desperex

And what about USB ports support? Did anyone try to port collabora's patch for rock5b? https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux/-/commit/2c84ba3b660e93c67a02368b278641571945e9bb

Lowering emmc max frequency to 150M did the trick. I've checked eMMC DTS sections on legacy and collabora and they are the same. Does that mean the chip is bad?

Using this board with Armbian_23.08.0-trunk_Nanopct6_jammy_collabora_6.5.0-rc1.img built with Armbian build, everything's ok when running from SD card, but after copying stuff to eMMC with armbian-installer and running from eMMC I get things broken: - getting lots of IO errors like this in dmesg: I/O error, dev mmcblk0, sector 344488960 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Also I've noticed that the disks structure is quite different on SD and eMMC, so eMMC has extra devices: - mmcblk0boot0 - mmcblk0boot1 and there's nothing like this on SD Please bring on some light how to fix this. dmesg..txt

Just successfully built Armbian_23.08.0-trunk_Orangepi5-plus_jammy_legacy_5.10.160.img with server profile, booted from SD, copied to eMMC and it works fine. Next step would be fixing pcie errors as I want to use LSI controller instead of NVME disk. Looks like we'll have to stick with 5.10 for a while as mainline support is still quite partial - https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3588/-/blob/main/mainline-status.md Here are my boot errors just for reference: Jun 11 16:48:11 orangepi5-plus kernel: fiq_debugger fiq_debugger.0: IRQ fiq not found Jun 11 16:48:11 orangepi5-plus kernel: fiq_debugger fiq_debugger.0: IRQ wakeup not found Jun 11 16:48:11 orangepi5-plus kernel: fiq_debugger_probe: could not install nmi irq handler Jun 11 16:48:11 orangepi5-plus kernel: debugfs: Directory 'vcc_mipicsi1' with parent 'regulator' already present! Jun 11 16:48:11 orangepi5-plus kernel: debugfs: Directory 'vcc_mipicsi1' with parent 'vcc_mipicsi1' already present! Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe190000.pcie: IRQ msi not found Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe190000.pcie: Missing *config* reg space Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe180000.pcie: IRQ msi not found Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe190000.pcie: Missing *config* reg space Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe180000.pcie: Missing *config* reg space Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe190000.pcie: invalid resource Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe180000.pcie: Missing *config* reg space Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe180000.pcie: invalid resource Jun 11 16:48:11 orangepi5-plus kernel: mpp-iep2 fdbb0000.iep: allocate roi buffer failed Jun 11 16:48:11 orangepi5-plus kernel: mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found! Jun 11 16:48:11 orangepi5-plus kernel: rkvdec2_init:1022: No niu aclk reset resource define Jun 11 16:48:11 orangepi5-plus kernel: mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found! Jun 11 16:48:11 orangepi5-plus kernel: rkvdec2_init:1025: No niu hclk reset resource define Jun 11 16:48:11 orangepi5-plus kernel: mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found! Jun 11 16:48:11 orangepi5-plus kernel: rkvdec2_init:1022: No niu aclk reset resource define Jun 11 16:48:11 orangepi5-plus kernel: mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found! Jun 11 16:48:11 orangepi5-plus kernel: rkvdec2_init:1025: No niu hclk reset resource define Jun 11 16:48:11 orangepi5-plus kernel: mpp_rkvenc2 fdbd0000.rkvenc-core: dev_pm_opp_set_regulators: no regulator (venc) found: -19 Jun 11 16:48:11 orangepi5-plus kernel: rkvenc_init:1814: failed to add venc devfreq Jun 11 16:48:11 orangepi5-plus kernel: mpp_rkvenc2 fdbe0000.rkvenc-core: dev_pm_opp_set_regulators: no regulator (venc) found: -19 Jun 11 16:48:11 orangepi5-plus kernel: rkvenc_init:1814: failed to add venc devfreq Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe150000.pcie: IRQ msi not found Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe150000.pcie: Missing *config* reg space Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe150000.pcie: Missing *config* reg space Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe150000.pcie: invalid resource Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe170000.pcie: IRQ msi not found Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe170000.pcie: Missing *config* reg space Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe170000.pcie: Missing *config* reg space Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe170000.pcie: invalid resource Jun 11 16:48:11 orangepi5-plus kernel: rk806 spi2.0: no sleep-setting state Jun 11 16:48:11 orangepi5-plus kernel: rk806 spi2.0: no reset-setting pinctrl state Jun 11 16:48:11 orangepi5-plus kernel: rk806 spi2.0: no dvs-setting pinctrl state Jun 11 16:48:11 orangepi5-plus kernel: Error: Driver 'Goodix-TS' is already registered, aborting... Jun 11 16:48:11 orangepi5-plus kernel: .. rk pwm remotectl v2.0 init Jun 11 16:48:11 orangepi5-plus kernel: Goodix-TS 7-0014: i2c test failed attempt 1: -6 Jun 11 16:48:11 orangepi5-plus kernel: Goodix-TS 7-0014: i2c test failed attempt 2: -6 Jun 11 16:48:11 orangepi5-plus kernel: Goodix-TS 7-0014: I2C communication failure: -6 Jun 11 16:48:11 orangepi5-plus kernel: arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active. Jun 11 16:48:11 orangepi5-plus kernel: debugfs: File 'Capture' in directory 'dapm' already present! Jun 11 16:48:11 orangepi5-plus kernel: ES8323 7-0011: ASoC: error at soc_component_write_no_lock on ES8323.7-0011: -5 Jun 11 16:48:11 orangepi5-plus kernel: debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present! Jun 11 16:48:11 orangepi5-plus kernel: rockchip-dmc dmc: failed to get vop bandwidth to dmc rate Jun 11 16:48:11 orangepi5-plus kernel: rockchip-dmc dmc: failed to get vop pn to msch rl Jun 11 16:48:11 orangepi5-plus kernel: rockchip-dmc dmc: could not find power_model node Jun 11 16:48:11 orangepi5-plus kernel: RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff] Jun 11 16:48:11 orangepi5-plus kernel: RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff] Jun 11 16:48:11 orangepi5-plus kernel: RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff] Jun 11 16:48:11 orangepi5-plus kernel: debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present! Jun 11 16:48:11 orangepi5-plus kernel: RKNPU fdab0000.npu: failed to find power_model node Jun 11 16:48:11 orangepi5-plus kernel: RKNPU fdab0000.npu: RKNPU: failed to initialize power model Jun 11 16:48:11 orangepi5-plus kernel: RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe150000.pcie: PCIe Link Fail Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe150000.pcie: failed to initialize host Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe170000.pcie: PCIe Link Fail Jun 11 16:48:11 orangepi5-plus kernel: rk-pcie fe170000.pcie: failed to initialize host Jun 11 16:48:11 orangepi5-plus systemd-tmpfiles[721]: Setting file flags is only supported on regular files and directories, cannot set on '/var/log/journal'.

@SteeManthanks for the info! I just wonder what LTS in board's name means in that case!

So it's 100% not HW/chip (CDW.20U5622-00) related? How these things are usually fixed? Are you (Armbian team/maintaner) in contact with CDTech (manufacturer) to get a fixed driver from them? Or are we just supposed to wait for the fix (if it ever happens) to be included in vendor's kernel (Xunlong) and then to be ported to Armbian as a patch? Thanks!

So I see you found the same solution, but the other way around=) The simplest patch would be another overlay, so you can optionally switch this on if you have issues with pcie device: /linux-source-rockchip64/arch/arm64/boot/dts/rockchip/overlay/rockchip-rk3399-bus-scan-delay.dts /dts-v1/; /plugin/; / { compatible = "rockchip,rk3399"; fragment@0 { target = <&pcie0>; __overlay__ { bus-scan-delay-ms = <1000>; }; }; };

@koftikesI guess I found the solution, at least for me, try it. My config, just for reference: - Armbian 23.02.0-trunk Jammy with bleeding edge Linux 6.1.1-rockchip64, though this would work with any kernel - Booting from eMMC, no SDcard - NVMe (Crucial P2) is used as an extra logical partition (not system) The root cause in my case is zero pcie bus scan delay, I used to have manjaro on this SBC and they had a patch to address this issue, but they do not make any new releases for rockpi4b because of some kind of emmc boot issue, so I'd stick with armbian for now Steps to fix this issue: 1. Download your kernel source code. It can be done with 'sudo armbian-config' and going to Software->Source_install 2. Patch pcie-gen2 overlay (the simplest way to make the fix), replace 6.1.1 with your kernel version: cd /usr/src/linux-source-6.1.1-rockchip64/ sudo cp ../linux-headers-6.1.1-rockchip64/Module.symvers . make oldconfig # it copies .config to ./ sudo nano /usr/src/linux-source-6.1.1-rockchip64/arch/arm64/boot/dts/rockchip/overlay/rockchip-pcie-gen2.dts Make changes to DTS file so it looks like this, key thing here is bus-scan-delay-ms set to 1000ms, you can try to set it to a greater value in case 1000 doesn't work for you: /dts-v1/; /plugin/; / { compatible = "rockchip,rk3399"; fragment@0 { target = <&pcie0>; __overlay__ { max-link-speed = <2>; bus-scan-delay-ms = <1000>; }; }; }; 3. Compile DTS and copy DTBO file to boot partition : cd /usr/src/linux-source-6.1.1-rockchip64/ sudo make -j4 dtbs sudo cp -rf /usr/src/linux-source-6.1.1-rockchip64/arch/arm64/boot/dts/rockchip/overlay/rockchip-pcie-gen2.dtbo /boot/dtb/rockchip/overlay/ sudo cp -rf /usr/src/linux-source-6.1.1-rockchip64/arch/arm64/boot/dts/rockchip/overlay/rockchip-pcie-gen2.dtbo /boot/dtb-6.1.1-rockchip64/rockchip/overlay/ 4. Reboot 5. Profit!

