0
[ 2355.240285] ======== Card detection to remove SDIO card! ========
[ 2355.240361] unregister wifi platform drivers
[ 2355.240374] wifi_platform_bus_enumerate device present 0
[ 2355.240382] ======== Card detection to remove SDIO card! ========
[ 2355.240409] dhd_module_init: Failed to load the driver, try cnt 0
[ 2355.240441] dhd_module_init: Failed to load driver max retry reached**
[ 2355.240449] dhd_module_init: Exit err=-62
[ 2355.270440] mmc1: card 0001 removed
[ 2355.270738] [mmc]: sdc1 power_supply is null
[ 2355.322465] dhd_module_init: in
[ 2355.322485] ======== bcm_wlan_set_plat_data ========
[ 2355.322500] bcm_wlan_get_oob_irq enter.
[ 2355.322515] gpio [202] map to virq [10] ok
[ 2355.322522] host_oob_irq: 10
[ 2355.322527] host_oob_irq_flags=0x414
[ 2355.322534] dhd_wifi_platform_load: Enter
[ 2355.322576] Power-up adapter 'DHD generic adapter'
[ 2355.322586] wifi_platform_set_power = 1
[ 2355.322594] ======== PULL WL_REG_ON HIGH! ========
[ 2355.322604] [wifi_pm]: set wl_reg_on 0 !
[ 2355.522926] [wifi_pm]: set wl_reg_on 1 !
[ 2356.030224] wifi_platform_bus_enumerate device present 1
[ 2356.030261] ======== Card detection to detect SDIO card! ========
[ 2356.032146] [mmc]: sdc1 power_supply is null
[ 2356.089794] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2356.091657] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2356.093900] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2356.097016] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2356.116342] mmc1: new high speed SDIO card at address 0001
[ 2356.133390] bcmsdh_register: register client driver
[ 2356.133607] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2356.134389] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2356.134411] bus num (host idx)=1, slot num (rca)=1
[ 2356.134424] found adapter info 'DHD generic adapter'
[ 2356.134576] sdioh_attach: set sd_f2_blocksize 128
[ 2356.135159] F1 signature read @0x18000000=0x1591a962
[ 2356.135474] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 2356.139275] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 2356.141007] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 2356.142242] dhd_conf_set_chiprev: chip=0xa962, chiprev=1
[ 2356.142319] dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
[ 2356.142364] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2356.143393] tsk Enter, tsk = 0xe6001430
[ 2356.143428] wl_create_event_handler(): thread:wl_event_handler:1834 started
[ 2356.144462] dhd_attach(): thread:dhd_watchdog_thread:1835 started
[ 2356.144600] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2356.144642] dhd_attach(): thread:dhd_dpc:1836 started
[ 2356.144784] dhd_attach(): thread:dhd_rxf:1837 started
[ 2356.144807] dhd_deferred_work_init: work queue initialized
[ 2356.145431] dhd_conf_read_config: Ignore config file /lib/firmware/ap6212/config.txt
[ 2356.145455] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2356.145469] dhdsdio_download_firmware: set use_rxchain 0
[ 2356.145478] dhdsdio_download_firmware: set txglomsize 16
[ 2356.145489] sdioh_set_mode: set txglom_mode to multi-desc
[ 2356.145497] Final fw_path=/lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2356.145506] Final nv_path=/lib/firmware/ap6212/nvram.txt
[ 2356.145514] Final conf_path=/lib/firmware/ap6212/config.txt
[ 2356.146708] dhdsdio_download_code_file: Open firmware file failed /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2356.146728] _dhdsdio_download_firmware: dongle image file download failed
[ 2356.146790] dhd_bus_start: failed to download firmware /lib/firmware/ap6212/fw_bcm40181a2.bin
[ 2356.146803] dhdsdio_probe: dhd_bus_start failed
[ 2356.146815] bcmsdh_oob_intr_unregister: Enter
[ 2356.146823] bcmsdh_oob_intr_unregister: irq is not registered
[ 2356.146835] dhd_wlfc_deinit():3301, Already disabled!
[ 2356.220183] dhd_detach(): thread:dhd_watchdog_thread:1835 terminated OK
[ 2356.220216] dhd_detach(): thread:dhd_rxf:1837 terminated OK
[ 2356.220238] dhd_dpc_thread: Unexpected up_cnt 0
[ 2356.220297] dhd_detach(): thread:dhd_dpc:1836 terminated OK
[ 2356.220636] wl_event_handler: was terminated
[ 2356.220739] wl_destroy_event_handler(): thread:wl_event_handler:1834 terminated OK
[ 2356.270457] dhd_os_prealloc: failed to alloc memory, section: 7, size: 0bytes
[ 2356.270478] bcmsdh_probe: device attach failed
[ 2356.270488] sdioh_probe: bcmsdh_probe failed
[ 2356.270628] bcmsdh_sdmmc: probe of mmc1:0001:2 failed with error -12
-
Ok I've installed this OS but the wi-fi don't work yet. What can I do?
Inviato dal mio Redmi 4A utilizzando Tapatalk -
Hi guys,
I'm sorry for the english but I'm italian.
I'm a noob in Linux so I'm in search of someone that can help me.
First of all, I don't know what is the better h3 armbian version to install in it.
When i download the rtl8189es driver when i do "make" the console release error 2. Thanks a lot for the help.
Inviato dal mio Redmi 4A utilizzando Tapatalk
Beelink x2 wifi problems
in Allwinner CPU Boxes
Posted
The output is:
The output from sudo depmod -ae is: