Thank you very much for the friendly replies. Sorry for the poor information.
Armbian 22.02.1
Kernel: Linux 4.9.255-sun50iw9
Board: Orange Pi Zero 2 Plus (H616)
I also tested it on Debian with xfce and MPV
Orangepizero2_3.0.0_debian_bullseye_desktop_xfce_linux5.16.17.7z
MPV gave the same result but without sound. My goal is to play the video via cvlc but if it only works with desktop, so it is. Unfortunately it did not work. ffplay did not work at all too.
Thank you very much for your help
Mike
Video Metadata:
Metadata:
major_brand : isom
minor_version : 512
compatible_brands: isomiso2avc1mp41
encoder : Lavf58.20.100
Duration: 00:00:44.77, start: 0.000000, bitrate: 4088 kb/s
Stream #0:0(eng): Video: h264 (High) (avc1 / 0x31637661), yuvj420p(pc), 1920x1080, 3949 kb/s, 59.94 fps, 59.94 tbr, 60k tbn, 119.88 tbc (default)
Metadata:
handler_name : VideoHandler
Stream #0:1(eng): Audio: aac (LC) (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 128 kb/s (default)
Metadata:
handler_name : SoundHandler
armbianmonitor -U (the upload failed with -u.. )
so here the output:
1
2 ### lsusb:
3
4 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
5 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
6 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
7 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
8 Bus 004 Device 002: ID 0603:00f2 Novatek Microelectronics Corp. Keyboard (Labtec Ultra Flat Keyboard)
9 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
10 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
11
12 /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M
13 /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M
14 /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M
15 |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
16 |__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
17 /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M
18 /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M
19 /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M
20
21 ### Userland:
22
23 PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
24
25 ### Installed packages:
26
27 ii armbian-bsp-cli-orangepizero2 22.02.1 arm64 Armbian board support files for orangepizero2
28 ii armbian-config 22.02.2 all Armbian configuration utility
29 ii armbian-firmware-full 22.02.2 all Linux firmware-full
30 ii armbian-zsh 22.05.0-trunk.0039 all Armbian improved ZShell
31 ii hostapd 3:2.10-6~armbian22.02.3+1 arm64 IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator
32 ii htop 3.1.0-0~armbian20.08.2+1 arm64 interactive processes viewer
33 ii linux-base 4.6 all Linux image base package
34 ii linux-dtb-legacy-sun50iw9 22.05.0-trunk.0001 arm64 Linux DTB, version 4.9.255-sun50iw9
35 ii linux-image-legacy-sun50iw9 22.05.0-trunk.0001 arm64 Linux kernel, version 4.9.255-sun50iw9
36 ii linux-libc-dev:arm64 22.02.1 arm64 Armbian Linux support headers for userspace development
37 ii linux-u-boot-orangepizero2-legacy 22.02.1 arm64 Uboot loader 2018.05
38
39 ### Loaded modules:
40
41 Module Size Used by
42 zram 36864 2
43 sprdwl_ng 438272 0
44 sprdbt_tty 40960 2
45 uwe5622_bsp_sdio 294912 2 sprdbt_tty,sprdwl_ng
46 fuse 135168 1
47
48 ### Current system health:
49
50 Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St.
51 17:24:27: --- 1.27 0% 0% 0% 0% 0% 0% 38.0°C 0/5
52 17:24:27: --- 1.27 4% 3% 0% 1% 0% 0% 39.8°C 0/5
53 17:24:28: --- 1.27 4% 4% 0% 0% 0% 0% 39.8°C 0/5
54 17:24:28: --- 1.27 4% 3% 0% 0% 0% 0% 39.8°C 0/5
55 17:24:28: --- 1.27 4% 3% 0% 1% 0% 0% 39.6°C 0/5
56 17:24:31: --- 1.25 0% 0% 0% 0% 0% 0% 51.0°C 0/5
57 17:24:32: --- 1.25 83% 0% 83% 0% 0% 0% 51.3°C 0/5
58 17:24:32: --- 1.25 4% 3% 0% 0% 0% 0% 47.0°C 0/5
59 17:24:33: --- 1.25 4% 2% 0% 1% 0% 0% 47.0°C 0/5
60 17:24:33: --- 1.25 4% 3% 0% 0% 0% 0% 47.0°C 0/5
61
62 ### resolv.conf
63
64 -rw-r--r-- 1 root root 80 May 22 20:39 /etc/resolv.conf
65 # Generated by NetworkManager
66 search home
67 nameserver XXX.XXX.8.8
68 nameserver XXX.XXX.1.1
69
70 ### Current sysinfo:
71
72 Linux 4.9.255-sun50iw9 (orangepizero2) 05/23/2022 _aarch64_ (4 CPU)
73
74 avg-cpu: %user %nice %system %iowait %steal %idle
75 0.20 0.00 0.11 0.01 0.00 99.67
76
77 Device tps kB_read/s kB_wrtn/s kB_dscd/s kB_read kB_wrtn kB_dscd
78 ram0 0.00 0.00 0.00 0.00 0 0 0
79 ram1 0.00 0.00 0.00 0.00 0 0 0
80 ram2 0.00 0.00 0.00 0.00 0 0 0
81 ram3 0.00 0.00 0.00 0.00 0 0 0
82 ram4 0.00 0.00 0.00 0.00 0 0 0
83 ram5 0.00 0.00 0.00 0.00 0 0 0
84 ram6 0.00 0.00 0.00 0.00 0 0 0
85 ram7 0.00 0.00 0.00 0.00 0 0 0
86 ram8 0.00 0.00 0.00 0.00 0 0 0
87 ram9 0.00 0.00 0.00 0.00 0 0 0
88 ram10 0.00 0.00 0.00 0.00 0 0 0
89 ram11 0.00 0.00 0.00 0.00 0 0 0
90 ram12 0.00 0.00 0.00 0.00 0 0 0
91 ram13 0.00 0.00 0.00 0.00 0 0 0
92 ram14 0.00 0.00 0.00 0.00 0 0 0
93 ram15 0.00 0.00 0.00 0.00 0 0 0
94 mmcblk0 0.20 8.02 1.85 0.00 598969 138500 0
95 mmcblk0p1 0.20 7.99 1.85 0.00 596865 138500 0
96 zram0 0.01 0.03 0.00 0.00 2248 128 0
97 zram1 0.34 0.02 1.34 0.00 1552 100004 0
98 zram2 0.00 0.00 0.00 0.00 0 0 0
99
100 --procs-- -----------------------memory---------------------- ---swap-- -----io---- -system-- --------cpu--------
101 r b swpd free buff cache si so bi bo in cs us sy id wa st
102 0 0 44 286612 21616 553836 0 0 2 1 66 94 0 0 100 0 0
103
104 total used free shared buff/cache available
105 Mem: 965Mi 123Mi 280Mi 9.0Mi 561Mi 817Mi
106 Swap: 482Mi 0.0Ki 482Mi
107
108 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT
109 /dev/zram1 lz4 50M 5.8M 269.2K 716K 4 /var/log
110 /dev/zram0 lzo 482.6M 48K 2.8K 40K 4 [SWAP]
111
112 17:24:34 up 20:45, 2 users, load average: 1.23, 1.13, 1.03
113
114 [ 4.856617] systemd[1]: Listening on initctl Compatibility Named Pipe.
115 [ 4.867022] systemd[1]: Listening on Journal Audit Socket.
116 [ 4.876808] systemd[1]: Listening on Journal Socket (/dev/log).
117 [ 4.886862] systemd[1]: Listening on Journal Socket.
118 [ 4.897062] systemd[1]: Listening on udev Control Socket.
119 [ 4.906722] systemd[1]: Listening on udev Kernel Socket.
120 [ 4.919475] systemd[1]: Mounting Huge Pages File System...
121 [ 4.933119] systemd[1]: Mounting POSIX Message Queue File System...
122 [ 4.945924] systemd[1]: Mounting RPC Pipe File System...
123 [ 4.959837] systemd[1]: Mounting Kernel Debug File System...
124 [ 4.969934] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
125 [ 4.970291] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
126 [ 4.977618] systemd[1]: Starting Restore / save the current clock...
127 [ 4.999016] systemd[1]: Starting Set the console keyboard layout...
128 [ 5.017174] systemd[1]: Starting Create list of static device nodes for the current kernel...
129 [ 5.036676] systemd[1]: Starting Load Kernel Module configfs...
130 [ 5.050067] systemd[1]: Starting Load Kernel Module drm...
131 [ 5.063605] systemd[1]: Starting Load Kernel Module fuse...
