Alright so I am trying to use this OLED display: https://www.amazon.com/AITRIP-Display-SSD1306-3-3V-5V-Arduino/dp/B08JPYJ35Y?th=1 with Armbian(minimal) on my orange pi zero 2w, but I just cant get the i2c1 bus to detect it.
Here's some more details:
uname -r returns: 6.12.23-current-sunxi64
cat /boot/armbianEnv.txt returns:
verbosity=1
bootlogo=false
console=both
disp_mode=1920x1080p60
overlay_prefix=sun50i-h616
rootdev=UUID=adb61282-df86-4116-9688-e94c56913687
rootfstype=ext4
overlays=i2c0-pi i2c1-pi
param_i2c1_pin_sda=3
param_i2c1_pin_scl=5
user_overlays=
usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
sudo i2cdetect -l returns:
i2c-0 i2c DesignWare HDMI I2C adapter
i2c-1 i2c mv64xxx_i2c adapter I2C adapter
i2c-2 i2c mv64xxx_i2c adapter I2C adapter
i2c-3 i2c mv64xxx_i2c adapter I2C adapter
i2c-4 i2c mv64xxx_i2c adapter I2C adapter
sudo i2cdetect -y 1 returns:
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- UU -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
Here's a picture of the display:
Here's a picture of the pin layout:
VCC is going to 3.3v, GND to GND, SDA to pin 3, and SCK to pin 5
Thanks!
Feel free to ask for more details!
