Mario663

Ok I burned the Armbian_20.05.6_Arm-64_bullseye_current_5.7.2_desktop_20200612.img.xz but this image still uses the old method with the .deb file I tried the following .deb files renaming them to deb.img but none make me boot still on the arc64 s905x screen! meson-gxl-s905x-p212.dtb meson-gxl-s905x-khadas-vim.dtb meson-gxbb-vega-s95-meta.dtb meson-gxbb-p200.dtb meson-gxbb-p201.dtb I am attaching my uEnv.txt configuration uEnv.txt armbian_first_run.txt.template

As already said in the first post, I've already managed to install 5.88 in the emmc, this too would be fine, only that it annoys me to press x at startup!

for simple use as a mini pc!

ok happy holidays meanwhile I'm testing other builds the 20.10 bullseye stays here for me!

[ 5.212700] lima d00c0000.gpu: error-ENODEV: _opp_set_regulator (mali) found

Anyway, I'm attaching the xlinux.conf file that you gave me and that I use now, I don't want windows to modify it again! extlinux.conf

I also tried to remove the mouse & keyboard adapter as it crashed immediately after recognizing the drivers anyway but it still crashes before!

exact

Dude I'm doing everything you tell me, I'm trying to explain everything I've done, I downloaded the xfce kinetic with whale etcher I burned it on an sd then I downloaded your extlinux.conf file and replaced it with what's inside...then i changed the u-boot 905X 912 file to u-boot.ext i inserted the sd into the tv-box slot and it stuck on the photo screen!

I get stuck on this screen!!

ok now I just finished burning XFCE now I try and update you!

etcher 8.33GB

Ah so even if etcher requires 8 gb then in the emmc I can install it anyway!? ok then as soon as i have some time i redownload the xfce and burn it to sd....i will always have to use your extlinux.conf file right? keep in mind that now on the emmc I have Armbian version 5.88 pre-installed!

or is there some other version!?

Yes, I have to see how much the penultimate release takes up....if it takes up less than 8 gb then I can install it on the emmc....what is the penultimate release if 20.10!?

Yes you are right I downloaded the minimal sid because I saw that the xfce occupies more than 8GB from etcher to be able to install it in the emmc

with your file it works now what command should I give to start the graphic environment...remember that this is the minimal image, the only one that has about 2.5GB to be able to install it in the flash memory

Ok thank you very much for the help you are giving me 😊, I will try your file and update you

Ok extlinux.conf

I from the extlinux.conf file he burned etcher just stripped the # off the file FDT /dtb/amlogic/meson-gxl-s905x-p212.dtb

LABEL Armbian LINUX /uImage INITRD /uInitrd #FDT /dtb/amlogic/meson-gxbb-p200.dtb FDT /dtb/amlogic/meson-gxl-s905x-p212.dtb #FDT /dtb/amlogic/meson-gxl-s905w-tx3-mini.dtb #FDT /dtb/amlogic/meson-gxm-q200.dtb #FDT /dtb/amlogic/meson-g12a-x96-max.dtb #FDT /dtb/amlogic/meson-g12b-odroid-n2.dtb append root=UUID=a9d31d97-348f-4685-9a2c-675531952cd1 rw no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 bootsplash.bootfile=bootsplash.armbian

Ah Understood sorry now I'll copy & paste my extlinux.conf

https://youtube.com/watch?v=k5KnZitUcKM&feature=shares

Ah got it! ok I'll take pictures and videos and post them!