I made a configuration via armbian-config, but the camera does not work, here are the messages
/sys/bus/i2c/drivers/ov13855
3-0036 bind uevent unbind
sudo i2cdetect -y 3
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- UU -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- UU -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- 58 -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
dmesg | grep ov13855
[ 14.074752] platform csi2-dphy0: Fixed dependency cycle(s) with /i2c@feab0000/ov13855-1@36
[ 14.338234] ov13855 3-0036: driver version: 00.01.04
[ 14.338301] ov13855 3-0036: Failed to get power-gpios, maybe no use
[ 14.338330] ov13855 3-0036: Looking up avdd-supply from device tree
[ 14.338336] ov13855 3-0036: Looking up avdd-supply property in node /i2c@feab0000/ov13855-1@36 failed
[ 14.338365] ov13855 3-0036: supply avdd not found, using dummy regulator
[ 14.338418] ov13855 3-0036: Looking up dovdd-supply from device tree
[ 14.338424] ov13855 3-0036: Looking up dovdd-supply property in node /i2c@feab0000/ov13855-1@36 failed
[ 14.338434] ov13855 3-0036: supply dovdd not found, using dummy regulator
[ 14.338454] ov13855 3-0036: Looking up dvdd-supply from device tree
[ 14.338459] ov13855 3-0036: Looking up dvdd-supply property in node /i2c@feab0000/ov13855-1@36 failed
[ 14.338468] ov13855 3-0036: supply dvdd not found, using dummy regulator
[ 14.338484] ov13855 3-0036: could not get default pinstate
[ 14.338487] ov13855 3-0036: could not get sleep pinstate
[ 14.348869] ov13855 3-0036: Detected OV00d855 sensor, REVISION 0xb0
[ 14.863602] ov13855 3-0036: Consider updating driver ov13855 to match on endpoints
[ 14.863609] rockchip-csi2-dphy csi2-dphy0: dphy0 matches m00_b_ov13855 3-0036:bus type 5
with the original distribution the camera works
