chenjun_wh
-
Posts
10 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by chenjun_wh
-
-
I update my box from X96Air_P3_20191220-2048 to X96Air_P3_20200619-2008,4G&64G,1G wired network.(Android os is 1000m wired network)
I use Armbian_20.08.0_Aml-64_bionic_current_5.7.0-rc7_desktop_20200531.img.xz,boot from tf. no u-boot.ext file.
I try this dtb files:
g12a_u212_4g.dtb, boot failure
meson-g12a-sei510.dtb, armbian boot ok,wired network failure
meson-g12a-x96-max.dtb,armbian boot ok, 100m wired network ok
meson-g12a-x96-max-rmii.dtb,armbian boot ok,wired network failure
meson-g12a-x96-max-no-cvbs.dtb,armbian boot ok, 100m wired network ok
meson-g12b-odroid-n2.dtb, boot failure
meson-sm1-sei610.dtb,armbian boot,ok,wired network failuremeson-sm1-sei610-2.dtb,armbian boot ok, 100m wired network ok
meson-sm1-sei610-ethfix.dtb,armbian boot ok,wired network failure
meson-sm1-x96-max-plus.dtb, armbian boot ok,100m wired network ok
meson-sm1-x96-max-plus-ne.dtb,armbian boot ok,wired network failure
meson-sm1-x96-max-plus-100m.dtb, armbian boot ok, 100m wired network ok
sm1_ac213_4g.dtb, boot failureall dtb 1000m wired network failure.
I use: sudo ethtool –s eth0 speed 100 duplex full autoneg on.ping is ok.
if i use sudo ethtool –s eth0 speed 1000 duplex full autoneg on. 1000m wired network failure. ping is lost, but wired line is ok.
when i cp u-boot.sd to u-boot.ext, armbian boot failure. i only boot from tf or usb.
chenjun@X96Air_P3:~$ ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 100baseT/Full
Link partner advertised pause frame use: Symmetric
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Cannot get wake-on-lan settings: Operation not permitted
Current message level: 0x0000003f (63)
drv probe link timer ifdown ifup
Link detected: yes
chenjun@arm-64:~$ ethtool -i eth0
driver: st_gmac
version: Jan_2016
firmware-version:
expansion-rom-version:
bus-info:
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: nochenjun@X96Air_P3:~$ dmesg|grep eth0
[ 12.077051] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=29)
[ 12.094384] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
[ 12.094420] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
[ 12.094450] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
[ 13.700142] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 13.700301] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 52.868317] eth0: renamed from veth97ff6f4
How to fix X96Air_P3_20200619-2008 work 1000m wired network in armbian.
I do not know how to fix dtb or dts files.
https://www.cnblogs.com/helloworldtoyou/p/5406913.html
chinese fix 1000m network.
-
-
48 minutes ago, Armin said:
Hello,
When you wrote " wired network 100m ok", that means you have fixed the speed to 100M with ethtool command or this is already fixed into the dtb file itself ?
What's exactly your question ? Do you search a dtb file able to have ethernet connection to 1000M ?
I type this
ethtool -s eth0 speed 100 duplex full autoneg on .
the wired network is ok.
I type this
ethtool -s eth0 speed 1000 duplex full autoneg on .
the wired network is failure.
I do not know how to fix dtb file.or change another dtb.
I hope my box X96Air_P3_20200619-2008.4G/64G in 1000m wired network
-
I update my box from X96Air_P3_20191220-2048 to X96Air_P3_20200619-2008.
I try this dtb files:
g12a_u212_4g.dtb, boot failure .
meson-g12a-sei510.dtb, boot ok,wired network failure .
meson-g12a-x96-max.dtb, boot ok, wired network 100m ok .
meson-g12a-x96-max-rmii.dtb, boot ok,wired network failure .
meson-g12a-x96-max-no-cvbs.dtb, boot ok, wired network 100m ok .
meson-g12b-odroid-n2.dtb, boot failure .
meson-sm1-sei610.dtb boot, ok,wired network failure .
meson-sm1-sei610-ethfix.dtb, boot ok,wired network failure .
meson-sm1-x96-max-plus.dtb, boot ok, wired network 100m ok .
meson-sm1-x96-max-plus-ne.dtb, boot ok,wired network failure .
meson-sm1-x96-max-plus-100m.dtb, boot ok, wired network 100m ok.
sm1_ac213_4g.dtb, boot failure .
how to use wired network in 1000m?
-
On 6/26/2020 at 5:42 PM, Armin said:
And what's the boot result for each one ?
some boot result ok.but wired network not work.
some boot result fail.
I do not record.
-
On 6/24/2020 at 2:56 AM, Armin said:
Did you force the parameter to 100M ?
Anyway, 1000M is not working (address IP issue if I'm remerber well) on this box !
Into meson-sm1-sei610-ethfix.dtb, the speed parameter is fixed to 100M !
I try 7 files.like this
meson-sm1-sei610
meson-sm1-sei610-ethfix
meson-g12a-sei510
meson-g12a-x96-max
meson-g12a-x96-max-no-cvbs
meson-g12a-x96-max-rmii
meson-g12b-odroid-n2only use meson-g12a-x96-mac-no-cvbs .in ny box X96Air_P3.the 100m full wired network is ok.
I do this command
ethtool -s eth0 speed 100 duplex full autoneg on .
after reboot . the eth0 is down.I must use command again.
net line another pc or route is 100m full.also ok
-
I fix wired network.
My tv box is X96Air_P3_20191220-2048.4G+64G.
I use
armbian-20.08.0-aml-64-bionic-current-5.7.0-rc7-desktop-20200521
and
meson-g12a-x96-max-no-cvbs.dtb
boot from sd
the wired network is ok.but only 100m full.and color is not good.
How to fix it.I want to use 1000mb full.
-
My box tv is X96Air P3 4G+64G。
I user Armbian_20.02.0-rc.037_Aml-s9xxx_buster_current_5.5.0-rc6_desktop_20200205.img
and
mesin-sm1-sei610-ethfix.dtb.
I can not user eth0.and the network is not work.
Every body user P2 or P3?
x96 Air specifics only
in General Chat
Posted
who can use chroot Armbian_20.07_Arm-64_bionic_current_5.7.7.img to use armbian