132 [ 5.077149] systemd[1]: Started Nameserver information manager.
133 [ 5.090860] systemd[1]: Reached target Network (Pre).
134 [ 5.092961] fuse init (API version 7.26)
135 [ 5.108304] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
136 [ 5.108471] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
137 [ 5.114153] systemd[1]: Starting Load Kernel Modules...
138 [ 5.129970] systemd[1]: Starting Remount Root and Kernel File Systems...
139 [ 5.145557] systemd[1]: Starting Coldplug All udev Devices...
140 [ 5.172584] systemd[1]: Mounted Huge Pages File System.
141 [ 5.180221] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
142 [ 5.182315] WCN: marlin_init entry!
143 [ 5.182990] WCN: wcn config bt wake host
144 [ 5.183639] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193
145 [ 5.183764] WCN: wcn config wifi wake host
146 [ 5.183782] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840
147 [ 5.187013] sdiohal:sdiohal_init ok
148 [ 5.187508] systemd[1]: Mounted POSIX Message Queue File System.
149 [ 5.187935] WCN: marlin_probe ok!
150 [ 5.200614] systemd[1]: Mounted RPC Pipe File System.
151 [ 5.205017] mtty_probe init device addr: 0xffffffc03b088a00
152 [ 5.205182] -->rfkill_bluetooth_init
153 [ 5.205303] <--rfkill_bluetooth_init
154 [ 5.210478] systemd[1]: Mounted Kernel Debug File System.
155 [ 5.221110] systemd[1]: Finished Restore / save the current clock.
156 [ 5.234468] systemd[1]: Finished Create list of static device nodes for the current kernel.
157 [ 5.254329] WCN: start_marlin [MARLIN_WIFI]
158 [ 5.254342] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1
159 [ 5.254346] WCN: the first power on start
160 [ 5.303839] systemd[1]: modprobe@configfs.service: Succeeded.
161 [ 5.304847] systemd[1]: Finished Load Kernel Module configfs.
162 [ 5.318274] systemd[1]: Finished Set the console keyboard layout.
163 [ 5.369360] WCN: marlin chip en pull up
164 [ 5.376936] systemd[1]: modprobe@drm.service: Succeeded.
165 [ 5.377606] systemd[1]: Finished Load Kernel Module drm.
166 [ 5.391050] systemd[1]: modprobe@fuse.service: Succeeded.
167 [ 5.391722] systemd[1]: Finished Load Kernel Module fuse.
168 [ 5.396071] sdiohal:sdiohal_scan_card
169 [ 5.396090] sunxi-wlan soc@03000000:wlan: bus_index: 1
170 [ 5.396212] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
171 [ 5.412683] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
172 [ 5.418240] systemd[1]: Finished Remount Root and Kernel File Systems.
173 [ 5.430171] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
174 [ 5.431022] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
175 [ 5.431041] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
176 [ 5.433524] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
177 [ 5.436560] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
178 [ 5.452667] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
179 [ 5.463282] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B
180 [ 5.464013] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B
181 [ 5.464064] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B
182 [ 5.464683] mmc1: new ultra high speed SDR104 SDIO card at address 8800
183 [ 5.465101] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000
184 [ 5.465178] WCN: marlin_scan_finish!
185 [ 5.465183] sdiohal:probe ok
186 [ 5.465191] sdiohal:scan end!
187 [ 5.465197] WCN: then marlin start to download
188 [ 5.465406] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001
189 [ 5.465414] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start!
190 [ 5.493534] systemd[1]: Mounting FUSE Control File System...
191 [ 5.509832] systemd[1]: Mounting Kernel Configuration File System...
192 [ 5.525623] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
193 [ 5.525981] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
194 [ 5.530375] systemd[1]: Starting Load/Save Random Seed...
195 [ 5.545782] systemd[1]: Starting Create System Users...
196 [ 5.561268] systemd[1]: Mounted FUSE Control File System.
197 [ 5.573956] systemd[1]: Mounted Kernel Configuration File System.
198 [ 5.604219] WCN: combin_img 0 marlin_firmware_write finish and successful
199 [ 5.604544] WCN: marlin_start_run read reset reg val:0x1
200 [ 5.604549] WCN: after do marlin_start_run reset reg val:0x0
201 [ 5.604805] WCN: s_marlin_bootup_time=5604796894
202 [ 5.611486] WCN: clock mode: TSX
203 [ 5.611697] WCN: marlin_write_cali_data sync init_state:0x1a0f50
204 [ 5.612615] systemd[1]: Finished Create System Users.
