[Armbian for H313 X96-Q LPDDR3 TV-Box]

Ok then i will try with S905W images. Does these boot of an sd card like on the H313 ones ?

[Armbian for H313 X96-Q LPDDR3 TV-Box]

Hi everyone

 

I Have an different Version of this Clones.

 

The Cpu is has an weird printing. It has S905W engraved but DeviceInfoHW shows an CortexA53. Maybe an H313?

 

Version 1.4

 

Not booting from SD Card from many Version of armbian tested with an genue Sandisk 16gb.

 

Serial Output on normal Android boot:

 

Spoiler

GXLX2:BL1:3cfee7:42a5ae;FEAT:ADFD318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 113598

BL2 Built : 17:21:16, Mar 19 2021.
gxl g767b31d - longyong.chen@droid02-sz

Board ID = 7, adc=578
set vcck to 1070 mv
set vddee to 1070 mv
CPU clk: 1200MHz
LPDDR3
LPDDR3 chl: Rank0+1 @ 720MHz - FAIL
LPDDR3 chl: Rank0 @ 720MHz
bist_test rank: 0 30 12 4f 3f 20 5f 31 11 52 3b 19 5d 38 1c 55 3b 1c 5b 34 10 59                                             3c 18 61 598   - PASS

Rank0: 1024MB(auto)-2T-3
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x00007600
Load bl301 from eMMC, src: 0x00018200, des: 0x01380000, size: 0x00002400
Load bl31 from eMMC, src: 0x0001c200, des: 0x10100000, size: 0x00019600
Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x0004da00
NOTICE:  BL3-1: v1.0(debug):98abdeb4b
NOTICE:  BL3-1: Built : 13:55:40, Oct 30 2020
NOTICE:  BL31: GXL normal boot!
NOTICE:  BL31: BL33 decompress pass
[Image: gxl_v1.1.3103-923400455-dirty 2020-12-28 18:42:52 xingyu.chen@droid12-sz                                            ]
efuse init ops = c5
efuse init hdcp = c, cf9=7
x2_hp_e = 0
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: 0 0 3 c c 0 8f b3 a8 a0 0 c5 not ES chip
[0.710060 Inits done]
INFO:    BL3-1: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL3-1: Preparing for EL3 exit to normal world
INFO:    BL3-1: Next image address = 0x1000000
INFO:    BL3-1: Next image spsr = 0x3c9

U-Boot 2015.01-g0d95d91cc4-dirty (Feb 21 2023 - 16:35:00), Build: jenkins-S905L3                                            -default-359

