[Monitoring your system health with HTOP (big.LITTLE)]

Working on it.

[Monitoring your system health with HTOP (big.LITTLE)]

All I'm saying is that it worked without root privileges until recently. No worries, not a biggie, obviously.

[Monitoring your system health with HTOP (big.LITTLE)]

Hello, I've noticed that with the last updates, this cpu frequency has stopped showing.

Edit: works if do sudo htop

[minimize maximize and close buttons missing]

Please forgive if this been posted before, I've done a search and found nothing.

I'm running xfce desktop and as stated, window control buttons are missing from top right of windows.. I set up a temporary additional user, same on that one. Window configuration is correct.

[Audio hardware not recognized with Odroid N2 kernel 5.4]

Not knowing it was a general N2 sound card/kernel issue, I just searched for vlc dummy output problems and found nothing on this forum. I'll try harder in future. 😳🤔🥴🆗😅

[Audio hardware not recognized with Odroid N2 kernel 5.4]

I was only posting my system information. Problem with that?

[Audio hardware not recognized with Odroid N2 kernel 5.4]

Forgot to mention, kernal.

5.8.10-meson64 #20.08.3 SMP PREEMPT Fri Sep 18 11:40:58 CEST 2020 aarch64 aarch64 aarch64 GNU/Linux

[Audio hardware not recognized with Odroid N2 kernel 5.4]

As the title says. On vlc only 'dummy' output is shown, no sound output.

I've had a search through the forums and can't find anything relevant.

Running Armbian focal on N2+.

Help much appreciated.

Thanks.

[tvheadend on Odroid N2 with Hauppauge WinTV-dualDD]

Ok, finally fixed. It WAS missing firmware.  Sorry, again for the duplicate posts. Thanks for all the assistance.

[tvheadend on Odroid N2 with Hauppauge WinTV-dualDD]

4.3, as stated,. dongle failed on w-scan also. W-scan scans the entire DVB frequency range.

[tvheadend on Odroid N2 with Hauppauge WinTV-dualDD]

Yes, I'm aware of this, thanks. Unfortunately, I don't possess a windoze machine. Having to borrow one. Everyone I know runs Linux of one flavour or another.

[tvheadend on Odroid N2 with Hauppauge WinTV-dualDD]

Ok, my apologies for the duplicate posts. I've built tvheadend in Buster, it 'sees' the dongle but doesn't find any channels. I've run w_scan, again, card detected but no channels. To me, looks like the dongle is faulty. Progressing replacement.

[tvheadend on Odroid N2 with Hauppauge WinTV-dualDD]

Hello, I'm tearing my hair out. Help would be much appreciated. Initially, I installed Armbian on an SD card and successfully installed tvheadend and got the tuner to scan successfully. Great, or so I thought. Time to build my 'real' system on a eMMC. After many repeated builds, I cannot, for the life of me, get a successful scan.  I'm using the 'predefined' network (UK Sutton Coldfield) which worked just fine before. I am running Armbian_20.08.1_Odroidn2_focal_current_5.8.5_desktop

[tvheadend on Odroid N2 with Hauppauge WinTV-dualDD]

Hello, I'm tearing my hair out. Help would be much appreciated. Initially, I installed Armbian on an SD card and successfully installed tvheadend and got the tuner to scan successfully. Great, or so I thought. Time to build my 'real' system on a eMMC. After many repeated builds, I cannot, for the life of me, get a successful scan.  I'm using the 'predefined' network (UK Sutton Coldfield) which worked just fine before. I am running Armbian_20.08.1_Odroidn2_focal_current_5.8.5_desktop.

Edit (can only post one per day).

JMMC, what did I do different? Probably the order of things. I initially tried to install tvheadend via armbian-config, it didn't do anything. I installed from the repository. Did I do an 'update & upgrade' before that? Can't remember. Did I do an install firmware, full or part (from armbian-config) before or after? You see my point? Many combinations and permutations, tried a few but loosing track. I'll gladly accept your buster option. Thanks.