205 [ 5.627343] systemd[1]: Starting Create Static Device Nodes in /dev...
206 [ 5.636331] WCN: marlin_write_cali_data sync init_state:0x1a0f50
207 [ 5.662939] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1
208 [ 5.662949] WCN: sdio_config bt_wake_host trigger:[high]
209 [ 5.662952] WCN: sdio_config irq:[inband]
210 [ 5.662957] WCN: sdio_config wl_wake_host trigger:[high]
211 [ 5.662961] WCN: sdio_config wake_host_level_duration_time:[20ms]
212 [ 5.662964] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse]
213 [ 5.662968] WCN: marlin_send_sdio_config_to_cp sdio_config:0xb8f01 (enable config)
214 [ 5.663372] WCN: marlin_write_cali_data finish
215 [ 5.663579] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
216 [ 5.686340] systemd[1]: Finished Create Static Device Nodes in /dev.
217 [ 5.689610] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
218 [ 5.697061] systemd[1]: Reached target Local File Systems (Pre).
219 [ 5.716281] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
220 [ 5.733309] systemd[1]: Mounting /tmp...
221 [ 5.742888] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
222 [ 5.749649] systemd[1]: Starting Rule-based Manager for Device Events and Files...
223 [ 5.769647] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
224 [ 5.770873] systemd[1]: Finished Coldplug All udev Devices.
225 [ 5.784044] systemd[1]: Mounted /tmp.
226 [ 5.796279] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0
227 [ 5.796289] WCN: marlin_bind_verify confuse data: 0x8badefa1b12bbe26aeffa8d1a5c07
228 [ 5.796305] WCN: marlin_bind_verify verify data: 0xccd7f963c19581907680f88f2044f687
229 [ 5.796862] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0
230 [ 5.797757] systemd[1]: Reached target Local File Systems.
231 [ 5.822954] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0
232 [ 5.822964] sdiohal:sdiohal_runtime_get entry
233 [ 5.823104] WCN: get_cp2_version entry!
234 [ 5.824768] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~
235 [ 5.824888] WCN: switch_cp2_log - close entry!
236 [ 5.826207] WCN: WCND at cmd read:OK
237 [ 5.826270] WCN: then marlin download finished and run ok
238 [ 5.826276] WCN: start_loopcheck
239 [ 5.827116] systemd[1]: Starting Armbian ZRAM config...
240 [ 5.840426] WCN: get_board_ant_num [one_ant]
241 [ 5.840437] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini
242 [ 5.840667] systemd[1]: Starting Set console font and keymap...
243 [ 5.859125] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
244 [ 5.873789] systemd[1]: Starting Preprocess NFS configuration...
245 [ 5.907069] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings.
246 [ 5.908921] systemd[1]: Finished Set console font and keymap.
247 [ 5.921446] systemd[1]: Finished Load Kernel Modules.
248 [ 5.977320] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
249 [ 5.987913] systemd[1]: nfs-config.service: Succeeded.
250 [ 5.988693] systemd[1]: Finished Preprocess NFS configuration.
251 [ 6.000454] systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped.
252 [ 6.000516] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped.
253 [ 6.000623] systemd[1]: Reached target NFS client services.
254 [ 6.030730] systemd[1]: Starting Apply Kernel Variables...
255 [ 6.049700] systemd[1]: Started Rule-based Manager for Device Events and Files.
256 [ 6.103096] systemd[1]: Finished Apply Kernel Variables.
257 [ 6.132131] systemd[1]: Starting Raise network interfaces...
258 [ 6.192100] zram: Added device: zram0
259 [ 6.200608] zram: Added device: zram1
260 [ 6.201655] zram: Added device: zram2
261 [ 6.254754] zswap: can't enable, initialization failed
262 [ 6.306875] zram0: detected capacity change from 0 to 506056704
263 [ 6.402817]
264 insmod_device_driver
265
266 [ 6.403106] device_chose finished 124!
267 [ 6.515961] systemd[1]: Reached target Hardware activated USB gadget.
268 [ 6.591407] systemd[1]: Finished Raise network interfaces.
269 [ 6.790414] systemd[1]: Found device /dev/ttyS0.
