just installed Armbian_20.05.0_Arm-64_bullseye_current_5.6.0-rc6_20200326.img.xz on beelink gt-1 (amlogic s912) with FDT=/dtb/amlogic/meson-gxm-q200.dtb and.. all works! but until i'm trying to upgrade or some packages to upgrade some of system libs.. lan dont working (cable, wifi working). in dmesg there's lines
[ 2590.051321] meson8b-dwmac c9410000.ethernet eth0: no phy at addr -1
[ 2590.051343] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
last thing before its became broken was upgrading: sudo apt-get install binutils (full log in spoiler
Spoiler
user@arm:~$ sudo apt-get install binutils
[sudo] password for hotery:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
binutils : Depends: binutils-aarch64-linux-gnu (= 2.34-5) but 2.34-4 is to be installed
binutils-aarch64-linux-gnu : Depends: binutils-common (= 2.34-4) but 2.34-5 is to be installed
Depends: libbinutils (= 2.34-4) but 2.34-5 is to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
user@arm:~$ apt-mark unhold binutuls-aarch64-linux-gnu
E: Unable to locate package binutuls-aarch64-linux-gnu
E: No packages found
user@arm:~$ apt-mark unhold binutils-aarch64-linux-gnu
dpkg: error: required read/write access to the dpkg database directory /var/lib/dpkg
E: Sub-process dpkg --set-selections returned an error code (2)
E: Executing dpkg failed. Are you root?
user@arm:~$ sudo apt-mark unhold binutils-aarch64-linux-gnu
Canceled hold on binutils-aarch64-linux-gnu.
user@arm:~$ sudo apt-get install binutils
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following package was automatically installed and is no longer required:
libprocps7
Use 'sudo apt autoremove' to remove it.
The following additional packages will be installed:
binutils-aarch64-linux-gnu binutils-common libbinutils libctf0
Suggested packages:
binutils-doc
The following packages will be upgraded:
binutils binutils-aarch64-linux-gnu binutils-common libbinutils libctf0
5 upgraded, 0 newly installed, 0 to remove and 13 not upgraded.
Need to get 4,570 kB of archives.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://httpredir.debian.org/debian bullseye/main arm64 libctf0 arm64 2.34-5 [41.7 kB]
Get:2 http://httpredir.debian.org/debian bullseye/main arm64 binutils-aarch64-linux-gnu arm64 2.34-5 [1,936 kB]
Get:3 http://httpredir.debian.org/debian bullseye/main arm64 libbinutils arm64 2.34-5 [470 kB]
Get:4 http://httpredir.debian.org/debian bullseye/main arm64 binutils arm64 2.34-5 [59.0 kB]
Get:5 http://httpredir.debian.org/debian bullseye/main arm64 binutils-common arm64 2.34-5 [2,063 kB]
Fetched 4,570 kB in 10s (445 kB/s)
(Reading database ... 37614 files and directories currently installed.)
Preparing to unpack .../libctf0_2.34-5_arm64.deb ...
Unpacking libctf0:arm64 (2.34-5) over (2.34-4) ...
Preparing to unpack .../binutils-aarch64-linux-gnu_2.34-5_arm64.deb ...
Unpacking binutils-aarch64-linux-gnu (2.34-5) over (2.34-4) ...
Preparing to unpack .../libbinutils_2.34-5_arm64.deb ...
Unpacking libbinutils:arm64 (2.34-5) over (2.34-4) ...
Preparing to unpack .../binutils_2.34-5_arm64.deb ...
Unpacking binutils (2.34-5) over (2.34-4) ...
Preparing to unpack .../binutils-common_2.34-5_arm64.deb ...
Unpacking binutils-common:arm64 (2.34-5) over (2.34-4) ...
Setting up binutils-common:arm64 (2.34-5) ...
Setting up libbinutils:arm64 (2.34-5) ...
Setting up libctf0:arm64 (2.34-5) ...
Setting up binutils-aarch64-linux-gnu (2.34-5) ...
Setting up binutils (2.34-5) ...
Processing triggers for libc-bin (2.29-10) ...
Processing triggers for man-db (2.9.1-1) ...
things like apt-cache showpkg libbinutils or sudo apt-get install binutils-aarch64-linux-gnu-2.34.4 gives nothing, and in http://ftp.debian.org/debian/pool/main/b/binutils/ no such version. but maybe thats not a reason of broken lan.. please help to repair it..