DRAM:  1 GiB
Relocation Offset is: 36edf000
gpio: pin GPIODV_25 (gpio 44) value is 1
register usb cfg[0][1] = 0000000037f5d370
[CANVAS]canvas init
vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters
vpu: clk_level = 7
vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
vpp: vpp_init
MMC:   aml_priv->desc_buf = 0x0000000033ecfac0
aml_priv->desc_buf = 0x0000000033ed1de0
SDIO Port B: 0, SDIO Port 😄 1
emmc/sd response timeout, cmd8, status=0x3ff2800
emmc/sd response timeout, cmd55, status=0x3ff2800
init_part() 293: PART_TYPE_AML
[mmc_init] mmc init success
dtb magic 00088b1f
      Amlogic multi-dtb tool
      GZIP format, decompress...
      Multi dtb detected
      2layers board, board id use 7
      Multi dtb tool version: v2 .
      Support 6 dtbs.
        aml_dt soc: gxlx2 platform: p291 variant: 1g
        dtb 0 soc: gxlx2   plat: p291   vari: 1g
        dtb 1 soc: gxlx2   plat: p291   vari: 2g
        dtb 2 soc: gxlx2   plat: p291   vari: 3g
        dtb 3 soc: gxlx2   plat: p295   vari: 1g
        dtb 4 soc: gxlx2   plat: p295   vari: 2g
        dtb 5 soc: gxlx2   plat: p295   vari: 3g
      Find match dtb: 0
start dts,buffer=0000000033ed4610,dt_addr=0000000033ed4610
      Amlogic multi-dtb tool
      Single dtb detected
parts: 17
00:      logo   0000000000800000 1
01:  recovery   0000000001800000 1
02:      misc   0000000000800000 1
03:      dtbo   0000000000800000 1
04:  cri_data   0000000000800000 2
05:     param   0000000001000000 2
06:      boot   0000000001000000 1
07:       rsv   0000000001000000 1
08:  metadata   0000000001000000 1
09:    vbmeta   0000000000200000 1
10:       tee   0000000002000000 1
11:    vendor   0000000014000000 1
12:       odm   0000000008000000 1
13:    system   0000000080000000 1
14:   product   0000000008000000 1
15:     cache   0000000040000000 2
16:      data   ffffffffffffffff 4
init_part() 293: PART_TYPE_AML
eMMC/TSD partition table have been checked OK!
check pattern success
mmc env offset: 0x47400000
In:    serial
Out:   serial
Err:   serial
board id is : 7
hpd_state=0
do_hpd_detect: hdmimode=1080p60hz
do_hpd_detect: colorattribute=444,8bit
cvbs performance type = 7, table = 2
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-924: calc f46d4e8, store f46d4e8
_verify_dtb_checksum()-924: calc f46d4e8, store f46d4e8
dtb_read()-1046: total valid 2
dtb_read()-1113: do nothing
      Amlogic multi-dtb tool
      GZIP format, decompress...
      Multi dtb detected
      2layers board, board id use 7
      Multi dtb tool version: v2 .
      Support 6 dtbs.
        aml_dt soc: gxlx2 platform: p291 variant: 1g
        dtb 0 soc: gxlx2   plat: p291   vari: 1g
        dtb 1 soc: gxlx2   plat: p291   vari: 2g
        dtb 2 soc: gxlx2   plat: p291   vari: 3g
        dtb 3 soc: gxlx2   plat: p295   vari: 1g
        dtb 4 soc: gxlx2   plat: p295   vari: 2g
        dtb 5 soc: gxlx2   plat: p295   vari: 3g
      Find match dtb: 0
Net:   eth_initialize:396 dwmac.c9410000 idx:0
amlkey_init() enter!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0

wipe_data=successful
wipe_cache=successful
ext4logoLoadCmd=ext4load mmc 1:${logoPart} ${logoLoadAddr} ${ext4LogoPath}
4147272 bytes read in 121 ms (32.7 MiB/s)
[imgread]load bmp from ext4 part okay
bmp pixel: 16
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3f800000
[OSD]load fb addr from dts
[OSD]fb_addr for logo: 0x3f800000
[CANVAS]addr=0x3f800000 width=3840, height=2160
[OSD]ERR: 16 bit/pixel mode2, but BMP has 16 bit/pixel
upgrade_step=2
amlkey_init() enter!
amlkey_init() 70: already init!
[EFUSE_MSG]keynum is 4
[BL31]: tee size: 0
[KM]Error:f[key_manage_query_size]L507:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet
[KM]Error:f[key_manage_query_size]L507:key[cmei] not programed yet
[KM]Error:f[key_manage_query_size]L507:key[authkey] not programed yet
syntax error
Hit any key to stop autoboot:  0
ee_gate_off ...
## Booting Android Image at 0x01080000 ...
Kernel command line: androidboot.dtbo_idx=0 buildvariant=userdebug
      Amlogic multi-dtb tool
      Single dtb detected
load dtb from 0x1000000 ......
   Loading Kernel Image ... OK
   kernel loaded at 0x01080000, end = 0x01a03670
   Loading Ramdisk to 09e93000, end 09fff172 ... OK
   Loading Device Tree to 0000000009e81000, end 0000000009e92698 ... OK
fdt_instaboot: get header err

Starting kernel ...

uboot time: 2026952 us
get_dvfs_info 0007
[    0.000000@0]        07400000 - 07500000,     1024 KB, ramoops@0x07400000
[    0.000000@0]        10000000 - 10400000,     4096 KB, linux,secmon
[    0.000000@0]        3f800000 - 40000000,     8192 KB, linux,meson-fb
[    0.000000@0]        2b400000 - 30000000,    77824 KB, linux,ion-dev
[    0.000000@0]        1b000000 - 2b400000,   266240 KB, linux,codec_mm_cma
[    0.000000@0]        3f800000 - 3f800000,        0 KB, linux,codec_mm_reserve                                            d
[    0.000000@0]        19c00000 - 1b000000,    20480 KB, linux,vdin1_cma

 

Have somebody an idea what iam missing ? 

The Rkdumper tool will not find this device. 

 

Thanks