[CSC Armbian for RK322x TV box boards]

On 1/14/2021 at 12:03 PM, JVMS said:

I tried the way you said, the yellow LED is blinking . tried on two different monitors and different cables and nothing, no signal

new information about my boxform rkflashtool:

FIRMWARE_VER:7.0.0
MACHINE_MODEL: hx322x_box
MACHINE_ID:007
MANUFACTURER:RK30SDK
MAGIC: 0x5041524B
ATAG: 0x60000800
MACHINE: 3228
CHECK_MASK: 0x80
KERNEL_IMG: 0x60408000
#RECOVER_KEY: 1,1,0,20,0
CMDLINE:console=ttyFIQ0 androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts
=rk29xxnand:0x00002000@0x00002000(uboot),0x00004000@0x00004000(trust),0x00002000@0x00008000(misc),0x00000800@0x0000A000(baseparamer),
0x00007800@0x0000A800(resource),0x00006000@0x00012000(kernel),0x00006000@0x00018000(boot),0x00010000@0x0001E000(recovery),0x00020000@
0x0002E000(backup),0x00040000@0x0004E000(cache),0x00008000@0x0008E000(metadata),0x00002000@0x00096000(kpanic),0x00260000@0x00098000(s
ystem),-@0x002F8000(userdata)

 

[CSC Armbian for RK322x TV box boards]

20 hours ago, jock said:

The orange led flashing is indicating the Multitool booted and is waiting for you input. You may try to unplug and replug HDMI cable while the led is flashing. Some people reported it worked.

Otherwise the causes may be too many, including an unsupported TV/monitor due to some HDMI clock issues. HDMI clocks are a moving target and issues always arise with some uncommon or untested TVs.

 

Try with another HDMI device too, or even an image with the mainline kernel, can't tell anything more without dmesg logs and other details.

 

I tried the way you said, the yellow LED is blinking . tried on two different monitors and different cables and nothing, no signal

[CSC Armbian for RK322x TV box boards]

On 1/12/2021 at 4:50 AM, jock said:

@JVMS Thanks for the photos of the board. Do you have any problem or is it working fine?

Everything should be supported out of the box, but leds may have a different wiring from the common chiptrip/r329q setups. In that case, the original DTB file that comes from the stock android is very helpful

 

On 1/12/2021 at 4:50 AM, jock said:

@JVMS Thanks for the photos of the board. Do you have any problem or is it working fine?

Everything should be supported out of the box, but leds may have a different wiring from the common chiptrip/r329q setups. In that case, the original DTB file that comes from the stock android is very helpful

@jockas i said i am not able to boot with the armbian RK322X distro for ubuntu and debian, it is only with the red led on, the multitool is with the orange led flashing, and in both cases there is no video signal

[CSC Armbian for RK322x TV box boards]

Good Morning, I have a tv box model r29-5g-v1.2-221, I tried both the distribution of the armbian for the rk322x and the Multitool, and configuring the normal distribution with the dtb rk322x is only the red led on and using the multitool is the flashing orange led. the network card is the sv6256p and the memory is the TYDOGH221644RC 8G + 1g the chip is the rk3229