270 [ 6.931058] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
271 [ 6.947499] systemd[1]: Starting Load/Save RF Kill Switch Status...
272 [ 7.000604] sunxi-bt soc@03000000:bt: set block: 0
273 [ 7.016128] bluetooth_set_power: start_block=0
274 [ 7.016137] WCN: start_marlin [MARLIN_BLUETOOTH]
275 [ 7.016147] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1
276 [ 7.016151] WCN: marlin have open, GNSS is closed
277 [ 7.016156] bluetooth_set_power: end_block=0
278 [ 7.150873] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
279 [ 7.151036] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
280 [ 7.151499] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
281 [ 7.152116] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
282 [ 7.152845] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
283 [ 7.153123] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
284 [ 7.261105] systemd[1]: Started Load/Save RF Kill Switch Status.
285 [ 7.346581] Adding 494192k swap on /dev/zram0. Priority:5 extents:1 across:494192k SSFS
286 [ 7.485186] zram1: detected capacity change from 0 to 52428800
287 [ 7.756135] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
288 [ 7.756235] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
289 [ 7.756622] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
290 [ 7.757018] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
291 [ 7.757321] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
292 [ 7.757455] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
293 [ 9.556794] systemd[1]: Finished Armbian ZRAM config.
294 [ 9.570065] systemd[1]: Starting Armbian memory supported logging...
295 [ 9.641882] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
296 [ 12.268396] systemd[1]: systemd-rfkill.service: Succeeded.
297 [ 15.282963] systemd[1]: Finished Armbian memory supported logging.
298 [ 15.296984] systemd[1]: Starting Journal Service...
299 [ 15.573596] systemd[1]: Started Journal Service.
300 [ 15.619033] systemd-journald[1839]: Received client request to flush runtime journal.
301 [ 15.619755] systemd-journald[1839]: File /var/log/journal/11494a6a697a4f12a9711e32964a6788/system.journal corrupted or uncleanly shut down, renaming and replacing.
302 [ 15.621460] systemd-journald[1839]: Failed to open system journal: No space left on device
303 [ 15.740512] IPVS: Creating netns size=1928 id=1
304 [ 16.464099] nr_pdflush_threads exported in /proc is scheduled for removal
305 [ 16.724723] random: crng init done
306 [ 16.724736] random: 7 urandom warning(s) missed due to ratelimiting
307 [ 29.697950] sunxi-bt soc@03000000:bt: block state already is 0
308 [ 29.697968] bluetooth_set_power: start_block=0
309 [ 29.697973] WCN: start_marlin [MARLIN_BLUETOOTH]
310 [ 29.697982] WCN: marlin power state:5, subsys: [MARLIN_BLUETOOTH] power 1
311 [ 29.697986] WCN: marlin have open, GNSS is closed
312 [ 29.697991] bluetooth_set_power: end_block=0
313 [ 29.761168] IPVS: Creating netns size=1928 id=2
314 [ 29.884477] proc: unrecognized mount option "hidepid=invisible" or missing value
315 [ 29.936605] sunxi->update_param:1
316 [ 29.936683] HDMI Audio Enable Successfully
317 [ 29.996413] mtty_open device success!
