ben51

Hello, I’m having an issue with my MX10 TV box, which uses an RK3328 according to the PCB. I had to use Multitool to perform a chroot after a kernel update that failed. I decided to reinstall the system cleanly. I booted into Multitool and erased the eMMC. Unfortunately, I think I used an image for RK322X. Since then, I have been unable to boot into Multitool from an SD card or USB drive (I’ve tried all available USB ports). I’ve seen that there is a de-bricking method, but my eMMC chip does not have any visible pins for this operation. I also tried connecting my board to my PC via its debug port, but nothing appears in dmesg or lsusb. Are there any other possible solutions, or is my box permanently bricked?

Thanks for your reply! It’s booting now.

I’m encountering the same issue but on an RK3328 (also on eMMC). After an update last week, my system no longer boots. The error messages I’m getting seem similar to those mentioned here for the RK3318, so I think the issue might be the same. From what I understand, a kernel update seems to resolve the problem. However, I’m currently blocked at initramfs. Is there a method to boot into an older kernel, or should I consider a complete re-installation? Thanks!