Abd Choucair

Unfortunately when I put my pendrive and boot from pendrive with the desktop version I get Uuid=xxxx does not exist. Dropping to a shell But I can boot fine with the minimal image

thank you so much doing it now

ok i figured out how to install it ran the /root/install-aml.sh command successfully installed but how do i get to gui so i can complete 3) Upon completion of the installation, I replaced the "emmc_autoscript" file with "s905_autoscript" (and renamed it to "emmc_autoscript"). 4) Used the command "$ sudo blkid" to identify the UUID of my EMMC partition. 5) Opened the "armbianEnv.txt" file and updated the UUID with that of my EMMC partition, then saved the file.

@calusbr i used your method but im stuck on my a95x and it just bootloops this is what ive got extraargs=earlycon rootflags=data=writeback rw no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 bootlogo=false verbosity=7 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u console=both # DTB file for this tvbox # fdtfile=amlogic/meson-gxl-s905x-nexbox-a95x.dtb fdtfile=amlogic/meson-sm1-a95xf3-air.dtb # set this to the UUID of the root partition (value can be found in /extlinux/extlinux.conf after APPEND root= or with blkid) rootdev=UUID=92139c84-3871-41d7-a3f2-e8a943cbfa87 # Enable ONLY for gxbb (S905) / gxl (S905X/L/W) to create fake u-boot header soc_fixup=gxl-