Tomi Skies
-
Posts
4 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Tomi Skies
-
-
-
@Nick A I tried the Armbian-unofficial_25.05.0-trunk_X96q-lpddr3_bookworm_edge_6.12.11_xfce_desktop.img
I don't really know what I'm doing tbh, but it seems like mostly everything works except wifi.
Don't know if this is of any interest, but here is a UART log of the first boot.
19:28:07.082 -> U-Boot SPL 2025.01-armbian-2025.01-S6d41-P7151-H8869-V004f-Bb703-R448a-dirty (Apr 02 2025 - 21:10:39 -0400)
19:28:07.159 -> DRAM:testing 32-bit width, rank = 2
19:28:07.159 -> DRAM:Store cfg
19:28:07.159 -> DRAM:1st writing pattern
19:28:07.159 -> DRAM:detecting column address bits
19:28:07.159 -> detected 10 columns
19:28:07.159 -> DRAM:restore cfg
19:28:07.159 -> DRAM:reconfigure for all active rows
19:28:07.159 -> DRAM:store cfg
19:28:07.159 -> DRAM:2nd writing pattern
19:28:07.192 -> DRAM:detecting row address bits
19:28:07.192 -> detected 14 rows
19:28:07.192 -> DRAM:restoring cfg
19:28:07.192 -> DRAM:end of auto detect dram size
19:28:07.192 -> MBUS port 0 cfg0 0100000d cfg1 00640080
19:28:07.192 -> MBUS port 1 cfg0 06000009 cfg1 01000578
19:28:07.192 -> MBUS port 2 cfg0 0200000d cfg1 00600100
19:28:07.192 -> MBUS port 3 cfg0 01000009 cfg1 00500064
19:28:07.192 -> MBUS port 4 cfg0 20000209 cfg1 1388157c
19:28:07.192 -> MBUS port 5 cfg0 00640209 cfg1 00200040
19:28:07.225 -> MBUS port 6 cfg0 00640209 cfg1 00200040
19:28:07.225 -> MBUS port 8 cfg0 01000009 cfg1 00400080
19:28:07.225 -> MBUS port 11 cfg0 01000009 cfg1 00640080
19:28:07.225 -> MBUS port 14 cfg0 04000009 cfg1 00400100
19:28:07.225 -> MBUS port 16 cfg0 2000060d cfg1 09600af0
19:28:07.225 -> MBUS port 21 cfg0 0800060d cfg1 02000300
19:28:07.225 -> MBUS port 22 cfg0 01000009 cfg1 00640080
19:28:07.225 -> MBUS port 25 cfg0 0064000f cfg1 00200040
19:28:07.225 -> MBUS port 26 cfg0 20000209 cfg1 1388157c
19:28:07.262 -> MBUS port 37 cfg0 01000009 cfg1 00400080
19:28:07.262 -> MBUS port 38 cfg0 00640209 cfg1 00200040
19:28:07.262 -> MBUS port 39 cfg0 20000209 cfg1 1388157c
19:28:07.262 -> MBUS port 40 cfg0 00640209 cfg1 00200040
19:28:07.262 -> 1024 MiB
19:28:07.308 -> Trying to boot from MMC1
19:28:07.819 -> NOTICE: BL31: v2.10.14(debug):armbian
19:28:07.852 -> NOTICE: BL31: Built : 18:07:43, Apr 2 2025
19:28:07.852 -> NOTICE: BL31: Detected Allwinner H616 SoC (1823)
19:28:07.852 -> NOTICE: BL31: Found U-Boot DTB at 0x4a0b2520, model: hechuang,x96-q LPDDR3
19:28:07.852 -> INFO: ARM GICv2 driver initialized
19:28:07.852 -> INFO: Configuring SPC Controller
19:28:07.852 -> INFO: PMIC: Probing AXP305 on RSB
19:28:07.852 -> ERROR: RSB: set run-time address: 0x10003
19:28:07.884 -> INFO: Could not init RSB: -65539
19:28:07.884 -> INFO: BL31: Platform setup done
19:28:07.884 -> INFO: BL31: Initializing runtime services
19:28:07.884 -> INFO: BL31: cortex_a53: CPU workaround for erratum 855873 was applied
19:28:07.884 -> INFO: BL31: cortex_a53: CPU workaround for erratum 1530924 was applied
19:28:07.884 -> INFO: PSCI: Suspend is unavailable
19:28:07.884 -> INFO: BL31: Preparing for EL3 exit to normal world
19:28:07.928 -> INFO: Entry point address = 0x4a000000
19:28:07.928 -> INFO: SPSR = 0x3c9
19:28:07.928 -> INFO: Changed devicetree.
19:28:08.196 -> ns16550_serial serial@5000000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
19:28:08.238 ->
19:28:08.238 ->
19:28:08.238 -> U-Boot 2025.01-armbian-2025.01-S6d41-P7151-H8869-V004f-Bb703-R448a-dirty (Apr 02 2025 - 21:10:39 -0400) Allwinner Technology
19:28:08.238 ->
19:28:08.238 -> CPU: Allwinner H616 (SUN50I)
19:28:08.238 -> Model: hechuang,x96-q LPDDR3
19:28:08.238 -> DRAM: 1 GiB
19:28:08.318 -> Core: 58 devices, 20 uclasses, devicetree: separate
19:28:08.318 -> WDT: Not starting watchdog@30090a0
19:28:08.318 -> MMC: mmc@4020000: 0, mmc@4021000: 3, mmc@4022000: 1
19:28:08.362 -> Loading Environment from FAT... Unable to use mmc 0:1...
19:28:08.400 -> In: serial@5000000
19:28:08.400 -> Out: serial@5000000
19:28:08.400 -> Err: serial@5000000
19:28:08.400 -> No USB device found
19:28:08.400 -> Net: eth0: ethernet@5030000
19:28:08.400 -> starting USB...
19:28:08.400 -> No USB controllers found
19:28:08.439 -> Hit any key to stop autoboot: 1 0
19:28:09.465 -> switch to partitions #0, OK
19:28:09.465 -> mmc0 is current device
19:28:09.465 -> Scanning mmc 0:1...
