Jump to content

fr3d

Members
  • Posts

    12
  • Joined

  • Last visited

Everything posted by fr3d

  1. I would like to inform you all, that my sd card died, and upon reflection, I decided to download the CLI version, as I only used the graphic one, maybe twice till now. Now I've discovered that the wireless connectivity works absolutely fine in the Bookworm CLI version, I hope that maybe the upgrade would work as well with you too.
  2. Sorry for the long wait, but as the wireless solution wasn't working, I just used one of those POE splitter, plugged into the ethernet port, the USB micro B and it work. My work around POE splitter 5V microUSB. It's been working like a charm for the past 4 months..... In my basament just near my 3 other pis that are connected to my POE switch.
  3. @jock, I'm using WPA2, as my router the one from my ISP uses it, I don't have any spare routers, as the ISP usually take back his old model upon sending us the new one..... I also tried for a little time the official Debian distro for the tinkerboard, provided on the asus site. Same issue, that's why I came there.... Good evening @atone, thanks for the tips, now I'll try the solution I hadn't heard of yet. - nmtui, got me stuck on the loop of continuously asking for my password, and at the third time it gives up, telling me connection not working... fred@tinkerboard:~$ nmcli --fields UUID,TIMESTAMP-REAL con show | grep never | awk '{print $1}' | while read line; do nmcli con delete uuid $line; done Connection 'Devolo-Fr3d' (f78d8f2a-c13c-46e4-9f17-7f49a5df3f49) successfully deleted. fred@tinkerboard:~$ nmcli d wifi list IN-USE BSSID SSID MODE CHAN RATE SIGNAL BARS SECURITY F4:06:8D:53:4B:E0 Devolo-Fr3d Infra 11 130 Mbit/s 92 ▂▄▆█ WPA1 WPA2 30:D3:2D:0A:8A:68 Devolo-Fr3d Infra 6 130 Mbit/s 49 ▂▄__ WPA1 WPA2 fred@tinkerboard:~$ sudo nmcli --ask dev wifi connect "Devolo-Fr3d" [sudo] password for fred: Sorry, try again. [sudo] password for fred: Password: •••••••••• Error: Connection activation failed: (7) Secrets were required, but not provided. I tried countless time with "SSID", ''SSID'' (double apostrophe), 'SSID' and nothing, as in SSID but the device fail to connect, and I only have 6 devices on that Extender, on with Armbian 21 it worked like a piece of cake. I have no idea what it is intended for a wallet in 2 of the proposed solution, so I'm skipping them for now, mostly because the distro were different. As for the proposed solution to cancel the device from the router list is a real pain in the ass, will try tomorrow as I need to re read the user manual...
  4. Good evening, last week they changed the electric meter in my building, but in order to do so they cut the power, and my Tinkerboard (the first model, the one issued back in 2017, Asus first's SBC), that I use as my "Save for later, and never look at it again" network folder, suffered. It continued to reboot from some kernel panic, which I forgot to take note; but since it hadn't been upgraded to jammy, I took the opportunity to do it. Pluging in the uSD card (with the newly released jammy version, just downloaded here), power, and all (including the ethernet cord!!), first boot I have to create my user (which, for some reasons refuses to let me put my usual fr3d tag, obliging me to go with the common "fred", but OK ), then all the trivial steps to set my locale settings. Then the beautiful armbian desktop penguin greats me. Nice now some more little custumisations and I'm ready to go, or so I thought; the wireless connection doesn't work, it fails to connect (and it is only 2m away from my router), it continues to ask me for the password, which has was not changed in the meantime. I tried nmtui But nothing change, well I only got the funny message I also tried to fix it by looking into armbian-config but nothing, after the third time, I get the same message about "secrets" not being given. I also tried installing "non-free" package, hoping it would find missing piece of software/firmware/driver to solve my issue, but as you can immagine it doesn't. And I also found out the "browser" can't be opened, as it gives me some kind of Input/output errors, yet if I scroll down to the internet program section, I can open firefox, and it seems (only used it for 1h, more or less) to be working properly. Would some good soul help me find a solution?? As soon as I'm able to send some screenshots i'll do it. Thanks in advance, fr3d
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines