gnutux landia
-
Posts
15 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by gnutux landia
-
-
Now seems that boots, I just need to touch the metal part of power button when click to give power and then starts to message events.
[ 27.438701@2] dhd_dbg_set_event_log_tag set log tag iovar failed -23 [ 27.442840@2] dhd_dbg_set_event_log_tag set log tag iovar failed -23 [ 27.449129@1] dhd_dbg_set_event_log_tag set log tag iovar failed -23 [ 27.455380@2] dhd_dbg_set_event_log_tag set log tag iovar failed -23 [ 27.461729@2] dhd_dbg_set_event_log_tag set log tag iovar failed -23 [ 27.467993@3] dhd_dbg_set_event_log_tag set log tag iovar failed -23 [ 27.474575@3] dhd_dbg_set_event_log_tag set log tag iovar failed -23 [ 27.480723@3] dhd_dbg_set_event_log_tag set log tag iovar failed -23 [ 27.487114@3] dhd_dbg_set_event_log_tag set log tag iovar failed -23 [ 27.493447@3] dhd_dbg_set_event_log_tag set log tag iovar failed -23 [ 27.499798@1] dhd_dbg_set_event_log_tag set log tag iovar failed -23 [ 27.506161@1] dhd_dbg_set_event_log_tag set log tag iovar failed -23 [ 27.512469@1] dhd_dbg_set_event_log_tag set log tag iovar failed -23 [ 27.521394@3] dhd_dbg_attach_pkt_monitor, 1501 [ 27.526673@3] net_os_enable_packet_filter: val = 0 [ 27.530649@2] net_os_rxfilter_add_remove: add_remove = 0, num = 2 [ 27.536809@3] net_os_enable_packet_filter: val = 1 [ 27.541011@3] net_os_enable_packet_filter: val = 0 [ 27.544909@3] net_os_rxfilter_add_remove: add_remove = 0, num = 3 [ 27.551271@0] net_os_enable_packet_filter: val = 1 [ 27.555831@1] dhd_set_suspend: Remove extra suspend setting [ 27.560882@1] dhd_enable_packet_filter: enter, value = 0 [ 27.622938@2] init: [libfs_mgr]Unable to open zram conf comp device /sys/block/zram0/max_comp_streams [ 30.111457@3] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 0, bssidx: 0 [ 34.581269@1] [dhd-wlan0] wl_cfg80211_connect : Connecting with 3c:47:11:4d:2a:ff ssid "WiFi_2AFF", len (9), sec=wpa2psk/tkipaes, channel=1 [ 34.581269@1] [ 34.612484@0] dhd_dbg_start_pkt_monitor, 1621 [ 34.612522@0] __dhd_dbg_free_tx_pkts, 1412 [ 34.615294@0] __dhd_dbg_free_rx_pkts, 1431 [ 34.638471@3] [dhd-wlan0] wl_iw_event : Link UP with 3c:47:11:4d:2a:ff [ 34.639572@3] [dhd-wlan0] wl_ext_iapsta_event : [S] Link UP with 3c:47:11:4d:2a:ff [ 34.649918@2] [dhd-wlan0] wl_bss_connect_done : Report connect result - connection succeeded [ 34.685204@1] [dhd-wlan0] wl_add_keyext : key index (0) [ 34.743323@2] dhd_dev_apf_get_version: firmware doesn't support APF [ 34.743986@2] dhd_dev_apf_get_max_len: firmware doesn't support APF [ 34.816935@0] dhd_ndo_remove_ip_by_type: failed, retcode = -14 [ 34.817143@0] dhd_dev_ndo_cfg: failed to update host ip addr: -14 [ 34.856175@0] net_os_enable_packet_filter: val = 0 [ 34.858467@0] net_os_rxfilter_add_remove: add_remove = 1, num = 2 [ 34.871997@0] net_os_enable_packet_filter: val = 1 [ 34.973661@2] dhd_set_suspend: Remove extra suspend setting [ 34.976808@2] dhd_enable_packet_filter: enter, value = 0 [ 35.068208@0] dhd_arp_get_arp_hostip_table: ioctl WLC_GET_VAR error -23 [ 35.070340@1] dhd_aoe_hostip_clr failed code -23 [ 35.076591@1] aoe_update_host_ipv4_table failed [ 50.164518@1] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 1, bssidx: 0 [ 50.945561@3] audit: audit_lost=13 audit_rate_limit=5 audit_backlog_limit=64 [ 50.946974@3] audit: rate limit exceeded [ 53.223909@1] audit: audit_lost=15 audit_rate_limit=5 audit_backlog_limit=64 [ 53.225408@1] audit: rate limit exceeded [ 54.252938@1] audit: audit_lost=28 audit_rate_limit=5 audit_backlog_limit=64 [ 54.254399@1] audit: rate limit exceeded [ 82.286034@3] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 2, bssidx: 0 [ 94.451441@3] dhd_dbg_monitor_get_tx_pkts, 1913 [ 94.451532@3] dhd_dbg_monitor_get_tx_pkts(): no tx_status in tx completion messages, make sure that 'd11status' is enabled in firmware, status_pos=0 [ 94.466807@2] dhd_dbg_monitor_get_rx_pkts, 2010 [ 122.294218@3] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 3, bssidx: 0 -
Now appear this on terminal.
-
I improvise a solder points and connect cables to tx, rx, ground, where tx goes to rx and rx goes to tx, but the result is the same, putty terminal only has a blinking cursor.
-
-
Change the dp dm and gave this.
sudo dmesg | grep tty [ 0.471034] console [tty0] enabled [ 633.797008] usb 1-1.4.1.3: cp210x converter now attached to ttyUSB0 [ 1159.103497] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 2713.702725] usb 1-1.4.1.2: cp210x converter now attached to ttyUSB0 [ 3812.350749] cp210x ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [ 3812.351220] cp210x ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [ 3812.447580] cp210x ttyUSB0: failed set request 0x12 status: -19 [ 3812.447593] cp210x ttyUSB0: failed set request 0x0 status: -19 [ 3812.447923] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 4077.235990] usb 1-1.4.1.2: cp210x converter now attached to ttyUSB0 [ 4098.361943] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 5224.734896] usb 1-1.4.1.3: cp210x converter now attached to ttyUSB0 [ 5248.927091] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 5250.665687] usb 1-1.4.1.3: cp210x converter now attached to ttyUSB0 [ 5600.550201] cp210x ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [ 5600.550539] cp210x ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [ 5601.154463] cp210x ttyUSB0: failed set request 0x12 status: -19 [ 5601.154476] cp210x ttyUSB0: failed set request 0x0 status: -19 [ 5601.154818] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 5725.698091] usb 1-1.4.1.3: cp210x converter now attached to ttyUSB0 GNU/LinuxWhen pass → sudo screen /dev/ttyUSB0 115200
Only has cursor blinking.
-
Any idea about this →
sudo dmesg | grep tty [ 0.471034] console [tty0] enabled [ 633.797008] usb 1-1.4.1.3: cp210x converter now attached to ttyUSB0 [ 1159.103497] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 2713.702725] usb 1-1.4.1.2: cp210x converter now attached to ttyUSB0 [ 3812.350749] cp210x ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [ 3812.351220] cp210x ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32 [ 3812.447580] cp210x ttyUSB0: failed set request 0x12 status: -19 [ 3812.447593] cp210x ttyUSB0: failed set request 0x0 status: -19 [ 3812.447923] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [ 4077.235990] usb 1-1.4.1.2: cp210x converter now attached to ttyUSB0 [ 4098.361943] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 GNU/Linuxsudo screen /dev/ttyUSB0 115200. [screen is terminating] -
-
I record a video of the board to see if with this info I don't need to read the outputs via uart.
Can't find how to up images.
What uart cable I need ?
Can you post one from aliexpress.
Thanks.
-
2 hours ago, SteeMan said:
At this point you seem to have done everything properly. The next step would be to find the uart connection point on you board and hook up a usb-uart reader so you can see the debug output from uboot to see what is happening.
I don't have the usb that you mention.
I open the console to clean the fan and I did photos of board but I don' t remember where I place the photos.
Give me five minutes to put here photos I need to unmount the box.
-
I follow this instructions
The reset button in the case of my box is inside Av connection, I already boot the images with press the button and maintain IT.
The result is a screen with HKSERIES screen, I can wait one hour nothing happens only the image.
A video to you see that I press the reset multiboot button.
Thanks.
-
I don't use multiboot.
I test also to put the sd-card on the SD-Card of box and with armbian images (both - xfce bookworm or the last version Xfce of the armbian site) don't work.
I test images separately, I erase the SD-Card and then try the other version image, One by One. With the steps that I already mention above.
I think that I can write documents on the device and system if that boot apps like Office should work I think but I only can test it if the system armbian boot.
Thanks.
-
I decompile the dtb [meson-sm1-sei610.dtb] to dts any idea if I can edit some option on it ?
Spoiler/dts-v1/;
/ {
interrupt-parent = < 0x01 >;
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
compatible = "seirobotics,sei610\0amlogic,sm1";
model = "SEI Robotics SEI610";aliases {
mmc0 = "/soc/sd@ffe05000";
mmc1 = "/soc/mmc@ffe07000";
mmc2 = "/soc/sd@ffe03000";
serial0 = "/soc/bus@ff800000/serial@3000";
ethernet0 = "/soc/ethernet@ff3f0000";
};chosen {
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges;
stdout-path = "serial0:115200n8";framebuffer-cvbs {
compatible = "amlogic,simple-framebuffer\0simple-framebuffer";
amlogic,pipeline = "vpu-cvbs";
clocks = < 0x02 0xa8 0x02 0x35 0x02 0x3a >;
status = "disabled";
power-domains = < 0x03 0x00 >;
phandle = < 0x5e >;
};framebuffer-hdmi {
compatible = "amlogic,simple-framebuffer\0simple-framebuffer";
amlogic,pipeline = "vpu-hdmi";
clocks = < 0x02 0xa8 0x02 0x35 0x02 0x3a >;
status = "disabled";
power-domains = < 0x03 0x00 >;
phandle = < 0x5f >;
};
};efuse {
compatible = "amlogic,meson-gxbb-efuse";
clocks = < 0x02 0x6a >;
#address-cells = < 0x01 >;
#size-cells = < 0x01 >;
read-only;
secure-monitor = < 0x04 >;
phandle = < 0x60 >;
};opp-table-gpu {
compatible = "operating-points-v2";
phandle = < 0x37 >;opp-124999998 {
opp-hz = < 0x00 0x773593e >;
opp-microvolt = < 0xc3500 >;
};opp-249999996 {
opp-hz = < 0x00 0xee6b27c >;
opp-microvolt = < 0xc3500 >;
};opp-285714281 {
opp-hz = < 0x00 0x1107a769 >;
opp-microvolt = < 0xc3500 >;
};opp-399999994 {
opp-hz = < 0x00 0x17d783fa >;
opp-microvolt = < 0xc3500 >;
};opp-499999992 {
opp-hz = < 0x00 0x1dcd64f8 >;
opp-microvolt = < 0xc3500 >;
};opp-666666656 {
opp-hz = < 0x00 0x27bc86a0 >;
opp-microvolt = < 0xc3500 >;
};opp-799999987 {
opp-hz = < 0x00 0x2faf07f3 >;
opp-microvolt = < 0xc3500 >;
};
};psci {
compatible = "arm,psci-1.0";
method = "smc";
};reserved-memory {
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges;secmon@5000000 {
reg = < 0x00 0x5000000 0x00 0x300000 >;
no-map;
phandle = < 0x61 >;
};secmon@5300000 {
reg = < 0x00 0x5300000 0x00 0x2000000 >;
no-map;
phandle = < 0x62 >;
};linux,cma {
compatible = "shared-dma-pool";
reusable;
size = < 0x00 0x10000000 >;
alignment = < 0x00 0x400000 >;
linux,cma-default;
};
};secure-monitor {
compatible = "amlogic,meson-gxbb-sm";
phandle = < 0x04 >;
};soc {
compatible = "simple-bus";
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges;pcie@fc000000 {
compatible = "amlogic,g12a-pcie\0snps,dw-pcie";
reg = < 0x00 0xfc000000 0x00 0x400000 0x00 0xff648000 0x00 0x2000 0x00 0xfc400000 0x00 0x200000 >;
reg-names = "elbi\0cfg\0config";
interrupts = < 0x00 0xdd 0x04 >;
#interrupt-cells = < 0x01 >;
interrupt-map-mask = < 0x00 0x00 0x00 0x00 >;
interrupt-map = < 0x00 0x00 0x00 0x00 0x01 0x00 0xdf 0x04 >;
bus-range = < 0x00 0xff >;
#address-cells = < 0x03 >;
#size-cells = < 0x02 >;
device_type = "pci";
ranges = < 0x81000000 0x00 0x00 0x00 0xfc600000 0x00 0x100000 0x82000000 0x00 0xfc700000 0x00 0xfc700000 0x00 0x1900000 >;
clocks = < 0x02 0x30 0x02 0x2d 0x02 0xc9 >;
clock-names = "general\0pclk\0port";
resets = < 0x05 0x0c 0x05 0x0f >;
reset-names = "port\0apb";
num-lanes = < 0x01 >;
phys = < 0x06 0x02 >;
phy-names = "pcie";
status = "disabled";
power-domains = < 0x03 0x03 >;
phandle = < 0x63 >;
};ethernet@ff3f0000 {
compatible = "amlogic,meson-g12a-dwmac\0snps,dwmac-3.70a\0snps,dwmac";
reg = < 0x00 0xff3f0000 0x00 0x10000 0x00 0xff634540 0x00 0x08 >;
interrupts = < 0x00 0x08 0x04 >;
interrupt-names = "macirq";
clocks = < 0x02 0x26 0x02 0x02 0x02 0x0d 0x02 0x02 >;
clock-names = "stmmaceth\0clkin0\0clkin1\0timing-adjustment";
rx-fifo-depth = < 0x1000 >;
tx-fifo-depth = < 0x800 >;
status = "okay";
power-domains = < 0x03 0x06 >;
phy-handle = < 0x07 >;
phy-mode = "rmii";
phandle = < 0x64 >;mdio {
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
compatible = "snps,dwmac-mdio";
phandle = < 0x10 >;
};
};bus@ff600000 {
compatible = "simple-bus";
reg = < 0x00 0xff600000 0x00 0x200000 >;
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges = < 0x00 0x00 0x00 0xff600000 0x00 0x200000 >;
phandle = < 0x65 >;hdmi-tx@0 {
compatible = "amlogic,meson-g12a-dw-hdmi";
reg = < 0x00 0x00 0x00 0x10000 >;
interrupts = < 0x00 0x39 0x01 >;
resets = < 0x05 0x13 0x05 0x42 0x05 0x4f >;
reset-names = "hdmitx_apb\0hdmitx\0hdmitx_phy";
clocks = < 0x02 0xa8 0x02 0x35 0x02 0x3a >;
clock-names = "isfr\0iahb\0venci";
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
#sound-dai-cells = < 0x00 >;
status = "okay";
pinctrl-0 = < 0x08 0x09 >;
pinctrl-names = "default";
phandle = < 0x18 >;port@0 {
reg = < 0x00 >;
phandle = < 0x66 >;endpoint {
remote-endpoint = < 0x0a >;
phandle = < 0x20 >;
};
};port@1 {
reg = < 0x01 >;
phandle = < 0x67 >;endpoint {
remote-endpoint = < 0x0b >;
phandle = < 0x49 >;
};
};
};bus@30000 {
compatible = "simple-bus";
reg = < 0x00 0x30000 0x00 0x2000 >;
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges = < 0x00 0x00 0x00 0x30000 0x00 0x2000 >;
phandle = < 0x68 >;rng@218 {
compatible = "amlogic,meson-rng";
reg = < 0x00 0x218 0x00 0x04 >;
clocks = < 0x02 0x1b >;
clock-names = "core";
phandle = < 0x69 >;
};
};audio-controller@32000 {
compatible = "amlogic,t9015";
reg = < 0x00 0x32000 0x00 0x14 >;
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "ACODEC";
clocks = < 0x02 0x24 >;
clock-names = "pclk";
resets = < 0x05 0x3d >;
status = "disabled";
phandle = < 0x6a >;
};bus@34400 {
compatible = "simple-bus";
reg = < 0x00 0x34400 0x00 0x400 >;
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges = < 0x00 0x00 0x00 0x34400 0x00 0x400 >;
phandle = < 0x6b >;pinctrl@40 {
compatible = "amlogic,meson-g12a-periphs-pinctrl";
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges;
phandle = < 0x0c >;bank@40 {
reg = < 0x00 0x40 0x00 0x4c 0x00 0xe8 0x00 0x18 0x00 0x120 0x00 0x18 0x00 0x2c0 0x00 0x40 0x00 0x340 0x00 0x1c >;
reg-names = "gpio\0pull\0pull-enable\0mux\0ds";
gpio-controller;
#gpio-cells = < 0x02 >;
gpio-ranges = < 0x0c 0x00 0x00 0x56 >;
phandle = < 0x27 >;
};cec_ao_a_h {
phandle = < 0x17 >;mux {
groups = "cec_ao_a_h";
function = "cec_ao_a_h";
bias-disable;
};
};cec_ao_b_h {
phandle = < 0x19 >;mux {
groups = "cec_ao_b_h";
function = "cec_ao_b_h";
bias-disable;
};
};emmc-ctrl {
phandle = < 0x2f >;mux-0 {
groups = "emmc_cmd";
function = "emmc";
bias-pull-up;
drive-strength-microamp = < 0xfa0 >;
};mux-1 {
groups = "emmc_clk";
function = "emmc";
bias-disable;
drive-strength-microamp = < 0xfa0 >;
};
};emmc-data-4b {
phandle = < 0x6c >;mux-0 {
groups = "emmc_nand_d0\0emmc_nand_d1\0emmc_nand_d2\0emmc_nand_d3";
function = "emmc";
bias-pull-up;
drive-strength-microamp = < 0xfa0 >;
};
};emmc-data-8b {
phandle = < 0x30 >;mux-0 {
groups = "emmc_nand_d0\0emmc_nand_d1\0emmc_nand_d2\0emmc_nand_d3\0emmc_nand_d4\0emmc_nand_d5\0emmc_nand_d6\0emmc_nand_d7";
function = "emmc";
bias-pull-up;
drive-strength-microamp = < 0xfa0 >;
};
};emmc-ds {
phandle = < 0x31 >;mux {
groups = "emmc_nand_ds";
function = "emmc";
bias-pull-down;
drive-strength-microamp = < 0xfa0 >;
};
};emmc_clk_gate {
phandle = < 0x32 >;mux {
groups = "BOOT_8";
function = "gpio_periphs";
bias-pull-down;
drive-strength-microamp = < 0xfa0 >;
};
};hdmitx_ddc {
phandle = < 0x09 >;mux {
groups = "hdmitx_sda\0hdmitx_sck";
function = "hdmitx";
bias-disable;
drive-strength-microamp = < 0xfa0 >;
};
};hdmitx_hpd {
phandle = < 0x08 >;mux {
groups = "hdmitx_hpd_in";
function = "hdmitx";
bias-disable;
};
};i2c0-sda-c {
phandle = < 0x6d >;mux {
groups = "i2c0_sda_c";
function = "i2c0";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c0-sck-c {
phandle = < 0x6e >;mux {
groups = "i2c0_sck_c";
function = "i2c0";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c0-sda-z0 {
phandle = < 0x6f >;mux {
groups = "i2c0_sda_z0";
function = "i2c0";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c0-sck-z1 {
phandle = < 0x70 >;mux {
groups = "i2c0_sck_z1";
function = "i2c0";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c0-sda-z7 {
phandle = < 0x71 >;mux {
groups = "i2c0_sda_z7";
function = "i2c0";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c0-sda-z8 {
phandle = < 0x72 >;mux {
groups = "i2c0_sda_z8";
function = "i2c0";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c1-sda-x {
phandle = < 0x73 >;mux {
groups = "i2c1_sda_x";
function = "i2c1";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c1-sck-x {
phandle = < 0x74 >;mux {
groups = "i2c1_sck_x";
function = "i2c1";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c1-sda-h2 {
phandle = < 0x75 >;mux {
groups = "i2c1_sda_h2";
function = "i2c1";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c1-sck-h3 {
phandle = < 0x76 >;mux {
groups = "i2c1_sck_h3";
function = "i2c1";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c1-sda-h6 {
phandle = < 0x77 >;mux {
groups = "i2c1_sda_h6";
function = "i2c1";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c1-sck-h7 {
phandle = < 0x78 >;mux {
groups = "i2c1_sck_h7";
function = "i2c1";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c2-sda-x {
phandle = < 0x79 >;mux {
groups = "i2c2_sda_x";
function = "i2c2";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c2-sck-x {
phandle = < 0x7a >;mux {
groups = "i2c2_sck_x";
function = "i2c2";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c2-sda-z {
phandle = < 0x7b >;mux {
groups = "i2c2_sda_z";
function = "i2c2";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c2-sck-z {
phandle = < 0x7c >;mux {
groups = "i2c2_sck_z";
function = "i2c2";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c3-sda-h {
phandle = < 0x7d >;mux {
groups = "i2c3_sda_h";
function = "i2c3";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c3-sck-h {
phandle = < 0x7e >;mux {
groups = "i2c3_sck_h";
function = "i2c3";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c3-sda-a {
phandle = < 0x22 >;mux {
groups = "i2c3_sda_a";
function = "i2c3";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c3-sck-a {
phandle = < 0x23 >;mux {
groups = "i2c3_sck_a";
function = "i2c3";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};remote-input {
phandle = < 0x7f >;mux {
groups = "remote_input";
function = "remote_input";
bias-disable;
};
};mclk0-a {
phandle = < 0x80 >;mux {
groups = "mclk0_a";
function = "mclk0";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};mclk1-a {
phandle = < 0x81 >;mux {
groups = "mclk1_a";
function = "mclk1";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};mclk1-x {
phandle = < 0x82 >;mux {
groups = "mclk1_x";
function = "mclk1";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};mclk1-z {
phandle = < 0x83 >;mux {
groups = "mclk1_z";
function = "mclk1";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};nor {
phandle = < 0x84 >;mux {
groups = "nor_d\0nor_q\0nor_c\0nor_cs";
function = "nor";
bias-disable;
};
};pdm-din0-a {
phandle = < 0x85 >;mux {
groups = "pdm_din0_a";
function = "pdm";
bias-disable;
};
};pdm-din0-c {
phandle = < 0x86 >;mux {
groups = "pdm_din0_c";
function = "pdm";
bias-disable;
};
};pdm-din0-x {
phandle = < 0x87 >;mux {
groups = "pdm_din0_x";
function = "pdm";
bias-disable;
};
};pdm-din0-z {
phandle = < 0x13 >;mux {
groups = "pdm_din0_z";
function = "pdm";
bias-disable;
};
};pdm-din1-a {
phandle = < 0x88 >;mux {
groups = "pdm_din1_a";
function = "pdm";
bias-disable;
};
};pdm-din1-c {
phandle = < 0x89 >;mux {
groups = "pdm_din1_c";
function = "pdm";
bias-disable;
};
};pdm-din1-x {
phandle = < 0x8a >;mux {
groups = "pdm_din1_x";
function = "pdm";
bias-disable;
};
};pdm-din1-z {
phandle = < 0x8b >;mux {
groups = "pdm_din1_z";
function = "pdm";
bias-disable;
};
