Efe Çetin
-
Posts
121 -
Joined
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Efe Çetin
-
-
15 hours ago, OttawaHacker said:
In 6.1, there are only two options available. Or is this a pre-release thing?
It's interesting. I'll check it out to see what's missing
-
You need something like https://github.com/armbian/build/blob/main/patch/kernel/rockchip-rk3588-edge/dt/rk3588s-orangepi-5b.dts#L32 to enable it on mainline. I don't know the situation because of i don't have ap6275p module for opi5 but it works with Khadas edge 2.
And we have an overlay for opi5 in 6.1 https://github.com/armbian/linux-rockchip/blob/rk-5.10-rkr6/arch/arm64/boot/dts/rockchip/overlay/orangepi-5-ap6275p.dts
-
You should download it from here https://redirect.armbian.com/orangepi5-plus/archive/
-
24 minutes ago, Gullik said:
A fall backwards,
both 24.5.0-trunk.409 Noble and 24.5.0-trunk.410 Noble and trunk.411
seem to be missing:
[ 6.828040] panthor fb000000.gpu: [drm] *ERROR* Failed to load firmware image 'mali_csffw.bin'
a find / does not find it, so it seems to be missing from packaging....
I m trying to find it ....
Install armbian-firmware-full
-
2 minutes ago, Gullik said:
Yes, I understand, but it is ...edge... is'nt it?
Packages are built daily, not after every change on main. The current package on armbian beta repo was built on 8:22 11 April. The fix got merged after this build.
If you want to try the fix, you can build package using Armbian build system
-
14 minutes ago, Gullik said:
An apt update/upgrade fixed the video problem, and upgraded to trunk.405.
It was just got merged recently. Wait for 406 or 407 to get the fix.
-
-
This PR should fix USBC on OPi5 -> https://github.com/armbian/build/pull/6485
-
Unfortunately opi5 is not near me and can't make any test right now. I'll try to find what's wrong with usbc on 6.8 when i find a chance to try.
-
You can add it like https://github.com/armbian/build/blob/main/patch/kernel/rockchip-rk3588-edge/board-khadas-edge2-add-nodes.patch#L1347
I suppose you don't need to make any change since 5b and edge2 uses the same pcie phy
-
@Marco Schirrmeister can you send a PR to armbian to add your patch?
-
-
I think you use opi5 image instead of opi5+. You have to read description properly
-
-
Vertical USB2 and type-c is not working yet
-
1- HDMI is pretty experimental.
2- Can you send lsusb output
3- Yeah it's a known issue about edge kernel. I suppose it's related to cpufreq
-
What Works:
- USB2 and USB3
- PCIe2
- GMAC
- eMMC on HS200 mode
- Cpufreq
- User and maskrom buttons
Dmesg Output: https://paste.armbian.com/onelomofit
You can download them from Rolling releases section on https://www.armbian.com/nanopi-r6s/ page. Images include devicetrees for R6S and R6C. If you have R6C, you must change the devicetree from armbianEnv.txt.
-
@robnielsen yes it has the orange pi 5 dtb, you can migrate
-
-
Yes dual boot is possible.
You can use uboot to load EFI files and then you can use a bootloader like grub, systemdboot.
Btw you can use https://github.com/edk2-porting/edk2-rk3588 too. It works well with 5.10 legacy kernel.
-
You need to download it from https://redirect.armbian.com/orangepi5-plus/archive/
-
-
Can you debug it with usb ttl if you have? Looks like the overlay is not loaded
-
Offcial images dont boot
in Orange Pi 5 Plus
Posted
@DroZDI which image did you download