Switching to 6.0.10 kernel via armbian-config didn't help. EDIT: Just built 6.1.1 mainline kernel and installed it, and it won't soft reboot either - "Kernel panic - not syncing: Asynchronous SError Interrupt" So again, it boots ok for the first time (when powering on), it fails booting on soft reboot only. Attaching serial console output kernel_6.0.10_output kernel_6.1.1_output

Hi! Got the same issue with same kernel, but I'm getting boot issues on soft reboot ONLY (power off/power on always boots for me). Booting from eMMC, got a NVMe drive. Here is my log after soft rebooting: $ sudo reboot [ 237.086162] watchdog: watchdog0: watchdog did not stop! [ 238.600532] reboot: Restarting system DDR Version 1.20 20190314 In soft reset SRX channel 0 CS = 0 MR0=0x19 MR4=0x3 MR5=0x6 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0xFF channel 1 CS = 0 MR0=0x19 MR4=0x3 MR5=0x6 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0xFF channel 0 training pass! channel 1 training pass! change freq to 400MHz 0,1 channel 0 CS = 0 MR0=0x19 MR4=0x3 MR5=0x6 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0xFF channel 1 CS = 0 MR0=0x19 MR4=0x3 MR5=0x6 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0xFF channel 0 training pass! channel 1 training pass! change freq to 800MHz 1,0 Channel 0: LPDDR4,800MHz Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,800MHz Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB 256B stride ch 0 ddrconfig = 0x101, ddrsize = 0x40 ch 1 ddrconfig = 0x101, ddrsize = 0x40 pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD OUT Boot1 Release Time: May 29 2020 17:36:36, version: 1.26 CPUId = 0x0 ChipType = 0x10, 436 SdmmcInit=2 0 BootCapSize=100000 UserCapSize=59000MB FwPartOffset=2000 , 100000 mmc0:cmd8,20 mmc0:cmd5,20 mmc0:cmd55,20 mmc0:cmd1,20 mmc0:cmd8,20 mmc0:cmd5,20 mmc0:cmd55,20 mmc0:cmd1,20 mmc0:cmd8,20 mmc0:cmd5,20 mmc0:cmd55,20 mmc0:cmd1,20 SdmmcInit=0 1 StorageInit ok = 68932 SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit read PBA: 0x1404 SecureInit read PBA: 0x1804 SecureInit read PBA: 0x1c04 SecureInit ret = 0, SecureMode = 0 atags_set_bootdev: ret:(0) GPT part: 0, name: loader1, start:0x40, size:0x1f40 GPT part: 1, name: loader2, start:0x4000, size:0x2000 GPT part: 2, name: trust, start:0x6000, size:0x2000 GPT part: 3, name: boot, start:0x8000, size:0x100000 GPT part: 4, name: rootfs, start:0x108000, size:0x7233860 no find partition:uboot. Trust Addr:0x4000, 0x58334c42 No find bl30.bin No find bl32.bin Load uboot, ReadLba = 2000 Load OK, addr=0x200000, size=0xdc6f0 RunBL31 0x40000 @ 101881 us NOTICE: BL31: v1.3(release):845ee93 NOTICE: BL31: Built : 15:51:11, Jul 22 2020 NOTICE: BL31: Rockchip release version: v1.1 INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: If lpddr4 need support multi frequency, INFO: please update loader! INFO: Current ctl index[0] freq=400MHz INFO: Current ctl index[1] freq=800MHz INFO: plat_rockchip_pmu_init(1196): pd status 3e INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2022.07-armbian (Nov 30 2022 - 10:46:43 +0000) SoC: Rockchip rk3399 Reset cause: RST Model: Radxa ROCK Pi 4B DRAM: 3.9 GiB PMIC: RK808 Core: 285 devices, 31 uclasses, devicetree: separate MMC: mmc@fe310000: 2, mmc@fe320000: 1, mmc@fe330000: 0 Loading Environment from SPIFlash... SF: Detected XT25F32B with page size 256 Bytes, erase size 4 KiB, total 4 MiB *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Model: Radxa ROCK Pi 4B Net: eth0: ethernet@fe300000 Hit any key to stop autoboot: 0 starting USB... Bus usb@fe380000: ehci_generic usb@fe380000: Failed to get clocks (ret=-19) Port not available. Bus usb@fe3c0000: ehci_generic usb@fe3c0000: Failed to get clocks (ret=-19) Port not available. Bus usb@fe800000: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 Bus usb@fe900000: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe800000 for devices... 1 USB Device(s) found scanning bus usb@fe900000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Device 0: unknown device Card did not respond to voltage select! : -110 switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3252 bytes read in 19 ms (167 KiB/s) ## Executing script at 00500000 Boot script loaded from mmc 0 204 bytes read in 15 ms (12.7 KiB/s) 22787516 bytes read in 2179 ms (10 MiB/s) 30607872 bytes read in 2920 ms (10 MiB/s) 76139 bytes read in 46 ms (1.6 MiB/s) 2698 bytes read in 34 ms (77.1 KiB/s) Applying kernel provided DT fixup script (rockchip-fixup.scr) ## Executing script at 09000000 Unknown command 'kaslrseed' - try 'help' Moving Image from 0x2080000 to 0x2200000, end=3fd0000 ## Loading init Ramdisk from Legacy Image at 06000000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 22787452 Bytes = 21.