Gabriel Zanetti

i was imagine that, but i don't know how to implement dfs in custom kernel, for now i using official debian provided by orange pi, with new kernel and all functions works fine, thanks for all help you guys.

@armbianorange2hero i some tests and with img in download page can works fine, but hdmi and wifi not, i try to compile my own img too, but haven't knowledge with linux. I tested img from orange pi (debian with new kernel) and all functions works fine

Hi, i have try but still HDMI not work, and i discovery the wifi doesn't work too, i put this board the side for while, i'm going to study more about this topic and try again later, very thx for you time and help

very thx for the help, i try the new kernel and i can bring up can0 interface, but, my board doesn't have hdmi output, and green led on board don't turn on, only red light is on, but by serial-usb i can configure every thing, i'm going study more about whats causes this, again, very thx for your help

i download in archive, i tried to use the new version, but the boards stuck in armbian boot img, i try again but use usb-serial to see any msg error on boot sequence

Hi Kat, sorry, i have a orangepi zero 2 running Armbian 22.02.0-trunk.0046 with kernel Linux 4.9.255-sun50iw9, usb to can board https://github.com/bigtreetech/U2C , i tried run modprobe comand and this is the return modprobe: FATAL: Module gs_usb not found in directory /lib/modules/4.9.255-sun50iw9 . I'm can install gs_usb without compile new build? i very new with linux. Thx for your help

i've try to use a board usb to can, but every topic i see about can and armbian is with spi to can. I very beginner with sbc and armbian. This is the firmware it's runningin board usb-can https://github.com/candle-usb/candleLight_fw