Single Armbian image for RK + AML + AW (aarch64 ARMv8)
in General Chat
Posted
just installed Armbian_20.05.0_Arm-64_bullseye_current_5.6.0-rc6_20200326.img.xz on beelink gt-1 (amlogic s912) with FDT=/dtb/amlogic/meson-gxm-q200.dtb and.. all works! but until i'm trying to upgrade or some packages to upgrade some of system libs.. lan dont working (cable, wifi working). in dmesg there's lines
[ 2590.051321] meson8b-dwmac c9410000.ethernet eth0: no phy at addr -1
[ 2590.051343] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
last thing before its became broken was upgrading: sudo apt-get install binutils (full log in spoiler
user@arm:~$ sudo apt-get install binutils
[sudo] password for hotery:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
binutils : Depends: binutils-aarch64-linux-gnu (= 2.34-5) but 2.34-4 is to be installed
binutils-aarch64-linux-gnu : Depends: binutils-common (= 2.34-4) but 2.34-5 is to be installed
Depends: libbinutils (= 2.34-4) but 2.34-5 is to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
user@arm:~$ apt-mark unhold binutuls-aarch64-linux-gnu
E: Unable to locate package binutuls-aarch64-linux-gnu
E: No packages found
user@arm:~$ apt-mark unhold binutils-aarch64-linux-gnu
dpkg: error: required read/write access to the dpkg database directory /var/lib/dpkg
E: Sub-process dpkg --set-selections returned an error code (2)
E: Executing dpkg failed. Are you root?
user@arm:~$ sudo apt-mark unhold binutils-aarch64-linux-gnu
Canceled hold on binutils-aarch64-linux-gnu.
user@arm:~$ sudo apt-get install binutils
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following package was automatically installed and is no longer required:
libprocps7
Use 'sudo apt autoremove' to remove it.
The following additional packages will be installed:
binutils-aarch64-linux-gnu binutils-common libbinutils libctf0
Suggested packages:
binutils-doc
The following packages will be upgraded:
binutils binutils-aarch64-linux-gnu binutils-common libbinutils libctf0
5 upgraded, 0 newly installed, 0 to remove and 13 not upgraded.
Need to get 4,570 kB of archives.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://httpredir.debian.org/debian bullseye/main arm64 libctf0 arm64 2.34-5 [41.7 kB]
Get:2 http://httpredir.debian.org/debian bullseye/main arm64 binutils-aarch64-linux-gnu arm64 2.34-5 [1,936 kB]
Get:3 http://httpredir.debian.org/debian bullseye/main arm64 libbinutils arm64 2.34-5 [470 kB]
Get:4 http://httpredir.debian.org/debian bullseye/main arm64 binutils arm64 2.34-5 [59.0 kB]
Get:5 http://httpredir.debian.org/debian bullseye/main arm64 binutils-common arm64 2.34-5 [2,063 kB]
Fetched 4,570 kB in 10s (445 kB/s)
(Reading database ... 37614 files and directories currently installed.)
Preparing to unpack .../libctf0_2.34-5_arm64.deb ...
Unpacking libctf0:arm64 (2.34-5) over (2.34-4) ...
Preparing to unpack .../binutils-aarch64-linux-gnu_2.34-5_arm64.deb ...
Unpacking binutils-aarch64-linux-gnu (2.34-5) over (2.34-4) ...
Preparing to unpack .../libbinutils_2.34-5_arm64.deb ...
Unpacking libbinutils:arm64 (2.34-5) over (2.34-4) ...
Preparing to unpack .../binutils_2.34-5_arm64.deb ...
Unpacking binutils (2.34-5) over (2.34-4) ...
Preparing to unpack .../binutils-common_2.34-5_arm64.deb ...
Unpacking binutils-common:arm64 (2.34-5) over (2.34-4) ...
Setting up binutils-common:arm64 (2.34-5) ...
Setting up libbinutils:arm64 (2.34-5) ...
Setting up libctf0:arm64 (2.34-5) ...
Setting up binutils-aarch64-linux-gnu (2.34-5) ...
Setting up binutils (2.34-5) ...
Processing triggers for libc-bin (2.29-10) ...
Processing triggers for man-db (2.9.1-1) ...
things like apt-cache showpkg libbinutils or sudo apt-get install binutils-aarch64-linux-gnu-2.34.4 gives nothing, and in http://ftp.debian.org/debian/pool/main/b/binutils/ no such version. but maybe thats not a reason of broken lan.. please help to repair it..