19:28:09.465 -> Found U-Boot script /boot/boot.scr
19:28:09.465 -> 4641 bytes read in 2 ms (2.2 MiB/s)
19:28:09.498 -> ## Executing script at 4fc00000
19:28:09.498 -> U-boot loaded from SD
19:28:09.498 -> Boot script loaded from mmc
19:28:09.498 -> 202 bytes read in 1 ms (197.3 KiB/s)
19:28:09.498 -> Load fdt: /boot/dtb/allwinner/sun50i-h313-x96-q-lpddr3.dtb
19:28:09.539 -> 37577 bytes read in 7 ms (5.1 MiB/s)
19:28:09.539 -> Working FDT set to 4fa00000
19:28:09.539 -> Failed to load '/boot/dtb/allwinner/overlay/sun50i-h616-fixup.scr'
19:28:10.920 -> 15484849 bytes read in 1362 ms (10.8 MiB/s)
19:28:14.642 -> 42621440 bytes read in 3744 ms (10.9 MiB/s)
19:28:14.642 -> Moving Image from 0x40080000 to 0x40200000, end=0x42b50000
19:28:14.909 -> ## Loading init Ramdisk from Legacy Image at 4ff00000 ...
19:28:14.950 -> Image Name: uInitrd
19:28:14.950 -> Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
19:28:14.950 -> Data Size: 15484785 Bytes = 14.8 MiB
19:28:14.950 -> Load Address: 00000000
19:28:14.950 -> Entry Point: 00000000
19:28:14.950 -> Verifying Checksum ... OK
19:28:15.040 -> ## Flattened Device Tree blob at 4fa00000
19:28:15.040 -> Booting using the fdt blob at 0x4fa00000
19:28:15.040 -> Working FDT set to 4fa00000
19:28:15.040 -> Loading Ramdisk to 4913b000, end 49fff771 ... OK
19:28:15.073 -> Loading Device Tree to 00000000490c9000, end 000000004913afff ... OK
19:28:15.073 -> Working FDT set to 490c9000
19:28:15.073 ->
19:28:15.073 -> Starting kernel ...
19:28:15.073 ->
19:32:05.614 ->19:32:05.614 -> x96q-lpddr3 login: root (automatic login)
19:32:05.614 ->19:32:29.834 -> Last login: Thu Apr 3 01:16:15 UTC 2025 on tty1
19:33:10.979 ->19:33:10.979 -> x96q-lpddr3 login: root (automatic login)
19:33:10.979 ->19:33:10.979 -> Last login: Thu Apr 3 01:16:15 UTC 2025 on ttyS0
19:33:17.425 ->
19:33:17.425 -> Waiting for system to finish booting ...
19:33:25.662 -> Waiting for network startup to complete...
19:33:42.217 -> [H[J[3JWelcome to [1m[97mArmbian-unofficial[0m!
19:33:42.217 ->
19:33:42.217 -> Documentation: [1m[92mhttps://docs.armbian.com/[0m | Community support: [1m[92mhttps://community.armbian.com/[0m
19:33:42.263 ->
19:33:42.263 ->
19:33:42.263 -> [1A[KIP address: [92m[0m [1m[97mWaiting for local connection![0m Retrying... (6)
19:33:43.299 -> [1A[KIP address: [92m[0m [1m[97mWaiting for local connection![0m Retrying... (5)
19:33:44.298 -> [1A[KIP address: [92m[0m [1m[97mWaiting for local connection![0m Retrying... (4)
19:33:45.362 -> [1A[KIP address: [92m[0m [1m[97mWaiting for local connection![0m Retrying... (3)
19:33:46.358 -> [1A[KIP address: [92m[0m [1m[97mWaiting for local connection![0m Retrying... (2)
19:33:47.390 -> [1A[KIP address: [92m[0m [1m[97mWaiting for local connection![0m Retrying... (1)
19:33:48.451 -> [1A[KIP address: [92m[0m [1m[31mNetwork connection timeout![0m
19:33:49.462 ->
19:33:49.462 -> Create root password:19:33:57.499 -> Armbian-unofficial 25.05.0-trunk Bookworm ttyS0
19:33:57.548 ->
19:33:57.548 -> x96q-lpddr3 login: [ 1858.394981] reboot: Power down
19:59:13.714 -> � -
So there is some conflicting naming between the name of the unit and the name on the board revision code.
The name of the unit would suggest that it's a X96-Q clone,
but the revision number suggests that it's a T95 mini. Like as seen in this video
Noob distro inquiry? picture included.
in Allwinner CPU Boxes
Posted
@Nick A I think this is what you were asking for?
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.12.11-edge-sunxi64 (build@armbian) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP PREEMPT Thu Jan 23 11:23:05 EST 2025
[ 0.000000] Machine model: hechuang,x96-q LPDDR3
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: 0x0000000040000000..0x000000004007ffff (512 KiB) nomap non-reusable secmon@40000000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000004007ffff]
[ 0.000000] node 0: [mem 0x0000000040080000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] cma: Reserved 64 MiB at 0x000000007ac00000 on node -1
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] No bootconfig data provided, so skipping bootconfig
[ 0.000000] percpu: Embedded 33 pages/cpu s95832 r8192 d31144 u135168
[ 0.000000] pcpu-alloc: s95832 r8192 d31144 u135168 alloc=33*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: root=UUID=adc7b539-05e1-42cd-b4a4-263c1693e027 rootwait rootfstype=ext4 splash plymouth.ignore-serial-consoles console=ttyS0,115200 console=tty1 consoleblank=0 loglevel=1 ubootpart=1709ba65-01 usb-storage.quirks= cgroup_enable=memory
[ 0.000000] Unknown kernel command line parameters "splash ubootpart=1709ba65-01 cgroup_enable=memory", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x000000007aa80000-0x000000007ab80000] (1MB)
[ 0.000000] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 56722 entries in 222 pages
[ 0.000000] ftrace: allocated 222 pages with 6 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000748] Console: colour dummy device 80x25
[ 0.000764] printk: legacy console [tty1] enabled
[ 0.000876] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.000894] pid_max: default: 32768 minimum: 301
[ 0.001130] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.001147] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.013413] rcu: Hierarchical SRCU implementation.