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Ramdisk to f0950000, end f1f0b57c ... OK Loading Device Tree to 00000000f08d5000, end 00000000f094ffff ... OK Starting kernel ... efi_free_pool: illegal free 0x00000000f0f0d040 efi_free_pool: illegal 00000f0f0a040 [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.15.80-rockchip64 (root@746a5325a2a9) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #22.11.1 SMP PREEMPT Wed Nov 30 11:12:47 UTC 2022 [ 0.000000] Machine model: Radxa ROCK Pi 4B [ 0.000000] efi: UEFI not found. [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xf77d6100-0xf77d7fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] cma: Reserved 128 MiB at 0x00000000e8800000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 29 pages/cpu s80984 r8192 d29608 u118784 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=UUID=86029bc2-ee89-4d51-a8f2-0ffcad13472f rootwait rootfstype=ext4 splash plymouth.ignore-serial-consoles console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=7 ubootpart=7ff3d104-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 [ 0.000000] Unknown kernel command line parameters "splash ubootpart=7ff3d104-01 cgroup_enable=memory cgroup_memory=1", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 3798564K/4061184K available (16000K kernel code, 2690K rwdata, 6696K rodata, 4352K init, 593K bss, 131548K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000 [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff] [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @500000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x00000000004d0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000004e0000 [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001982] Console: colour dummy device 80x25 [ 0.003067] printk: console [tty1] enabled [ 0.003201] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.003250] pid_max: default: 32768 minimum: 301 [ 0.003401] LSM: Security Framework initializing [ 0.003458] Yama: becoming mindful. [ 0.003661] AppArmor: AppArmor initialized [ 0.003828] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.003887] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.008098] rcu: Hierarchical SRCU implementation. [ 0.009718] Platform MSI: interrupt-controller@fee20000 domain created [ 0.010263] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created [ 0.012494] EFI services will not be available. [ 0.013319] smp: Bringing up secondary CPUs ... [ 0.014424] Detected VIPT I-cache on CPU1 [ 0.014474] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000 [ 0.014497] GICv3: CPU1: using allocated LPI pending table @0x00000000004f0000 [ 0.014567] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.015791] Detected VIPT I-cache on CPU2 [ 0.015831] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000 [ 0.015850] GICv3: CPU2: using allocated LPI pending table @0x0000000000580000 [ 0.015899] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.017144] Detected VIPT I-cache on CPU3 [ 0.017183] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000 [ 0.017203] GICv3: CPU3: using allocated LPI pending table @0x0000000000590000 [ 0.017248] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.018396] CPU features: detected: Spectre-v2 [ 0.018409] CPU features: detected: Spectre-v3a [ 0.018415] CPU features: detected: Spectre-v4 [ 0.018421] CPU features: detected: Spectre-BHB [ 0.018429] CPU features: detected: ARM erratum 1742098 [ 0.018436] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.018442] Detected PIPT I-cache on CPU4 [ 0.018479] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000 [ 0.018497] GICv3: CPU4: using allocated LPI pending table @0x00000000005a0000 [ 0.018543] CPU4: Booted secondary processor 0x0000000100 [0x410fd082] [ 0.019692] Detected PIPT I-cache on CPU5 [ 0.019725] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000 [ 0.019743] GICv3: CPU5: using allocated LPI pending table @0x00000000005b0000 [ 0.019781] CPU5: Booted secondary processor 0x0000000101 [0x410fd082] [ 0.019944] smp: Brought up 1 node, 6 CPUs [ 0.020434] SMP: Total of 6 processors activated. [ 0.020458] CPU features: detected: 32-bit EL0 Support [ 0.020479] CPU features: detected: 32-bit EL1 Support [ 0.020504] CPU features: detected: CRC32 instructions [ 0.047130] CPU: All CPU(s) started at EL2 [ 0.047259] alternatives: patching kernel code [ 0.050432] devtmpfs: initialized [ 0.064798] Registered cp15_barrier emulation handler [ 0.064842] Registered setend emulation handler [ 0.064864] KASLR disabled due to lack of seed [ 0.065085] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.065179] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.068216] pinctrl core: initialized pinctrl subsystem [ 0.068912] DMI not present or invalid. [ 0.069776] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.074430] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.076158] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.078970] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.079081] audit: initializing netlink subsys (disabled) [ 0.079353] audit: type=2000 audit(0.076:1): state=initialized audit_enabled=0 res=1 [ 0.080627] thermal_sys: Registered thermal governor 'fair_share' [ 0.080636] thermal_sys: Registered thermal governor 'bang_bang' [ 0.080657] thermal_sys: Registered thermal governor 'step_wise' [ 0.080672] thermal_sys: Registered thermal governor 'user_space' [ 0.081196] cpuidle: using governor menu [ 0.081530] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.081773] ASID allocator initialised with 65536 entries [ 0.082986] Serial: AMBA PL011 UART driver [ 0.110672] platform ff770000.syscon:phy@f780: Fixing up cyclic dependency with fe330000.mmc [ 0.118275] platform ff940000.hdmi: Fixing up cyclic dependency with ff8f0000.vop [ 0.118384] platform ff940000.hdmi: Fixing up cyclic dependency with ff900000.vop [ 0.129121] rockchip-gpio ff720000.gpio0: probed /pinctrl/gpio0@ff720000 [ 0.129970] rockchip-gpio ff730000.gpio1: probed /pinctrl/gpio1@ff730000 [ 0.130769] rockchip-gpio ff780000.gpio2: probed /pinctrl/gpio2@ff780000 [ 0.131617] rockchip-gpio ff788000.gpio3: probed /pinctrl/gpio3@ff788000 [ 0.132422] rockchip-gpio ff790000.gpio4: probed /pinctrl/gpio4@ff790000 [ 0.149838] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.149869] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.149888] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.149906] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.155271] cryptd: max_cpu_qlen set to 1000 [ 0.232889] raid6: neonx8 gen() 1667 MB/s [ 0.301051] raid6: neonx8 xor() 1204 MB/s [ 0.369221] raid6: neonx4 gen() 1719 MB/s [ 0.437378] raid6: neonx4 xor() 1240 MB/s [ 0.505546] raid6: neonx2 gen() 1532 MB/s [ 0.573702] raid6: neonx2 xor() 1148 MB/s [ 0.641870] raid6: neonx1 gen() 1200 MB/s [ 0.710035] raid6: neonx1 xor() 926 MB/s [ 0.778187] raid6: int64x8 gen() 1001 MB/s [ 0.846393] raid6: int64x8 xor() 577 MB/s [ 0.914519] raid6: int64x4 gen() 1002 MB/s [ 0.982677] raid6: int64x4 xor() 591 MB/s [ 1.050836] raid6: int64x2 gen() 943 MB/s [ 1.119005] raid6: int64x2 xor() 524 MB/s [ 1.187156] raid6: int64x1 gen() 723 MB/s [ 1.255316] raid6: int64x1 xor() 390 MB/s [ 1.255331] raid6: using algorithm neonx4 gen() 1719 MB/s [ 1.255347] raid6: .... xor() 1240 MB/s, rmw enabled [ 1.255361] raid6: using neon recovery algorithm [ 1.256976] vcc5v0_sys: supplied by vcc12v_dcin [ 1.257490] vcc3v3_pcie: supplied by vcc5v0_sys [ 1.257900] vcc3v3_sys: supplied by vcc5v0_sys [ 1.258353] vcc5v0_host: supplied by vcc5v0_sys [ 1.258797] vcc5v0_typec: supplied by vcc5v0_sys [ 1.259670] iommu: Default domain type: Translated [ 1.259690] iommu: DMA domain TLB invalidation policy: strict mode [ 1.262881] vgaarb: loaded [ 1.263378] SCSI subsystem initialized [ 1.264183] usbcore: registered new interface driver usbfs [ 1.264244] usbcore: registered new interface driver hub [ 1.264302] usbcore: registered new device driver usb [ 1.265039] pps_core: LinuxPPS API ver. 1 registered [ 1.265058] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.265089] PTP clock support registered [ 1.265399] EDAC MC: Ver: 3.0.0 [ 1.266721] NetLabel: Initializing [ 1.266741] NetLabel: domain hash size = 128 [ 1.266755] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.266837] NetLabel: unlabeled traffic allowed by default [ 1.267430] clocksource: Switched to clocksource arch_sys_counter [ 1.319340] VFS: Disk quotas dquot_6.6.0 [ 1.319477] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.320349] AppArmor: AppArmor Filesystem Enabled [ 1.331291] NET: Registered PF_INET protocol family [ 1.331681] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.334882] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.335091] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.335221] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.335794] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 1.336479] TCP: Hash tables configured (established 32768 bind 32768) [ 1.336687] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.336869] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.337226] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.337281] NET: Registered PF_XDP protocol family [ 1.337305] PCI: CLS 0 bytes, default 64 [ 1.338058] Trying to unpack rootfs image as initramfs... [ 1.338709] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 1.339241] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 1.339988] kvm [1]: IPA Size Limit: 40 bits [ 1.341311] kvm [1]: vgic-v2@fff20000 [ 1.341356] kvm [1]: GIC system register CPU interface enabled [ 1.341666] kvm [1]: vgic interrupt IRQ18 [ 1.342005] kvm [1]: Hyp mode initialized successfully [ 1.354460] Initialise system trusted keyrings [ 1.354549] Key type blacklist registered [ 1.354866] workingset: timestamp_bits=44 max_order=20 bucket_order=0 [ 1.361685] zbud: loaded [ 1.363534] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.364500] fuse: init (API version 7.34) [ 1.367276] integrity: Platform Keyring initialized [ 1.432734] xor: measuring software checksum speed [ 1.440941] 8regs : 1220 MB/sec [ 1.444351] 32regs : 2932 MB/sec [ 1.448666] arm64_neon : 2298 MB/sec [ 1.448684] xor: using function: 32regs (2932 MB/sec) [ 1.448706] Key type asymmetric registered [ 1.448720] Asymmetric key parser 'x509' registered [ 