Priscilo Jessico Silva

Okay, I'll try to format the SD with another program other than Rufus. The image was the one you suggested. I followed step 3 and 4 correctly. Once again, thank you for your support and attention. Information extracted from my H96 Pro Plus: <<< System >>> Device Model: Alfawise H96 Pro+ Device Type: TV Box Manufacturer: Amlogic Model: H96 PRO+ Brand: Amlogic Board: q201_9377 Device: q201_9377 Hardware: amlogic Platform: gxm Product: q201_9377 Installed RAM: 3 GB Total Memory: 2775 MB Available Memory: 1207 MB Internal Storage Total Space: 25.72 GB Internal Storage Free Space: 23.72 GB Bluetooth Version: 4+ <<< CPU >>> SoC Model: AMLogic S912 Core Architecture: 8x ARM Cortex-A53 @ 1000 MHz Manufacturing Process: 28 nm Instruction Set: 64-bit ARMv8-A CPU Revision: r0p4 CPU Cores: 8 CPU Clock Range: 100 - 1512 MHz

Yes. I performed the procedure to change the file name to "uboot.ext". I tested with 3 different SDs and the problem is repeated.

"Good afternoon. Thank you very much for your willingness to share your experience. Yesterday I went to bed at 2:00 am trying to follow your instructions, but unfortunately my h96 PRO+ did not even boot from the SD card. Even though I did exactly what you instructed, including changing the name of the file. When I turn on the power of the TVBox with the reset button pressed and the SD card inserted, it simply goes into a loop, only showing the H96 PRO Plus logo and then disappearing and reappearing. When I eject the SD card and press the reset button, the expected behavior occurs and it goes into the Android boot, with the default options "Factory Reset, etc..."."