[ 0.013438] rcu: Max phase no-delay instances is 1000.
[ 0.013807] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.018991] EFI services will not be available.
[ 0.019666] smp: Bringing up secondary CPUs ...
[ 0.023824] Detected VIPT I-cache on CPU1
[ 0.023982] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.030517] Detected VIPT I-cache on CPU2
[ 0.030671] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.037099] Detected VIPT I-cache on CPU3
[ 0.037253] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.037464] smp: Brought up 1 node, 4 CPUs
[ 0.037485] SMP: Total of 4 processors activated.
[ 0.037492] CPU: All CPU(s) started at EL2
[ 0.037511] CPU features: detected: 32-bit EL0 Support
[ 0.037517] CPU features: detected: 32-bit EL1 Support
[ 0.037526] CPU features: detected: CRC32 instructions
[ 0.037595] alternatives: applying system-wide alternatives
[ 0.039007] Memory: 899180K/1048576K available (16448K kernel code, 3734K rwdata, 13308K rodata, 8000K init, 599K bss, 79692K reserved, 65536K cma-reserved)
[ 0.040011] devtmpfs: initialized
[ 0.052347] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.052395] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.056229] 22192 pages in range for non-PLT usage
[ 0.056260] 513712 pages in range for PLT usage
[ 0.056531] pinctrl core: initialized pinctrl subsystem
[ 0.057495] DMI not present or invalid.
[ 0.061191] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.064428] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.066238] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.068571] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.068695] audit: initializing netlink subsys (disabled)
[ 0.069173] audit: type=2000 audit(0.066:1): state=initialized audit_enabled=0 res=1
[ 0.070850] thermal_sys: Registered thermal governor 'fair_share'
[ 0.070868] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.070876] thermal_sys: Registered thermal governor 'step_wise'
[ 0.070882] thermal_sys: Registered thermal governor 'user_space'
[ 0.070999] cpuidle: using governor ladder
[ 0.071046] cpuidle: using governor menu
[ 0.071268] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.071425] ASID allocator initialised with 65536 entries
[ 0.072373] Serial: AMBA PL011 UART driver
[ 0.078705] /soc/bus@1000000/mixer@100000: Fixed dependency cycle(s) with /soc/tcon-top@6510000
[ 0.078872] /soc/interrupt-controller@3021000: Fixed dependency cycle(s) with /soc/interrupt-controller@3021000
[ 0.079079] /soc/hdmi@6000000: Fixed dependency cycle(s) with /soc/tcon-top@6510000
[ 0.079164] /soc/tcon-top@6510000: Fixed dependency cycle(s) with /soc/hdmi@6000000
[ 0.079196] /soc/tcon-top@6510000: Fixed dependency cycle(s) with /soc/lcd-controller@6515000
[ 0.079229] /soc/tcon-top@6510000: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000
[ 0.079316] /soc/lcd-controller@6515000: Fixed dependency cycle(s) with /soc/tcon-top@6510000
[ 0.080419] /soc/bus@1000000/mixer@100000: Fixed dependency cycle(s) with /soc/tcon-top@6510000
[ 0.084849] /soc/hdmi@6000000: Fixed dependency cycle(s) with /soc/tcon-top@6510000
[ 0.085617] /soc/hdmi@6000000: Fixed dependency cycle(s) with /soc/tcon-top@6510000
[ 0.085778] /soc/bus@1000000/mixer@100000: Fixed dependency cycle(s) with /soc/tcon-top@6510000
[ 0.085894] /soc/tcon-top@6510000: Fixed dependency cycle(s) with /soc/hdmi@6000000
[ 0.086007] /soc/tcon-top@6510000: Fixed dependency cycle(s) with /soc/lcd-controller@6515000
[ 0.086038] /soc/tcon-top@6510000: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000
[ 0.086400] /soc/tcon-top@6510000: Fixed dependency cycle(s) with /soc/lcd-controller@6515000
[ 0.086519] /soc/lcd-controller@6515000: Fixed dependency cycle(s) with /soc/tcon-top@6510000
[ 0.095254] /soc/hdmi@6000000: Fixed dependency cycle(s) with /connector
[ 0.095412] /connector: Fixed dependency cycle(s) with /soc/hdmi@6000000
[ 0.099761] cryptd: max_cpu_qlen set to 1000
[ 0.100844] ACPI: Interpreter disabled.
[ 0.101575] iommu: Default domain type: Translated
[ 0.101597] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.105171] SCSI subsystem initialized
[ 0.105250] libata version 3.00 loaded.
[ 0.105555] usbcore: registered new interface driver usbfs
[ 0.105605] usbcore: registered new interface driver hub
[ 0.105664] usbcore: registered new device driver usb
[ 0.106578] pps_core: LinuxPPS API ver. 1 registered
[ 0.106588] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.106616] PTP clock support registered
[ 0.106970] scmi_core: SCMI protocol bus registered
[ 0.107591] Advanced Linux Sound Architecture Driver Initialized.
[ 0.109299] clocksource: Switched to clocksource arch_sys_counter
[ 1.264644] pnp: PnP ACPI: disabled
[ 1.277952] NET: Registered PF_INET protocol family
[ 1.278256] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 1.347112] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 1.347168] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.347278] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 1.347360] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 1.347631] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.347829] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.347878] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 1.348142] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.349136] RPC: Registered named UNIX socket transport module.
[ 1.349160] RPC: Registered udp transport module.
[ 1.349167] RPC: Registered tcp transport module.
[ 1.349173] RPC: Registered tcp-with-tls transport module.
[ 1.349179] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.349191] NET: Registered PF_XDP protocol family
[ 1.349218] PCI: CLS 0 bytes, default 64
[ 1.349744] Trying to unpack rootfs image as initramfs...
[ 1.357603] kvm [1]: nv: 554 coarse grained trap handlers
[ 1.358468] kvm [1]: IPA Size Limit: 40 bits
[ 1.362185] kvm [1]: vgic interrupt IRQ9
[ 1.362268] kvm [1]: Hyp nVHE mode initialized successfully
[ 1.365769] Initialise system trusted keyrings
[ 1.366320] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 1.367238] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.368005] NFS: Registering the id_resolver key type
[ 1.368079] Key type id_resolver registered
[ 1.368087] Key type id_legacy registered
[ 1.368128] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.368137] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.432380] NET: Registered PF_ALG protocol family
[ 1.432434] Key type asymmetric registered
[ 1.432443] Asymmetric key parser 'x509' registered
[ 1.432451] Asymmetric key parser 'pkcs8' registered
[ 1.432458] Key type pkcs7_test registered
[ 1.432724] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.433146] io scheduler mq-deadline registered
[ 1.433169] io scheduler kyber registered
[ 1.433237] io scheduler bfq registered
[ 1.448275] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.480564] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.486445] Serial: AMBA driver
[ 1.518373] usbcore: registered new interface driver uas
[ 1.518443] usbcore: registered new interface driver usb-storage
[ 1.520054] mousedev: PS/2 mouse device common for all mice
[ 1.522378] sun6i-rtc 7000000.rtc: registered as rtc0
[ 1.522450] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-02T00:00:08 UTC (86408)
[ 1.530084] sdhci: Secure Digital Host Controller Interface driver
[ 1.530108] sdhci: Copyright(c) Pierre Ossman
[ 1.530569] Synopsys Designware Multimedia Card Interface Driver
[ 1.533350] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.536789] SMCCC: SOC_ID: ID = jep106:091e:1823 Revision = 0x00000000
[ 1.543257] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 (0,8000003f) counters available
[ 1.544271] watchdog: NMI not fully supported
[ 1.544290] watchdog: Hard watchdog permanently disabled
[ 1.560010] NET: Registered PF_PACKET protocol family
[ 1.560493] Key type dns_resolver registered
[ 1.577509] registered taskstats version 1
[ 1.578051] Loading compiled-in X.509 certificates
[ 1.581712] zswap: loaded using pool zstd/zsmalloc
[ 1.605540] sun8i-mixer 1100000.mixer: Adding to iommu group 0
[ 1.610387] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 1.624399] sun50i-h616-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
[ 1.626352] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator
[ 1.631481] printk: legacy console [ttyS0] disabled
[ 1.632221] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 286, base_baud = 1500000) is a 16550A
[ 1.632334] printk: legacy console [ttyS0] enabled
[ 1.634474] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pg not found, using dummy regulator
[ 1.636489] 5000400.serial: ttyS1 at MMIO 0x5000400 (irq = 287, base_baud = 1500000) is a 16550A
[ 1.637038] serial serial0: tty port ttyS1 registered
[ 1.642272] phy phy-5100400.phy.0: Changing dr_mode to 1
[ 1.643891] ehci-platform 5200000.usb: EHCI Host Controller
[ 1.643959] ehci-platform 5200000.usb: new USB bus registered, assigned bus number 1
[ 1.644182] ehci-platform 5200000.usb: irq 289, io mem 0x05200000
[ 1.646141] ehci-platform 5310000.usb: EHCI Host Controller
[ 1.646195] ehci-platform 5310000.usb: new USB bus registered, assigned bus number 2
[ 1.646409] ehci-platform 5310000.usb: irq 290, io mem 0x05310000
[ 1.648884] ehci-platform 5311000.usb: EHCI Host Controller
[ 1.648939] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 3
[ 1.649129] ehci-platform 5311000.usb: irq 291, io mem 0x05311000
[ 1.652751] ehci-platform 5200000.usb: USB 2.0 started, EHCI 1.00
[ 1.653247] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 1.653280] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.653291] usb usb1: Product: EHCI Host Controller
[ 1.653300] usb usb1: Manufacturer: Linux 6.12.11-edge-sunxi64 ehci_hcd
[ 1.653309] usb usb1: SerialNumber: 5200000.usb
[ 1.653794] ohci-platform 5200400.usb: Generic Platform OHCI controller
[ 1.653930] usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allowed for exclusive requests (id=vbus)
[ 1.654662] hub 1-0:1.0: USB hub found
[ 1.654764] hub 1-0:1.0: 1 port detected
[ 1.655420] ohci-platform 5200400.usb: new USB bus registered, assigned bus number 4
[ 1.655673] ohci-platform 5200400.usb: irq 293, io mem 0x05200400
[ 1.657364] ohci-platform 5310400.usb: Generic Platform OHCI controller
[ 1.657416] ohci-platform 5310400.usb: new USB bus registered, assigned bus number 5
[ 1.657458] ohci-platform 5311400.usb: Generic Platform OHCI controller
[ 1.657485] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6
[ 1.657621] ohci-platform 5310400.usb: irq 296, io mem 0x05310400
[ 1.657651] ohci-platform 5311400.usb: irq 295, io mem 0x05311400
[ 1.662738] ehci-platform 5310000.usb: USB 2.0 started, EHCI 1.00
[ 1.663180] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 1.663207] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.663218] usb usb2: Product: EHCI Host Controller
[ 1.663227] usb usb2: Manufacturer: Linux 6.12.11-edge-sunxi64 ehci_hcd
[ 1.663236] usb usb2: SerialNumber: 5310000.usb
[ 1.664296] hub 2-0:1.0: USB hub found
[ 1.664393] hub 2-0:1.0: 1 port detected
[ 1.676059] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
[ 1.676529] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 1.676554] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.676564] usb usb3: Product: EHCI Host Controller
[ 1.676574] usb usb3: Manufacturer: Linux 6.12.11-edge-sunxi64 ehci_hcd
[ 1.676583] usb usb3: SerialNumber: 5311000.usb
[ 1.677580] hub 3-0:1.0: USB hub found
[ 1.677671] hub 3-0:1.0: 1 port detected
[ 1.710376] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[ 1.710412] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.710423] usb usb4: Product: Generic Platform OHCI controller
[ 1.710432] usb usb4: Manufacturer: Linux 6.12.11-edge-sunxi64 ohci_hcd
[ 1.710441] usb usb4: SerialNumber: 5200400.usb
[ 1.711497] hub 4-0:1.0: USB hub found
[ 1.711580] hub 4-0:1.0: 1 port detected
[ 1.713753] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[ 1.713786] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.713797] usb usb5: Product: Generic Platform OHCI controller
[ 1.713806] usb usb5: Manufacturer: Linux 6.12.11-edge-sunxi64 ohci_hcd
[ 1.713816] usb usb5: SerialNumber: 5310400.usb
[ 1.714882] hub 5-0:1.0: USB hub found
[ 1.714961] hub 5-0:1.0: 1 port detected
[ 1.715819] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[ 1.715850] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.715861] usb usb6: Product: Generic Platform OHCI controller
[ 1.715870] usb usb6: Manufacturer: Linux 6.12.11-edge-sunxi64 ohci_hcd
[ 1.715879] usb usb6: SerialNumber: 5311400.usb
[ 1.717008] hub 6-0:1.0: USB hub found
[ 1.717104] hub 6-0:1.0: 1 port detected
[ 2.171103] Freeing initrd memory: 15120K
[ 2.642739] ehci-platform 5101000.usb: EHCI Host Controller
[ 2.642775] ohci-platform 5101400.usb: Generic Platform OHCI controller
[ 2.642826] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 8
[ 2.642826] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 7
[ 2.643037] ehci-platform 5101000.usb: irq 288, io mem 0x05101000
[ 2.643064] ohci-platform 5101400.usb: irq 292, io mem 0x05101400
[ 2.652664] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
[ 2.653036] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 2.653051] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.653062] usb usb7: Product: EHCI Host Controller
[ 2.653071] usb usb7: Manufacturer: Linux 6.12.11-edge-sunxi64 ehci_hcd
[ 2.653080] usb usb7: SerialNumber: 5101000.usb
[ 2.654032] hub 7-0:1.0: USB hub found
[ 2.654096] hub 7-0:1.0: 1 port detected
[ 2.700245] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[ 2.700276] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.700287] usb usb8: Product: Generic Platform OHCI controller
[ 2.700297] usb usb8: Manufacturer: Linux 6.12.11-edge-sunxi64 ohci_hcd
[ 2.700306] usb usb8: SerialNumber: 5101400.usb
[ 2.701267] hub 8-0:1.0: USB hub found
[ 2.701335] hub 8-0:1.0: 1 port detected
[ 2.859796] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 2.860422] sun50i-h616-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
[ 2.862859] sun50i-h616-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator
[ 2.864513] axp20x-i2c 0-0036: AXP20x variant AXP313a found
[ 2.865313] axp20x-i2c 0-0036: AXP20X driver loaded
[ 2.869396] vdd-dram: Bringing 1100000uV into 1200000-1200000uV
[ 2.870982] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
[ 2.874540] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq
[ 2.875087] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pc not found, using dummy regulator
[ 2.876429] sun4i-drm display-engine: Adding to iommu group 0
[ 2.893018] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_ops)
[ 2.893430] sun4i-drm display-engine: bound 6510000.tcon-top (ops sun8i_tcon_top_ops)
[ 2.894104] sun4i-drm display-engine: bound 6515000.lcd-controller (ops sun4i_tcon_ops)
[ 2.894718] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
[ 2.895637] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
[ 2.897414] sun4i-drm display-engine: bound 6000000.hdmi (ops sun8i_dw_hdmi_ops)
[ 2.898644] [drm] Initialized sun4i-drm 1.0.0 for display-engine on minor 0
[ 2.905598] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
[ 2.905598] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[ 2.921204] mmc3: Failed to initialize a non-removable card
[ 3.182647] usb 8-1: new full-speed USB device number 2 using ohci-platform
[ 3.222685] mmc2: new DDR MMC card at address 0001
[ 3.224099] mmcblk2: mmc2:0001 P1J95K 7.30 GiB
[ 3.228512] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
[ 3.233698] mmcblk2boot0: mmc2:0001 P1J95K 2.00 MiB
[ 3.236961] mmcblk2boot1: mmc2:0001 P1J95K 2.00 MiB
[ 3.367675] Console: switching to colour frame buffer device 240x67
[ 3.390374] usb 8-1: New USB device found, idVendor=413c, idProduct=1003, bcdDevice= 1.00
[ 3.390399] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.390408] usb 8-1: Product: Dell USB Keyboard Hub
[ 3.390415] usb 8-1: Manufacturer: Dell
[ 3.396462] hub 8-1:1.0: USB hub found
[ 3.398356] hub 8-1:1.0: 3 ports detected
[ 3.403781] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
[ 3.411903] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
[ 3.414074] of_cfs_init
[ 3.414132] of_cfs_init: OK
[ 3.438659] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[ 3.487368] mmc0: host does not support reading read-only switch, assuming write-enable
[ 3.489155] mmc0: Problem switching card into high-speed mode!
[ 3.489355] mmc0: new SDHC card at address 21f1
[ 3.490743] mmcblk0: mmc0:21f1 APPSD 7.50 GiB
[ 3.494790] mmcblk0: p1
[ 3.542524] clk: Disabling unused clocks
[ 3.542566] sun50i-h6-r-ccu 7010000.clock: Powering off unused clock r-apb2-rsb
[ 3.542594] sun50i-h616-ccu 3001000.clock: Powering off unused clock bus-i2c3
[ 3.542670] sunxi-de33-clks 1008000.clock: Powering off unused clock wb-div
[ 3.542680] sunxi-de33-clks 1008000.clock: Powering off unused clock mixer1-div
[ 3.542720] sun50i-h616-ccu 3001000.clock: Powering off unused clock bus-pwm
[ 3.542741] sun50i-h616-ccu 3001000.clock: Powering off unused clock bus-emac1
[ 3.542761] sun50i-h616-ccu 3001000.clock: Powering off unused clock bus-ve
[ 3.542769] sun50i-h616-ccu 3001000.clock: Powering off unused clock bus-ce
[ 3.542787] sun50i-h616-ccu 3001000.clock: Powering off unused clock ce
[ 3.542800] sun50i-h616-ccu 3001000.clock: Powering off unused clock mbus-ce
[ 3.542813] sun50i-h616-ccu 3001000.clock: Powering off unused clock cpux-apb
[ 3.542820] sun50i-h616-ccu 3001000.clock: Powering off unused clock axi
[ 3.542835] sun50i-h6-r-ccu 7010000.clock: Powering off unused clock r-apb1-twd
[ 3.542860] PM: genpd: Disabling unused power domains
[ 3.542882] ALSA device list:
[ 3.542889] No soundcards found.
[ 3.549765] Freeing unused kernel memory: 8000K
[ 3.550055] Run /init as init process
[ 3.550065] with arguments:
[ 3.550072] /init
[ 3.550077] splash
[ 3.550082] with environment:
[ 3.550086] HOME=/
[ 3.550091] TERM=linux
[ 3.550095] ubootpart=1709ba65-01
[ 3.550100] cgroup_enable=memory
[ 3.692752] usb 8-1.1: new full-speed USB device number 3 using ohci-platform
[ 3.793527] usb 8-1.1: New USB device found, idVendor=413c, idProduct=2010, bcdDevice= 1.00
[ 3.793563] usb 8-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.793571] usb 8-1.1: Product: Dell USB Keyboard Hub
[ 3.793577] usb 8-1.1: Manufacturer: Dell
[ 3.869405] usb 8-1.3: new low-speed USB device number 4 using ohci-platform
[ 3.911340] hid: raw HID events driver (C) Jiri Kosina
[ 3.935176] usbcore: registered new interface driver usbhid
[ 3.935211] usbhid: USB HID core driver
[ 3.967475] usb 8-1.3: New USB device found, idVendor=03f0, idProduct=134a, bcdDevice= 1.00
[ 3.967518] usb 8-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.967527] usb 8-1.3: Product: HP USB Optical Mouse
[ 3.967533] usb 8-1.3: Manufacturer: PixArt
[ 4.036015] input: Dell Dell USB Keyboard Hub as /devices/platform/soc/5101400.usb/usb8/8-1/8-1.1/8-1.1:1.0/0003:413C:2010.0001/input/input0
[ 4.187165] hid-generic 0003:413C:2010.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-5101400.usb-1.1/input0
[ 4.189062] input: Dell Dell USB Keyboard Hub Consumer Control as /devices/platform/soc/5101400.usb/usb8/8-1/8-1.1/8-1.1:1.1/0003:413C:2010.0002/input/input1
[ 4.240301] input: Dell Dell USB Keyboard Hub System Control as /devices/platform/soc/5101400.usb/usb8/8-1/8-1.1/8-1.1:1.1/0003:413C:2010.0002/input/input2
[ 4.241275] hid-generic 0003:413C:2010.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-5101400.usb-1.1/input1
[ 4.242326] input: PixArt HP USB Optical Mouse as /devices/platform/soc/5101400.usb/usb8/8-1/8-1.3/8-1.3:1.0/0003:03F0:134A.0003/input/input3
[ 4.245341] hid-generic 0003:03F0:134A.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-5101400.usb-1.3/input0
[ 4.335600] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pa not found, using dummy regulator
[ 4.336317] dwmac-sun8i 5030000.ethernet: IRQ eth_wake_irq not found
[ 4.336350] dwmac-sun8i 5030000.ethernet: IRQ eth_lpi not found
[ 4.336360] dwmac-sun8i 5030000.ethernet: IRQ sfty not found
[ 4.336855] dwmac-sun8i 5030000.ethernet: supply phy-io not found, using dummy regulator
[ 4.337363] dwmac-sun8i 5030000.ethernet: PTP uses main clock
[ 4.337432] dwmac-sun8i 5030000.ethernet: Current syscon value is not the default 53fe1 (expect 0)
[ 4.340694] dwmac-sun8i 5030000.ethernet: No HW DMA feature register supported
[ 4.340727] dwmac-sun8i 5030000.ethernet: RX Checksum Offload Engine supported
[ 4.340734] dwmac-sun8i 5030000.ethernet: COE Type 2
[ 4.340744] dwmac-sun8i 5030000.ethernet: TX Checksum insertion supported
[ 4.340750] dwmac-sun8i 5030000.ethernet: Normal descriptors
[ 4.340756] dwmac-sun8i 5030000.ethernet: Chain mode enabled
[ 4.656544] dwmac-sun8i 5030000.ethernet end0: renamed from eth0
[ 5.676500] EXT4-fs (mmcblk0p1): mounted filesystem adc7b539-05e1-42cd-b4a4-263c1693e027 ro with writeback data mode. Quota mode: disabled.
[ 7.290999] systemd[1]: System time before build time, advancing clock.
[ 7.299934] systemd[1]: Failed to find module 'autofs4'
[ 7.404849] NET: Registered PF_INET6 protocol family
[ 7.406580] Segment Routing with IPv6
[ 7.406651] In-situ OAM (IOAM) with IPv6
[ 7.507441] systemd[1]: systemd 252.36-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 7.507517] systemd[1]: Detected architecture arm64.
[ 7.518713] systemd[1]: Hostname set to <x96q-lpddr3>.
[ 7.532309] systemd[1]: Initializing machine ID from random generator.
[ 7.532941] systemd[1]: Installed transient /etc/machine-id file.
[ 8.787575] systemd[1]: /lib/systemd/system/aw859a-wifi.service:9: Support for option SysVStartPriority= has been removed and it is ignored
[ 9.066096] systemd[1]: Queued start job for default target graphical.target.
[ 9.115709] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 9.118998] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 9.121114] systemd[1]: Created slice user.slice - User and Session Slice.
[ 9.121897] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 9.122489] systemd[1]: Starting of proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point unsupported.
[ 9.122951] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0...
[ 9.123354] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 9.123980] systemd[1]: Reached target slices.target - Slice Units.
[ 9.124393] systemd[1]: Reached target swap.target - Swaps.
[ 9.124715] systemd[1]: Reached target time-set.target - System Time Set.
[ 9.125181] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 9.153859] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket.
[ 9.155555] systemd[1]: Listening on syslog.socket - Syslog Socket.
[ 9.157229] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 9.158317] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 9.160567] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 9.161863] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 9.163560] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 9.174815] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 9.176617] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 9.178694] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 9.230140] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 9.239542] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 9.247406] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 9.248830] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[ 9.258760] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[ 9.266973] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 9.275291] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 9.284438] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 9.298121] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 9.308178] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 9.319756] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 9.329221] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 9.340135] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 9.341649] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 9.358269] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 9.369146] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 9.378018] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 9.392841] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 9.395185] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 9.397317] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 9.399035] fuse: init (API version 7.41)
[ 9.402299] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[ 9.408590] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 9.414717] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 9.416649] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 9.421304] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 9.423219] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 9.427549] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 9.428875] loop: module loaded
[ 9.430770] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 9.434794] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 9.435928] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 9.438805] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 9.441526] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 9.444086] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 9.445303] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 9.483701] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 9.494828] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 9.495829] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 9.504700] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 9.506983] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 9.511814] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 9.529183] EXT4-fs (mmcblk0p1): re-mounted adc7b539-05e1-42cd-b4a4-263c1693e027 r/w. Quota mode: disabled.
[ 9.540338] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 9.557415] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 9.560346] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 9.567747] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
[ 9.577404] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[ 9.631572] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[ 9.680103] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[ 9.700560] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[ 9.786179] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 9.809458] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[ 9.811050] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[ 9.837183] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[ 10.132786] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices.
[ 10.153759] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization...
[ 10.155208] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files.
[ 10.171427] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen...
[ 10.324770] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen.
[ 10.327210] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
[ 10.328206] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch.
[ 10.328824] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 10.366219] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0.
[ 10.443448] systemd[1]: Mounting tmp.mount - /tmp...
[ 10.474694] systemd[1]: Mounted tmp.mount - /tmp.
[ 10.477641] systemd[1]: Reached target local-fs.target - Local File Systems.
[ 10.490995] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config...
[ 10.502306] systemd[1]: Starting console-setup.service - Set console font and keymap...
[ 10.513376] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data...
[ 10.533951] systemd[1]: systemd-binfmt.service - Set Up Additional Binary Formats was skipped because of an unmet condition check (ConditionPathIsMountPoint=/proc/sys/fs/binfmt_misc).
[ 10.563759] systemd[1]: Received SIGRTMIN+20 from PID 141 (plymouthd).
[ 10.589551] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data.
[ 11.326056] random: crng init done
[ 11.472969] zram: Added device: zram0
[ 11.501246] zram: Added device: zram1
[ 11.509968] zram: Added device: zram2
[ 13.039809] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget.
[ 13.063290] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 13.188176] mc: Linux media interface: v0.10
[ 13.253093] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
[ 13.255296] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
[ 13.263784] ahub_dam-snd-soc-dummy-dai: substream ahub_dam-snd-soc-dummy-dai has no playback, no capture
[ 13.263830] sunxi-snd-mach soc:ahub_dam_mach: ASoC: can't create pcm ahub_dam-snd-soc-dummy-dai :-22
[ 13.264186] sunxi-snd-mach soc:ahub_dam_mach: probe with driver sunxi-snd-mach failed with error -22
[ 13.269834] panfrost 1800000.gpu: clock rate = 432000000
[ 13.269890] panfrost 1800000.gpu: bus_clock rate = 200000000
[ 13.273844] panfrost 1800000.gpu: mali-g31 id 0x7093 major 0x0 minor 0x0 status 0x0
[ 13.273882] panfrost 1800000.gpu: features: 00000000,000027f7, issues: 00000000,00000400
[ 13.273892] panfrost 1800000.gpu: Features: L2:0x07100206 Shader:0x00000000 Tiler:0x00000209 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7
[ 13.273903] panfrost 1800000.gpu: shader_present=0x1 l2_present=0x1
[ 13.284970] [drm] Initialized panfrost 1.2.0 for 1800000.gpu on minor 1
[ 13.303840] systemd[1]: Starting systemd-machine-id-commit.service - Commit a transient machine-id on disk...
[ 13.493329] Bluetooth: Core ver 2.22
[ 13.493617] NET: Registered PF_BLUETOOTH protocol family
[ 13.493641] Bluetooth: HCI device and connection manager initialized
[ 13.493674] Bluetooth: HCI socket layer initialized
[ 13.493687] Bluetooth: L2CAP socket layer initialized
[ 13.493746] Bluetooth: SCO socket layer initialized
[ 13.544623] videodev: Linux video capture interface: v2.00
[ 13.554709] Registered IR keymap rc-beelink-gs1
[ 19.640645] IR NEC protocol handler initialized
[ 19.663005] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0
[ 19.663497] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
[ 19.663806] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input4
[ 19.664982] sunxi-ir 7040000.ir: initialized sunXi IR driver
[ 19.688327] zram0: detected capacity change from 0 to 992008
[ 24.259192] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ 24.307216] Bluetooth: HCI UART driver ver 2.3
[ 24.307275] Bluetooth: HCI UART protocol H4 registered
[ 24.307285] Bluetooth: HCI UART protocol BCSP registered
[ 24.307510] Bluetooth: HCI UART protocol LL registered
[ 24.307540] Bluetooth: HCI UART protocol ATH3K registered
[ 24.307674] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 24.308233] Bluetooth: HCI UART protocol Intel registered
[ 24.309588] hci_uart_bcm serial0-0: setup of GPIO device-wakeup failed: -517
[ 24.310020] Bluetooth: HCI UART protocol Broadcom registered
[ 24.310215] Bluetooth: HCI UART protocol QCA registered
[ 24.310324] Bluetooth: HCI UART protocol Marvell registered
[ 24.334184] Adding 496000k swap on /dev/zram0. Priority:5 extents:1 across:496000k SS
[ 32.016777] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
[ 32.022146] cedrus 1c0e000.video-codec: Adding to iommu group 0
[ 32.024590] cedrus 1c0e000.video-codec: Device registered as /dev/video0
[ 32.027857] hci_uart_bcm serial0-0: setup of GPIO device-wakeup failed: -517
[ 32.085774] zram1: detected capacity change from 0 to 102400
[ 40.552790] systemd[1]: armbian-zram-config.service: start operation timed out. Terminating.
[ 40.557542] systemd[1]: armbian-zram-config.service: Main process exited, code=killed, status=15/TERM
[ 40.558509] systemd[1]: armbian-zram-config.service: Failed with result 'timeout'.
[ 40.560789] systemd[1]: Failed to start armbian-zram-config.service - Armbian ZRAM config.
[ 40.607552] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging...
[ 41.285702] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.
[ 41.290677] systemd[1]: Finished systemd-machine-id-commit.service - Commit a transient machine-id on disk.
[ 42.085251] platform sound-spdif: deferred probe pending: asoc-simple-card: parse error
[ 42.085476] hci_uart_bcm serial0-0: setup of GPIO device-wakeup failed: -517
[ 42.161461] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid).
[ 42.161806] systemd[1]: Starting of proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point unsupported.
[ 42.163819] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 42.200734] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config...
[ 42.220397] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 42.237360] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 42.257587] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 42.260023] systemd[1]: systemd-binfmt.service - Set Up Additional Binary Formats was skipped because of an unmet condition check (ConditionPathIsMountPoint=/proc/sys/fs/binfmt_misc).
[ 42.275448] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization.
[ 42.285658] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[ 42.287986] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[ 42.293825] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 42.300535] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 42.307205] systemd[1]: modprobe@loop.service: Deactivated successfully.
[ 42.308915] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[ 42.353396] systemd[1]: Starting brltty.service - Braille Device Support...
[ 42.354256] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
[ 42.354896] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 42.617401] zram2: detected capacity change from 0 to 992008
[ 42.668120] Adding 496000k swap on /dev/zram2. Priority:5 extents:1 across:496000k SS
[ 42.705025] zram: Added device: zram3
[ 42.771250] zram3: detected capacity change from 0 to 102400
[ 42.843419] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config.
[ 43.075807] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging.
[ 43.117222] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 43.549216] systemd[1]: Started brltty.service - Braille Device Support.
[ 43.601315] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input5
[ 43.602007] systemd[1]: Started systemd-journald.service - Journal Service.
[ 43.726191] systemd-journald[480]: Received client request to flush runtime journal.
[ 124.562914] EXT4-fs (mmcblk0p1): resizing filesystem from 1185792 to 1924096 blocks
[ 126.533018] EXT4-fs (mmcblk0p1): resized filesystem to 1924096
[ 183.983018] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 184.017032] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 184.017964] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 184.077310] **********************************************************
[ 184.077315] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 184.077319] ** **
[ 184.077323] ** trace_printk() being used. Allocating extra memory. **
[ 184.077327] ** **
[ 184.077330] ** This means that this is a DEBUG kernel and it is **
[ 184.077334] ** unsafe for production use. **
[ 184.077338] ** **
[ 184.077342] ** If you see this message and you are not debugging **
[ 184.077346] ** the kernel, report this immediately to your vendor! **
[ 184.077350] ** **
[ 184.077354] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 184.077357] **********************************************************
[ 184.110553] WCN: marlin_init entry!
[ 184.111730] WCN: wcn config bt wake host
[ 184.112213] WCN_ERR: dts node for bt_wake not found
[ 184.112236] WCN: marlin2 parse_dt some para not config
[ 184.112265] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840
[ 184.118837] sdiohal:sdiohal_init ok
[ 184.125265] WCN: marlin_probe ok!
[ 184.132054] hci_uart_bcm serial0-0: setup of GPIO device-wakeup failed: -517
[ 184.229635] WCN: start_marlin [MARLIN_WIFI]
[ 184.229680] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1
[ 184.229694] WCN: the first power on start
[ 184.332674] WCN: marlin chip en dummy pull up -- need manually set GPIO
[ 184.356038] sdiohal:sdiohal_scan_card
[ 184.534890] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[ 185.233336] systemd-journald[480]: Received client request to relinquish /var/log/journal/4a30f185f8cf4182b75beed1259d890a access.
[ 185.933778] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 185.933816] Bluetooth: BNEP filters: protocol multicast
[ 185.933844] Bluetooth: BNEP socket layer initialized
[ 186.936103] sdiohal err:wait scan card time out
[ 190.136029] WCN_ERR: wait SDIO rescan card time out
[ 190.136066] WCN_ERR: chip power on fail
[ 190.136075] sdiohal:sdiohal_runtime_put entry
[ 190.136082] sdiohal err:sdiohal_runtime_put line 1756 not have card
[ 190.168436] sdiohal err:sdiohal_tx_thread line 152 not have card
[ 193.336022] sprdwl:[WIFI_CMD_SYNC_VERSION]timeout
[ 193.336066] sprdwl:ctx_id:0 cmd: WIFI_CMD_SYNC_VERSION[9] rsp timeout (mstime = 190165), num=1
[ 193.336091] sprdwl:SYNC CMD ERROR!!
[ 193.336237] sprdwl:sprdwl_tx_deinit cmd not yet transmited, cmd_send:1, cmd_poped:0
[ 195.138463] dwmac-sun8i 5030000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 195.141410] dwmac-sun8i 5030000.ethernet end0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL)
[ 195.141475] dwmac-sun8i 5030000.ethernet end0: No Safety Features support found
[ 195.141489] dwmac-sun8i 5030000.ethernet end0: No MAC Management Counters available
[ 195.141498] dwmac-sun8i 5030000.ethernet end0: PTP not supported by HW
[ 195.145723] hci_uart_bcm serial0-0: setup of GPIO device-wakeup failed: -517
[ 195.148537] dwmac-sun8i 5030000.ethernet end0: configuring for phy/rmii link mode
[ 198.190763] dwmac-sun8i 5030000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 202.557187] sprdwl:sprdwl_msg_deinit ref not ok! wait for pop!
[ 205.581021] unisoc_wifi unisoc_wifi: probe with driver unisoc_wifi failed with error -1
[ 261.451914] systemd-journald[480]: Received client request to flush runtime journal.
[ 357.759123] systemd-journald[480]: Received client request to relinquish /var/log/journal/4a30f185f8cf4182b75beed1259d890a access.
[ 476.858514] dwmac-sun8i 5030000.ethernet end0: Link is Down
[ 479.900088] dwmac-sun8i 5030000.ethernet end0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 625.780074] hdmi-audio-codec hdmi-audio-codec.5.auto: Only one simultaneous stream supported!
[ 625.780137] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -22