lazydino
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by lazydino
-
-
On 12/22/2019 at 7:16 PM, Sergey2k said:
On X96 Air wired network works if to set "negotiation" to "manual" and "speed" to "100 mb duplex" only. On Auto don't see connected cable.
On my Ugoos X3 Plus, if I use meson-g12b-odroid-n2.dtb , I can use ethernet port and dmesg and other linux tools say that I have giga network connectivity while speedtest.net just show a fraction of the right speed... I won't be able to get wifi working with odroid-n2 dtb file but if I use sm1-sei610.dtb, wifi is good but it can't see connected ethernet cable.
-
Thanks for help! My Ugoos X3 can run armbian without issues now. I use kernel 5.5 image downloaded from https://yadi.sk/d/_rQgn_FosYuW0g/19.11.3/20191219 with NicoD's U-boot fix. Color and network are both fixed.
-
9 hours ago, balbes150 said:
You forgot to add the file "u-boot.ext"
Pardon me for my ignorance. Where can I get u-boot.ext and what file should I change? According to this post, since I am not installing Armbian into eMMC, I should be fine only updating uEnv.ini with dtb_name=/dtb/amlogic/meson-sm1-sei610.dtb. Please be a bit specific or forward me link to instructions. Do I need to root into my device to find out information about network driver? Thanks!
-
On 12/9/2019 at 3:07 AM, Sergey2k said:
You are right. I extracted image on SD card and system booted normally (see photo below). Thank you.
Next problem is wired network (wifi works good).
There is log of errors:Dec 09 10:45:37 rk3399 kernel: meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found Dec 09 10:45:37 rk3399 kernel: meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found Dec 09 10:45:37 rk3399 kernel: dwc3 ff500000.usb: Failed to get clk 'ref': -2 Dec 09 10:45:37 rk3399 kernel: gpio-keys gpio-keys: Unable to get irq number for GPIO 0, error -6 Dec 09 10:45:37 rk3399 kernel: debugfs: Directory 'ff800280.cec' with parent 'regmap' already present! Dec 09 10:45:38 rk3399 kernel: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 Dec 09 10:45:39 rk3399 kernel: meson8b-dwmac ff3f0000.ethernet eth0: no phy at addr -1 Dec 09 10:45:39 rk3399 kernel: meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19) Dec 09 10:45:39 rk3399 dhclient[655]: send_packet: Network is down Dec 09 10:45:39 rk3399 dhclient[655]: dhclient.c:2445: Failed to send 300 byte long packet over eth0 interface. Dec 09 10:45:39 rk3399 dhclient[655]: receive_packet failed on eth0: Network is down Dec 09 10:45:40 rk3399 kernel: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 Dec 09 10:45:41 rk3399 kernel: brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04 Dec 09 10:45:47 rk3399 dhclient[655]: send_packet: Network is down Dec 09 10:45:47 rk3399 dhclient[655]: dhclient.c:2445: Failed to send 300 byte long packet over eth0 interface. Dec 09 10:45:49 rk3399 bluetoothd[829]: Sap driver initialization failed. Dec 09 10:45:49 rk3399 bluetoothd[829]: sap-server: Operation not permitted (1) Dec 09 10:45:50 rk3399 NetworkManager[846]: ((src/settings/nm-settings.c:899)): assertion '<dropped>' failed Dec 09 10:45:50 rk3399 kernel: meson8b-dwmac ff3f0000.ethernet eth0: no phy at addr -1 Dec 09 10:45:50 rk3399 kernel: meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
My TV Box is Ugoos X3 Plus I have tried Armbian_5.99_Aml-g12_Debian_buster_dev_5.4.0-rc6_20191110.img and Armbian_5.99_Aml-g12_Ubuntu_bionic_dev_5.4.0-rc6_desktop_20191110.img .The images are extracted to TF cards, but I still have the same color and network issues as you posted. What did you do to fix color?
Single Armbian image for RK + AML + AW (aarch64 ARMv8)
in General Chat
Posted
I am trying to see if I can turn my X3-Plus ( S905X3 ) can run Armbian_20.05.2_Arm-64_bionic_current_5.7.0-rc1_desktop_20200418.img as a digital music computer for MIDI application. I tried meson-sm1-sei610.dtb, the sound is working but 'aconnect -l' shows
reggie@arm-64:~$ aconnect -l
ALSA lib seq_hw.c:466:(snd_seq_hw_open) open /dev/snd/seq failed: No such file or directory
can't open sequencer
How to fix it?
Thanks for the hard work.