[new build installation from github fails on download_and_verify]

docker build on storage host slooooowly coming along ....

 

sigh.

[new build installation from github fails on download_and_verify]

Just created a new native VM 18.04 to build in. Works fine on the VMs local storage.

 

Same failures with a remote ext4 mount.

 

Time to buy more local storage. 

[new build installation from github fails on download_and_verify]

ack! spoke to soon. closer:

Displaying message: Building deb linux-u-boot-current-nanopim4_19.11.4_arm64.deb info
dpkg-deb: error: control directory has bad permissions 700 (must be >=0755 and <=0775)
Displaying message: ERROR in function compile_uboot compilation.sh:257 err

 

[new build installation from github fails on download_and_verify]

Yes, the native is a clean 18.04 with kernel:

Linux 5.0.0-37-generic #40~18.04.1-Ubuntu SMP Thu Nov 14 12:06:39 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

 

[new build installation from github fails on download_and_verify]

The vagrant issues in that thread look familiar,

 

The docker build is proceding so am guessing it's one of the dependancies that got installed in the docker container. PGP validation seems to working without issue but still going.

 

From past experience, if it's installing the toolchain without issue, it's fine.

 

Thanks!

[new build installation from github fails on download_and_verify]

will give that a go - will take a while to setup, the vagrant option (what I used to use) is misbehaving but will start a separate thread on that.

[new build installation from github fails on download_and_verify]

already installed at latest version

[new build installation from github fails on download_and_verify]

Still fails on installing the toolchain with the same gpg error as above.

 

Including output/debug/output.log

[new build installation from github fails on download_and_verify]

Yes, same errors.

 

Have also had a quick look for public keys to add to gpg's key manager but no luck so far.

[new build installation from github fails on download_and_verify]

Hi,

 

I was just setting up a new armbian build environment following the usual github instructions on a bionic 18.04.3 system.

 

Running ./compile.sh (alone or with any configuration) generates the following error:

[ o.k. ] Checking for external GCC compilers 
[ .... ] downloading using torrent network [ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz ]
[ error ] ERROR in function download_and_verify [ general.sh:1026 ]                                                                   [ error ] verification failed 

 

From the output/debug/output.log

Displaying message: Checking for external GCC compilers  info
Displaying message: downloading using torrent network gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
gpg: error reading key: No public key
gpg: DBG: locking for '/media/psf/ssd1TB/armbian/cache/.gpg/gnupg_spawn_dirmngr_sentinel.lock' done via O_EXCL
gpg: connecting dirmngr at '/media/psf/ssd1TB/armbian/cache/.gpg/S.dirmngr' failed: IPC connect call failed
gpg: keyserver receive failed: No dirmngr
gpg: error reading key: No public key
gpg: DBG: locking for '/media/psf/ssd1TB/armbian/cache/.gpg/gnupg_spawn_dirmngr_sentinel.lock' done via O_EXCL
gpg: connecting dirmngr at '/media/psf/ssd1TB/armbian/cache/.gpg/S.dirmngr' failed: IPC connect call failed
gpg: keyserver receive failed: No dirmngr
gpg: assuming signed data in '/media/psf/ssd1TB/armbian/cache/toolchains/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz'
gpg: Signature made Tue 19 Nov 2013 09:00:03 AM GMT
gpg:                using RSA key D47877808F427EAF
gpg: Can't check signature: No public key
Displaying message: ERROR in function download_and_verify general.sh:1026 err
Displaying message: verification failed  err
Displaying message: Process terminated  info

 

Any suggestions?

 

M.