[iMX8MP-SOM-4GB-IND/]

hi all. any hints to merge olimex imx8 board and compile armbian kernel 6.x and deb12 ?

[BigTreeTech CB2 no vendor config]

thnx.

it seems latest working vendor kernel for 3566 is 6.1.115.
i already tried rk35xx, with bigtreetech_cb2.dtb but it stops at u-boot (in uart console)
using orangepi-3b it boots, but gives errors in dmesg. when i try to add fdtfile bigtreetech_cb2.dtb, it stops boot 

.... 
47274496 bytes read in 3902 ms (11.6 MiB/s)
Failed to load '/boot/dtb/rockchip/rk3566-bigtreetech-cb2.dtb'
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
Trying kaslrseed command... Info: Unknown command can be safely ignored since kaslrseed does not apply to all boards.
Unknown command 'kaslrseed' - try 'help'
.....

but when i boot btt_cb2 as orangepi3b board, it boots and even shows mpp venc/dec/npu/whatever modules properly loaded.
 

not checked yet if it works really

maybe need to make some hybrid dtb from btt_cb2 and orange3b

=========

btw, could You share what You do for 35xx board change? when i tried to change family rockchip64 to 35xx, it comiled, but not copied bigtreeetech_cb2.dtb to boot , and not boots ewven if i copy it by myself there

 

[BigTreeTech CB2 no vendor config]

features i looking for is a  MPP/NPU  - quite decent video encoders/processing/npu engine support, unfortunateli it still sticks to vendor 6.1.y kernel.

[BigTreeTech CB2 no vendor config]

Hi all
i tried to compile BTT CB2 with bookworm and vendor kernel to get MPP and NPU working, but got that :
sha256sum: config/kernel/linux-rockchip64-vendor.config: No such file or directory

is it missed ? How to compile vendor kernel for MPP support?

thanks
 

[LuckFox Core3566 flash eMMC]

Hi all. i got Armbian for luckfox, compiled by builder, and also tried downloaded img binaries. but cannot find clear and complete instruction how to write thtat img to eMMC  and for SDCard .

what tools and steps should be used for get Armbian img boots and works on that board.

thanks in advance

PS. BigTreetech CB2 same problem - no clear info about flash eMMC and SDCard.

 

[Nanopi neo air ffmpeg with Cedrus H264]

Hi all. for kernels 5.1x and 6.1.xx - is it any working hardware encoding solutions for H3 soc? for Nano Pi neo/neo2 ?