magixx256
-
Posts
2 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by magixx256
-
-
So initially I had some trouble booting the Armbian images even the one I built locally.
I'm certain this was because I had not properly wiped the MicroSD card after trying out the images from Orange Pi (I ended up using gparted to create an new msdos partition table) .
Anyway I got around to testing some of the images and though I'd post the state of those as well:1. Armbian_19.11.9_Orangepi4_buster_current_5.4.16_minimal.img
This was the image found here on Page 3 posted by @piter75
It seemed to boot fine. eth0 and WLAN exist but I did not get connectivity (this was an issue with my router)
https://asciinema.org/a/3134132. Armbian_20.02.6_Orangepi4_bionic_current_5.4.27_minimal.img
Downloaded from https://www.armbian.com/orange-pi-4/#kernels-archive-all
Some issues seen during booting, but eventually it boots.
eth0 and WLAN exist but I did not get connectivity due to my router
https://asciinema.org/a/3134243. Armbian_20.05.0-trunk_Orangepi4_bionic_current_5.4.27_minimal.img
Image built locally using the docker guide.
Kernel seems to take a bit longer to boot and there is no output from it as before.
eth0 and WLAN exist, after messing with router eth0 works as expected.
https://asciinema.org/a/313427
Image available at https://mega.nz/#!jgZmzAzb!yp-g2viNrXAjO-rpM_25meDVBNSxOo2I8gOqD6t-p7g4. Armbian_20.05.0-trunk_Orangepi4_bionic_dev_5.5.13_minimal.img
Image built locally using the docker guide.
Kernel seems to take a bit longer to boot and there is no output from it as before.
eth0 and WLAN exist, after messing with router eth0 works as expected.
https://asciinema.org/a/313445
Image available at https://mega.nz/#!LpIinS5I!MzscJ_tS5S4_5pcxpz5CZXKUeFxf3LdeE8IBIfORl-A
All images flashed with Etcher
MicroSD was Samsung Evo Select 64GB
Board was OrangePi 4 4GB v1.3 without eMMC (cheapest config for this RAM)
PSU was the USB barrel connector to a known good phone charger.I also tried out the mPCIe adapter with a mPCIe SATA card (ASM1061). The speeds were disappointing at max 210mb/s considering the card can definitely do 350mb/s+ in my laptop.
I had hoped the newest os/kernel version would solve this, but it does not appear to do so. Maybe my testing methodology is wrong but I am doubting this after trying 2 different cards and multiple OSs.
Another thing to note is that this board runs hot at ~75*C even with a small heatsink (no fan was used) and little going on.
If anyone has something they'd like me to try then please ask.
Efforts to develop firmware for H96 MAX V56 RK3566 4G/32G
in Rockchip CPU Boxes
Posted
I'm impressed with the efforts to get armbian on this device. I think for now I'll try termux andronix. Does anyone know if while in android adb is enabled?