318 [ 30.817492] IPVS: Creating netns size=1928 id=3
319 [ 30.984405] proc: unrecognized mount option "hidepid=invisible" or missing value
320 [ 32.270694] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
321 [ 32.271240] yzhang..read phyaddr=0, phyid=001cc916
322 [ 32.281941] yzhang..read phyaddr=1, phyid=001cc916
323 [ 32.295437] libphy: gmac0: probed
324 [ 32.330083] sunxi-gmac gmac0 eth0: eth0: Type(7) PHY ID 001cc916 at 0 IRQ poll (gmac0-0:00)
325 [ 32.341496] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
326 [ 32.408687] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
327 [ 32.792062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
328 [ 34.683886] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
329 [ 36.150102] raw_flag value is 0
330 [ 36.178343] raw_flag value is 0
331 [ 36.180367] raw_flag value is 0
332 [ 36.182202] raw_flag value is 0
333 [ 36.197017] raw_flag value is 0
334 [ 36.200413] raw_flag value is 0
335 [ 36.201948] raw_flag value is 0
336 [ 36.203373] raw_flag value is 0
337 [ 36.204783] raw_flag value is 0
338 [ 36.206303] raw_flag value is 0
339 [ 36.207939] raw_flag value is 0
340 [ 36.209154] raw_flag value is 0
341 [ 36.210600] raw_flag value is 0
342 [ 36.211938] raw_flag value is 0
343 [ 36.213672] raw_flag value is 0
344 [ 36.214895] raw_flag value is 0
345 [ 36.216306] raw_flag value is 0
346 [ 36.217709] raw_flag value is 0
347 [ 36.234993] raw_flag value is 0
348 [ 36.259542] raw_flag value is 0
349 [ 37.123060] sunxi->update_param:1
350 [ 37.123125] HDMI Audio Enable Successfully
351 [ 38.355236] sunxi->update_param:1
352 [ 38.355304] HDMI Audio Enable Successfully
353 [ 39.578521] sunxi->update_param:1
354 [ 39.578594] HDMI Audio Enable Successfully
355 [ 40.808845] sunxi->update_param:1
356 [ 40.808917] HDMI Audio Enable Successfully
357 [ 57.128009] raw_flag value is 0
358 [ 93.783021] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
359 [ 131.386231] raw_flag value is 0
360 [ 193.872357] raw_flag value is 0
361 [ 237.367284] raw_flag value is 0
362 [ 274.257807] raw_flag value is 0
363 [16102.393347] IPVS: Creating netns size=1928 id=4
364
365
366
367 ### interrupts:
368 CPU0 CPU1 CPU2 CPU3
369 3: 2917368 1748198 2473112 1654283 wakeupgen 48 Level sun4i_timer0
370 6: 1267681 292801 1203881 839381 GIC-0 27 Level arch_timer
371 8: 0 0 0 0 wakeupgen 61 Level 30f0000.iommu
372 151: 0 0 0 0 sunxi_pio_edge 134 Edge sdc0 cd
373 193: 0 0 0 0 sunxi_pio_edge 176 Edge bt_wake_isr
374 273: 147 0 0 0 wakeupgen 42 Level 3002000.dma-controller
375 275: 0 0 0 0 wakeupgen 106 Level RemoteIR_RX
376 276: 0 0 0 0 wakeupgen 104 Level rtc
377 278: 0 0 0 0 wakeupgen 93 Level cedar_dev
378 280: 542 0 0 0 wakeupgen 0 Level uart0
379 283: 0 0 0 0 wakeupgen 9 Level twi3
380 284: 34524 0 0 0 wakeupgen 105 Level twi5
381 285: 0 0 0 0 wakeupgen 25 Level sunxi_usb_udc
382 288: 2 0 0 0 wakeupgen 28 Level ehci_hcd:usb1
383 289: 330 0 0 0 wakeupgen 29 Level ohci_hcd:usb4
384 290: 0 0 0 0 wakeupgen 30 Level ehci_hcd:usb2
385 291: 0 0 0 0 wakeupgen 31 Level ohci_hcd:usb5
386 292: 0 0 0 0 wakeupgen 32 Level ehci_hcd:usb3
387 293: 0 0 0 0 wakeupgen 33 Level ohci_hcd:usb6
388 294: 0 0 0 0 wakeupgen 12 Level spi0
389 295: 0 0 0 0 wakeupgen 13 Level spi1
390 298: 2361 0 0 20976 wakeupgen 35 Level sunxi-mmc0
391 299: 97901 0 0 0 wakeupgen 36 Level sunxi-mmc1
392 300: 37 0 0 0 wakeupgen 88 Level dispaly
393 303: 4482846 0 0 0 wakeupgen 66 Level dispaly
394 314: 0 0 0 0 wakeupgen 91 Edge ss
395 316: 0 0 0 0 wakeupgen 89 Level 1420000.deinterlace
396 319: 0 0 0 0 wakeupgen 20 Edge sunxikbd
397 320: 0 0 0 0 wakeupgen 14 Level gmac0
398 IPI0: 191450 179161 416226 263270 Rescheduling interrupts
399 IPI1: 2823 2876 3836 2938 Function call interrupts
400 IPI2: 0 0 0 0 CPU stop interrupts
401 IPI3: 157439 211741 411155 358924 Timer broadcast interrupts
402 IPI4: 105783 73320 111334 75038 IRQ work interrupts
403 IPI5: 0 0 0 0 CPU wake-up interrupts
404 Err: 0
