chakatun

@Джок OK. Understood everything, thank you very much. I took another TV box on the RK3228A chip 1GB of RAM, 8GB, it has other internal memory and I easily installed the 5.15.74 image on it. But now there is another problem - WI FI does not work. in rk322x-config it says: unknown device. Фото девайса память WI FI chip

@ Max Sterg I had problems with loading the multitool later it turned out to be a bad SD card. Keep in mind you must have a good original SD card.

@jock Does that mean I won't be able to install new images from the github repositories on my board?

@MattWestB Board name R329Q V8.1. To switch the board to MASKROM, you need to close the contact on the board next to which the small letter "D" to GND. Here is a photo of all the chips that are on this board. These chips were on the bottom And these are on top. I was wrong these 3 chips were on the bottom And these are on top

@RaptorSDS Thanks for answering. I think that I have a board with NAND, and therefore I can only install the old kernel on it. Yesterday, during installation, I chose the place "Burn image to flash" and erased the bootloader))), I could not switch to maskrom mode, so I disassembled the prefix and closed the test point and restored the bootloader. How do I find out what type of memory is on my board? Here is a photo of my board And from the multitool menu.

Sorry! I am writing from my smartphone. The photo uploaded in a weird way. I wanted to add to what I said above, that only images that say buster legasy work on the TV box.

Hello. Somewhere a year ago I purchased a tv box on the rk3228a SELENGA R4 chip and installed Armbian _22.02.0-trunk_Rk322x-box_bullseye_Legacy_4.4.194_minimal.img on it, it worked. Now I wanted to install a new one from the github repository, but I could not install one of them, I tried: jammy_current_5.15.74, jammy_edge_5.19.16, sid_current_5.15.74, sid_edge_5.19.16 none of these did not start. I took a photo of what he writes when he tries to boot. Please tell me what could be the reason?