MelioraHS

dear dave3, Have you encountered the problem that when recording Armiban to an SD card, the nano pi neo air does not appear on the PC as a com port? If I install the old version of Armbian 5.73 and connect it via USB to the PC, it sees it as a com port.

Hello I need to connect my modem Huawei E3372-325 to my NanoPI but when i write command ls usb get it root@PC_42:~# lsusb Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 3566:2001 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub When i write in to /etc/usb_modeswitch.conf lines DefaultVendor = 3566 DefaultProduct = 2001 and enter command sudo usb_modeswitch -v 3566 -p 2001 -c /etc/usb_modeswitch.conf Look for default devices ... product ID matched Found devices in default mode (1) Access device 002 on bus 003 Get the current device configuration ... Current configuration number is 1 Use interface number 0 with class 8 USB description data (for identification) ------------------------- Manufacturer: Mobile Product: Mobile Serial No.: 123456789ABCD ------------------------- Warning: no switching method given. See documentation -> Run lsusb to note any changes. Bye! I think modem is not connected as well to NanoPI maybe samebody can solve that issue? Maybe i need some libs or drivers?