1.448858] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.449119] io scheduler mq-deadline registered [ 1.449139] io scheduler kyber registered [ 1.449365] io scheduler bfq registered [ 1.475684] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.475723] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 [ 1.477212] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.477241] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 1.482013] vdd_log: supplied by regulator-dummy [ 1.483622] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.487218] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 42, base_baud = 1500000) is a 16550A [ 1.487468] serial serial0: tty port ttyS0 registered [ 1.488499] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 43, base_baud = 1500000) is a 16550A [ 1.609480] printk: console [ttyS2] enabled [ 1.611271] Serial: AMBA driver [ 1.613575] rockchip-vop ff8f0000.vop: Adding to iommu group 2 [ 1.615071] rockchip-vop ff900000.vop: Adding to iommu group 3 [ 1.623944] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops) [ 1.624777] [drm] unsupported AFBC format[3231564e] [ 1.627132] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops) [ 1.628815] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.639495] loop: module loaded [ 1.646014] tun: Universal TUN/TAP device driver, 1.6 [ 1.647744] thunder_xcv, ver 1.0 [ 1.648087] thunder_bgx, ver 1.0 [ 1.648429] nicpf, ver 1.0 [ 1.649763] e1000e: Intel(R) PRO/1000 Network Driver [ 1.650212] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.650790] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.651275] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.651829] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 1.652391] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.653210] sky2: driver version 1.30 [ 1.654260] VFIO - User Level meta-driver version: 0.3 [ 1.671065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.671706] ehci-pci: EHCI PCI platform driver [ 1.672153] ehci-platform: EHCI generic platform driver [ 1.675054] ehci-platform fe380000.usb: EHCI Host Controller [ 1.675606] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1 [ 1.676465] ehci-platform fe380000.usb: irq 35, io mem 0xfe380000 [ 1.691478] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 [ 1.692350] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.693098] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.693747] usb usb1: Product: EHCI Host Controller [ 1.694186] usb usb1: Manufacturer: Linux 5.15.80-rockchip64 ehci_hcd [ 1.694762] usb usb1: SerialNumber: fe380000.usb [ 1.695818] hub 1-0:1.0: USB hub found [ 1.696201] hub 1-0:1.0: 1 port detected [ 1.699380] ehci-platform fe3c0000.usb: EHCI Host Controller [ 1.699938] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2 [ 1.700787] ehci-platform fe3c0000.usb: irq 37, io mem 0xfe3c0000 [ 1.715467] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 [ 1.716300] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.717048] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.717695] usb usb2: Product: EHCI Host Controller [ 1.718135] usb usb2: Manufacturer: Linux 5.15.80-rockchip64 ehci_hcd [ 1.718711] usb usb2: SerialNumber: fe3c0000.usb [ 1.719906] hub 2-0:1.0: USB hub found [ 1.720372] hub 2-0:1.0: 1 port detected [ 1.721510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.722102] ohci-pci: OHCI PCI platform driver [ 1.722585] ohci-platform: OHCI generic platform driver [ 1.723409] ohci-platform fe3a0000.usb: Generic Platform OHCI controller [ 1.724059] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3 [ 1.724887] ohci-platform fe3a0000.usb: irq 36, io mem 0xfe3a0000 [ 1.787720] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 1.788473] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.789122] usb usb3: Product: Generic Platform OHCI controller [ 1.789653] usb usb3: Manufacturer: Linux 5.15.80-rockchip64 ohci_hcd [ 1.790230] usb usb3: SerialNumber: fe3a0000.usb [ 1.791213] hub 3-0:1.0: USB hub found [ 1.791616] hub 3-0:1.0: 1 port detected [ 1.792660] ohci-platform fe3e0000.usb: Generic Platform OHCI controller [ 1.793280] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4 [ 1.794111] ohci-platform fe3e0000.usb: irq 38, io mem 0xfe3e0000 [ 1.855676] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 1.856430] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.857078] usb usb4: Product: Generic Platform OHCI controller [ 1.857610] usb usb4: Manufacturer: Linux 5.15.80-rockchip64 ohci_hcd [ 1.858185] usb usb4: SerialNumber: fe3e0000.usb [ 1.859181] hub 4-0:1.0: USB hub found [ 1.859593] hub 4-0:1.0: 1 port detected [ 1.861538] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.862056] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5 [ 1.862919] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x8000000002010010 [ 1.863848] xhci-hcd xhci-hcd.0.auto: irq 77, io mem 0xfe800000 [ 1.864616] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.865119] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6 [ 