Jump to content

Spider

Members
 View Profile  See their activity

  • Posts

    5

  • Joined

  • Last visited

 Content Type 

Posts posted by Spider

    Errors on Boot OPi Lite2

    in Allwinner sunxi

    Posted

    Is it normal? Why  Couldn't get bank PG regulator 

    U-Boot SPL 2019.10-armbian (Feb 17 2020 - 08:31:10 +0100)
DRAM: 1024 MiB
Trying to boot from MMC1
NOTICE:  BL31: v2.2(debug):572fcdd-dirty
NOTICE:  BL31: Built : 08:31:00, Feb 17 2020
NOTICE:  BL31: Detected Allwinner H6 SoC (1728)
NOTICE:  BL31: Found U-Boot DTB at 0xc07ef00, model: OrangePi Lite 2
INFO:    ARM GICv2 driver initialized
INFO:    PMIC: Probing AXP805 on I2C
INFO:    PMIC: aldo1 voltage: 3.300V
INFO:    PMIC: aldo3 voltage: 3.300V
INFO:    PMIC: bldo1 voltage: 1.800V
INFO:    PMIC: bldo2 voltage: 1.800V
INFO:    PMIC: bldo3 voltage: 1.800V
INFO:    PMIC: cldo1 voltage: 3.300V
INFO:    PMIC: dcdcd voltage: 0.960V
INFO:    PMIC: dcdce voltage: 1.200V
INFO:    BL31: Platform setup done
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a53: CPU workaround for 855873 was applied
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x4a000000
INFO:    SPSR = 0x3c9


U-Boot 2019.10-armbian (Feb 17 2020 - 08:31:10 +0100) Allwinner Technology

CPU:   Allwinner H6 (SUN50I)
Model: OrangePi Lite 2
DRAM:  1 GiB
MMC:   mmc@4020000: 0
Loading Environment from EXT4... ** File not found /boot/boot.env **

** Unable to read "/boot/boot.env" from mmc0:1 **
In:    serial@5000000
Out:   serial@5000000
Err:   serial@5000000
Net:   No ethernet found.
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3033 bytes read in 6 ms (493.2 KiB/s)
## Executing script at 4fc00000
U-boot loaded from SD
Boot script loaded from mmc
291 bytes read in 5 ms (56.6 KiB/s)
32785 bytes read in 14 ms (2.2 MiB/s)
4161 bytes read in 15 ms (270.5 KiB/s)
Applying kernel provided DT fixup script (sun50i-h6-fixup.scr)
## Executing script at 44000000
7655747 bytes read in 775 ms (9.4 MiB/s)
15687688 bytes read in 1579 ms (9.5 MiB/s)
## Loading init Ramdisk from Legacy Image at 4fe00000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    7655683 Bytes = 7.3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 4fa00000
   Booting using the fdt blob at 0x4fa00000
   Loading Ramdisk to 498b2000, end 49fff103 ... OK
   Loading Device Tree to 0000000049841000, end 00000000498b1fff ... OK

Starting kernel ...

[    2.297662] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PG regulator
[    2.304821] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 198
[    2.311791] sun50i-h6-pinctrl 300b000.pinctrl: pin-198 (5000400.serial) status -517
[    2.319453] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 198 (PG6) from group PG6  on device 300b000.pinctrl
[    2.330321] dw-apb-uart 5000400.serial: Error applying setting, reverse things back
[    2.541572] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PG regulator
[    2.548826] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 192
[    2.555873] sun50i-h6-pinctrl 300b000.pinctrl: pin-192 (4021000.mmc) status -517
[    2.563357] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 192 (PG0) from group PG0  on device 300b000.pinctrl
[    2.574353] sunxi-mmc 4021000.mmc: Error applying setting, reverse things back
[    2.582052] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
[    2.589282] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
[    2.596240] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
[    2.604594] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PG regulator
[    2.611819] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 198
[    2.618865] sun50i-h6-pinctrl 300b000.pinctrl: pin-198 (5000400.serial) status -517
[    2.626612] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 198 (PG6) from group PG6  on device 300b000.pinctrl
[    2.637601] dw-apb-uart 5000400.serial: Error applying setting, reverse things back
[    2.647257] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PG regulator
[    2.654501] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 192
[    2.661550] sun50i-h6-pinctrl 300b000.pinctrl: pin-192 (4021000.mmc) status -517
[    2.669035] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 192 (PG0) from group PG0  on device 300b000.pinctrl
[    2.680023] sunxi-mmc 4021000.mmc: Error applying setting, reverse things back
[    2.687515] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
[    2.694750] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
[    2.701718] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
[    2.710085] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PG regulator
[    2.717319] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 198
[    2.724368] sun50i-h6-pinctrl 300b000.pinctrl: pin-198 (5000400.serial) status -517
[    2.732120] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 198 (PG6) from group PG6  on device 300b000.pinctrl
[    2.743111] dw-apb-uart 5000400.serial: Error applying setting, reverse things back
[    2.752766] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PG regulator
[    2.760001] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 192
[    2.767060] sun50i-h6-pinctrl 300b000.pinctrl: pin-192 (4021000.mmc) status -517
[    2.774548] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 192 (PG0) from group PG0  on device 300b000.pinctrl
[    2.785544] sunxi-mmc 4021000.mmc: Error applying setting, reverse things back
[    3.075680] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
[    3.083006] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
[    3.090009] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
[    3.098672] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PG regulator
[    3.105942] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 198
[    3.113041] sun50i-h6-pinctrl 300b000.pinctrl: pin-198 (5000400.serial) status -517
[    3.120854] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 198 (PG6) from group PG6  on device 300b000.pinctrl
[    3.131907] dw-apb-uart 5000400.serial: Error applying setting, reverse things back
[    3.142360] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PG regulator
[    3.149644] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 192
[    3.156704] sun50i-h6-pinctrl 300b000.pinctrl: pin-192 (4021000.mmc) status -517
[    3.164198] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 192 (PG0) from group PG0  on device 300b000.pinctrl
[    3.175201] sunxi-mmc 4021000.mmc: Error applying setting, reverse things back
[    3.184840] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PC regulator
[    3.192143] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 70
[    3.199107] sun50i-h6-pinctrl 300b000.pinctrl: pin-70 (300b000.pinctrl:70) status -517
[    3.199593] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PG regulator
[    3.214352] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 198
[    3.214358] sun50i-h6-pinctrl 300b000.pinctrl: pin-198 (5000400.serial) status -517
[    3.229144] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 198 (PG6) from group PG6  on device 300b000.pinctrl
[    3.229150] dw-apb-uart 5000400.serial: Error applying setting, reverse things back
[    3.250438] sun50i-h6-pinctrl 300b000.pinctrl: Couldn't get bank PG regulator
[    3.257692] sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 192
[    3.257699] sun50i-h6-pinctrl 300b000.pinctrl: pin-192 (4021000.mmc) status -517
[    3.257706] sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 192 (PG0) from group PG0  on device 300b000.pinctrl
[    3.272233] sunxi-mmc 4021000.mmc: Error applying setting, reverse things back

Armbian 20.02.1 Buster ttyS0

orangepilite2 login:
    0

    Can't start Bluetooth on Orange Pi Zero Plus 2 H5

    in Allwinner sunxi

    Posted

    :)

    Thx, for reply. But I finaly launch BT device.

    Next steps:

    1. Disable uart1 overlay

    2. copyed firmware for ap6212 from last broadcom package into /lib/firmware/bcm....

    3. modified ap6212-bluetooth

          - at start add: 

            devmem2 0x1f00060 b 1
        echo 10 > /sys/class/gpio/export
        echo out > /sys/class/gpio/gpio10/direction
        echo 0 > /sys/class/gpio/gpio10/value
        echo 1 > /sys/class/gpio/gpio10/value
        sleep 0.1

          - at end add: (else after soft reboot wifi will not work) 

            devmem2 0x1f00060 b 0
        echo 10 > /sys/class/gpio/export
        echo out > /sys/class/gpio/gpio10/direction
        echo 0 > /sys/class/gpio/gpio10/value

        sleep 0.1

        echo 10 > /sys/class/gpio/unexport
        sleep 0.1

    0

    Can't start Bluetooth on Orange Pi Zero Plus 2 H5

    in Allwinner sunxi

    Posted

    Hello!

     

    I'm tryiing to make iBeacon scan service. But can't make Bluetooth work on OPi0+2H5.

    I'm using "Armbian_20.02.1_Orangepizeroplus2-h5_bionic_current_5.4.20_minimal.img" as OS, but no hci devices in system after start. I reded many topics from this forum and nothig helps me. Can't start BT :(

    Is BlueTooth part work on this board? Can I use it?

    I need only "lescan" functional....

    0
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines

  I accept