[Single Armbian image for RK + AML + AW (aarch64 ARMv8)]

On 10/11/2020 at 10:06 PM, bb27k said:

On UART the VEGA s95 is stuck on a loop with "EMMC:0;READ:0;CHK:17A;SD:0;READ:0;CHK:F3;USB:8"

If I restart with the SDcard, same thing and I must use Usb-burning-tool to restore the S905

Ok, the problem was a too old firmware version use with USB Burning tool.

Now with the properly version I don't have any boot loop but the tronsmart stuck at "Starting application at 0x01000000" when I try to boot from the emmc.

[Single Armbian image for RK + AML + AW (aarch64 ARMv8)]

Hello, I just install Armbian_20.10_Arm-64_bullseye_current_5.9.0-rc8.img on my Vega S95 pro.

Everything works fine, but when I tried to install on the emmc I get Blank screen and no boot.
On UART the VEGA s95 is stuck on a loop with "EMMC:0;READ:0;CHK:17A;SD:0;READ:0;CHK:F3;USB:8"

If I restart with the SDcard, same thing and I must use Usb-burning-tool to restore the S905

 

I use the meson-gxbb-vega-s95-pro dtb file.
I tried install-aml and install-aml-s905 but each time I got the same result.
I tried different Sdcard with the same result.

Thanks for your help.