1.865814] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 1.866602] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.867347] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.868155] usb usb5: Product: xHCI Host Controller [ 1.868600] usb usb5: Manufacturer: Linux 5.15.80-rockchip64 xhci-hcd [ 1.869176] usb usb5: SerialNumber: xhci-hcd.0.auto [ 1.870160] hub 5-0:1.0: USB hub found [ 1.870542] hub 5-0:1.0: 1 port detected [ 1.871353] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.872269] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.873014] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.873662] usb usb6: Product: xHCI Host Controller [ 1.874101] usb usb6: Manufacturer: Linux 5.15.80-rockchip64 xhci-hcd [ 1.874677] usb usb6: SerialNumber: xhci-hcd.0.auto [ 1.875682] hub 6-0:1.0: USB hub found [ 1.876064] hub 6-0:1.0: 1 port detected [ 1.877043] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.877555] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7 [ 1.878408] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x8000000002010010 [ 1.879305] xhci-hcd xhci-hcd.1.auto: irq 78, io mem 0xfe900000 [ 1.880105] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.880610] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8 [ 1.881305] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.882086] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.882831] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.883495] usb usb7: Product: xHCI Host Controller [ 1.883936] usb usb7: Manufacturer: Linux 5.15.80-rockchip64 xhci-hcd [ 1.884511] usb usb7: SerialNumber: xhci-hcd.1.auto [ 1.885508] hub 7-0:1.0: USB hub found [ 1.885888] hub 7-0:1.0: 1 port detected [ 1.886683] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.887579] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.888324] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.888969] usb usb8: Product: xHCI Host Controller [ 1.889409] usb usb8: Manufacturer: Linux 5.15.80-rockchip64 xhci-hcd [ 1.889985] usb usb8: SerialNumber: xhci-hcd.1.auto [ 1.890985] hub 8-0:1.0: USB hub found [ 1.891364] hub 8-0:1.0: 1 port detected [ 1.892444] usbcore: registered new interface driver usb-storage [ 1.895639] mousedev: PS/2 mouse device common for all mice [ 1.897567] i2c_dev: i2c /dev entries driver [ 1.898921] i2c 1-0011: Fixing up cyclic dependency with ff880000.i2s [ 1.903343] rk808 0-001b: chip id: 0x0 [ 1.907940] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 1.908529] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 1.909087] rk808-regulator rk808-regulator: max buck steps per change: 8 [ 1.910241] vdd_center: supplied by vcc5v0_sys [ 1.911452] vdd_cpu_l: supplied by vcc5v0_sys [ 1.912169] vcc_ddr: supplied by vcc5v0_sys [ 1.913143] vcc_1v8: supplied by vcc5v0_sys [ 1.914159] vcc1v8_codec: supplied by vcc5v0_sys [ 1.915752] vcc1v8_hdmi: supplied by vcc5v0_sys [ 1.917317] vcca_1v8: supplied by vcc5v0_sys [ 1.918867] vcc_sdio: supplied by vcc5v0_sys [ 1.920256] vcca3v0_codec: supplied by vcc5v0_sys [ 1.921819] vcc_1v5: supplied by vcc5v0_sys [ 1.923224] vcc0v9_hdmi: supplied by vcc5v0_sys [ 1.925074] vcc_3v0: supplied by vcc5v0_sys [ 1.926411] vcc_cam: supplied by vcc3v3_sys [ 1.927144] vcc_mipi: supplied by vcc3v3_sys [ 1.931483] rk808-rtc rk808-rtc: registered as rtc0 [ 1.932491] rk808-rtc rk808-rtc: setting system clock to 2022-12-22T16:41:53 UTC (1671727313) [ 1.934844] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! [ 1.935968] vdd_cpu_b: supplied by vcc5v0_sys [ 1.939160] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! [ 1.940556] vdd_gpu: supplied by vcc5v0_sys [ 1.947499] dw_wdt ff848000.watchdog: No valid TOPs array specified [ 1.950514] sdhci: Secure Digital Host Controller Interface driver [ 1.951079] sdhci: Copyright(c) Pierre Ossman [ 1.951539] Synopsys Designware Multimedia Card Interface Driver [ 1.953401] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.954196] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode. [ 1.954668] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode. [ 1.954891] dwmmc_rockchip fe310000.mmc: Using internal DMA controller. [ 1.955551] dwmmc_rockchip fe320000.mmc: Using internal DMA controller. [ 1.956131] dwmmc_rockchip fe310000.mmc: Version ID is 270a [ 1.956613] mmc1: CQHCI version 5.10 [ 1.956725] dwmmc_rockchip fe320000.mmc: Version ID is 270a [ 1.957398] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo [ 1.957663] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 33,32 bit host data width,256 deep fifo [ 1.957708] ledtrig-cpu: registered to indicate activity on CPUs [ 1.958543] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq [ 1.959018] hid: raw HID events driver (C) Jiri Kosina [ 1.959231] dwmmc_rockchip fe320000.mmc: Got CD GPIO [ 1.959796] mmc_host mmc2: card is non-removable. [ 1.960490] usbcore: registered new interface driver usbhid [ 1.962660] usbhid: USB HID core driver [ 1.968867] drop_monitor: Initializing network drop monitor service [ 1.970214] NET: Registered PF_INET6 protocol family [ 1.972331] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.974061] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.983056] mmc1: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA [ 2.081567] mmc1: Command Queue Engine enabled [ 2.082021] mmc1: new HS400 Enhanced strobe MMC card at address 0001 [ 2.083829] mmcblk1: mmc1:0001 SLD64G 57.6 GiB [ 2.084964] mmc_host mmc2: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0) [ 2.114829] mmcblk1: p1 [ 2.115977] mmcblk1boot0: mmc1:0001 SLD64G 4.00 MiB [ 2.119198] mmcblk1boot1: mmc1:0001 SLD64G 4.00 MiB [ 2.122252] mmcblk1rpmb: mmc1:0001 SLD64G 4.00 MiB, chardev (241:0) [ 2.407630] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 223 [ 2.411219] mmc2: new ultra high speed SDR104 SDIO card at address 0001 [ 2.967832] Freeing initrd memory: 22252K [ 3.016854] Segment Routing with IPv6 [ 3.017288] In-situ OAM (IOAM) with IPv6 [ 3.017760] NET: Registered PF_PACKET protocol family [ 3.018416] 8021q: 802.1Q VLAN Support v1.8 [ 3.018859] Key type dns_resolver registered [ 3.020988] registered taskstats version 1 [ 3.021383] Loading compiled-in X.509 certificates [ 3.025411] Loaded X.509 cert 'Build time autogenerated kernel key: 61795ddb143ee60eb525e7adfa85249853099ba1' [ 3.033108] zswap: loaded using pool zstd/z3fold [ 3.034543] Key type .fscrypt registered [ 3.034905] Key type fscrypt-provisioning registered [ 3.038460] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes [ 3.062461] Key type encrypted registered [ 3.062842] AppArmor: AppArmor sha1 policy hashing enabled [ 3.111821] vcc_0v9: supplied by vcc3v3_sys [ 3.113359] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ 3.114063] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000 [ 3.114853] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000 [ 3.116609] rockchip-pcie f8000000.pcie: no bus scan delay, default to 0 ms [ 3.160295] rockchip-pcie f8000000.pcie: wait 0 ms (from device tree) before bus scan [ 3.161498] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00 [ 3.162111] pci_bus 0000:00: root bus resource [bus 00-1f] [ 3.162620] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff] [ 3.163253] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff]) [ 3.164206] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400 [ 3.164938] pci 0000:00:00.0: supports D1 [ 3.165315] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 3.172878] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.173823] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 3.174511] Modules linked in: [ 3.174805] CPU: 3 PID: 223 Comm: kworker/u12:4 Not tainted 5.15.80-rockchip64 #22.11.1 [ 3.175535] Hardware name: Radxa ROCK Pi 4B (DT) [ 3.175960] Workqueue: events_unbound deferred_probe_work_func [ 3.176509] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 3.177147] pc : rockchip_pcie_rd_conf+0xb0/0x230 [ 3.177589] lr : rockchip_pcie_rd_conf+0xec/0x230 [ 3.178027] sp : ffff80000aa23830 [ 3.178334] x29: ffff80000aa23830 x28: 0000000000000000 x27: 0000000000000000 [ 3.178996] x26: 0000000000000000 x25: 0000000000000000 x24: ffff80000aa23974 [ 3.179658] x23: ffff000001a75800 x22: 0000000000000000 x21: 0000000000000004 [ 3.180319] x20: ffff80000aa238b4 x19: ffff80000c100000 x18: 0000000000000000 [ 3.180981] x17: 6572202c295d3030 x16: 2d3030207375625b x15: ffffffffffffffff [ 3.181643] x14: ffff80000954e228 x13: ffff000006120a1c x12: ffff000006120290 [ 3.182304] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000001001d87 [ 3.182965] x8 : 000000000000ea60 x7 : ffff80000aa23800 x6 : 0000000000000001 [ 3.183626] x5 : 0000000000000003 x4 : 0000000000000000 x3 : 0000000000c00008 [ 3.184287] x2 : 000000000080000a x1 : ffff80000fc00008 x0 : ffff80000fc0000c [ 3.184950] Call trace: [ 3.185180] rockchip_pcie_rd_conf+0xb0/0x230 [ 3.185590] pci_bus_read_config_dword+0x84/0xd8 [ 3.186023] pci_bus_generic_read_dev_vendor_id+0x34/0x1b0 [ 3.186532] pci_bus_read_dev_vendor_id+0x4c/0x70 [ 3.186973] pci_scan_single_device+0x84/0xd8 [ 3.187381] pci_scan_slot+0x38/0x120 [ 3.187727] pci_scan_child_bus_extend+0x58/0x330 [ 3.188167] pci_scan_bridge_extend+0x340/0x5a0 [ 3.188591] pci_scan_child_bus_extend+0x1fc/0x330 [ 3.189039] pci_scan_root_bus_bridge+0xd4/0xf0 [ 3.189465] pci_host_probe+0x18/0xb0 [ 3.189811] rockchip_pcie_probe+0x4a8/0x4c0 [ 3.190213] platform_probe+0x68/0xd8 [ 3.190560] really_probe+0xbc/0x428 [ 3.190897] __driver_probe_device+0x114/0x188 [ 3.191311] driver_probe_device+0xb0/0x110 [ 3.191701] __device_attach_driver+0xbc/0x158 [ 3.192115] bus_for_each_drv+0x7c/0xd0 [ 3.192480] __device_attach+0xec/0x1a8 [ 3.192839] device_initial_probe+0x14/0x20 [ 3.193229] bus_probe_device+0x9c/0xa8 [ 3.193588] deferred_probe_work_func+0x9c/0xf0 [ 3.194008] process_one_work+0x20c/0x4c8 [ 3.194389] worker_thread+0x208/0x478 [ 3.194743] kthread+0x138/0x150 [ 3.195051] ret_from_fork+0x10/0x20 [ 3.195398] Code: f94013f5 a8c37bfd d50323bf d65f03c0 (b9400273) [ 3.195955] ---[ end trace b920595b4649d435 ]--- [ 3.196380] note: kworker/u12:4[223] exited with preempt_count 1