};pdm-din2-a {
phandle = < 0x8c >;mux {
groups = "pdm_din2_a";
function = "pdm";
bias-disable;
};
};pdm-din2-c {
phandle = < 0x8d >;mux {
groups = "pdm_din2_c";
function = "pdm";
bias-disable;
};
};pdm-din2-x {
phandle = < 0x8e >;mux {
groups = "pdm_din2_x";
function = "pdm";
bias-disable;
};
};pdm-din2-z {
phandle = < 0x8f >;mux {
groups = "pdm_din2_z";
function = "pdm";
bias-disable;
};
};pdm-din3-a {
phandle = < 0x90 >;mux {
groups = "pdm_din3_a";
function = "pdm";
bias-disable;
};
};pdm-din3-c {
phandle = < 0x91 >;mux {
groups = "pdm_din3_c";
function = "pdm";
bias-disable;
};
};pdm-din3-x {
phandle = < 0x92 >;mux {
groups = "pdm_din3_x";
function = "pdm";
bias-disable;
};
};pdm-din3-z {
phandle = < 0x93 >;mux {
groups = "pdm_din3_z";
function = "pdm";
bias-disable;
};
};pdm-dclk-a {
phandle = < 0x94 >;mux {
groups = "pdm_dclk_a";
function = "pdm";
bias-disable;
drive-strength-microamp = < 0x1f4 >;
};
};pdm-dclk-c {
phandle = < 0x95 >;mux {
groups = "pdm_dclk_c";
function = "pdm";
bias-disable;
drive-strength-microamp = < 0x1f4 >;
};
};pdm-dclk-x {
phandle = < 0x96 >;mux {
groups = "pdm_dclk_x";
function = "pdm";
bias-disable;
drive-strength-microamp = < 0x1f4 >;
};
};pdm-dclk-z {
phandle = < 0x14 >;mux {
groups = "pdm_dclk_z";
function = "pdm";
bias-disable;
drive-strength-microamp = < 0x1f4 >;
};
};pwm-a {
phandle = < 0x97 >;mux {
groups = "pwm_a";
function = "pwm_a";
bias-disable;
};
};pwm-b-x7 {
phandle = < 0x98 >;mux {
groups = "pwm_b_x7";
function = "pwm_b";
bias-disable;
};
};pwm-b-x19 {
phandle = < 0x99 >;mux {
groups = "pwm_b_x19";
function = "pwm_b";
bias-disable;
};
};pwm-c-c {
phandle = < 0x9a >;mux {
groups = "pwm_c_c";
function = "pwm_c";
bias-disable;
};
};pwm-c-x5 {
phandle = < 0x9b >;mux {
groups = "pwm_c_x5";
function = "pwm_c";
bias-disable;
};
};pwm-c-x8 {
phandle = < 0x9c >;mux {
groups = "pwm_c_x8";
function = "pwm_c";
bias-disable;
};
};pwm-d-x3 {
phandle = < 0x9d >;mux {
groups = "pwm_d_x3";
function = "pwm_d";
bias-disable;
};
};pwm-d-x6 {
phandle = < 0x9e >;mux {
groups = "pwm_d_x6";
function = "pwm_d";
bias-disable;
};
};pwm-e {
phandle = < 0x21 >;mux {
groups = "pwm_e";
function = "pwm_e";
bias-disable;
};
};pwm-f-z {
phandle = < 0x9f >;mux {
groups = "pwm_f_z";
function = "pwm_f";
bias-disable;
};
};pwm-f-a {
phandle = < 0xa0 >;mux {
groups = "pwm_f_a";
function = "pwm_f";
bias-disable;
};
};pwm-f-x {
phandle = < 0xa1 >;mux {
groups = "pwm_f_x";
function = "pwm_f";
bias-disable;
};
};pwm-f-h {
phandle = < 0xa2 >;mux {
groups = "pwm_f_h";
function = "pwm_f";
bias-disable;
};
};sdcard_c {
phandle = < 0x2d >;mux-0 {
groups = "sdcard_d0_c\0sdcard_d1_c\0sdcard_d2_c\0sdcard_d3_c\0sdcard_cmd_c";
function = "sdcard";
bias-pull-up;
drive-strength-microamp = < 0xfa0 >;
};mux-1 {
groups = "sdcard_clk_c";
function = "sdcard";
bias-disable;
drive-strength-microamp = < 0xfa0 >;
};
};sdcard_clk_gate_c {
phandle = < 0x2e >;mux {
groups = "GPIOC_4";
function = "gpio_periphs";
bias-pull-down;
drive-strength-microamp = < 0xfa0 >;
};
};sdcard_z {
phandle = < 0xa3 >;mux-0 {
groups = "sdcard_d0_z\0sdcard_d1_z\0sdcard_d2_z\0sdcard_d3_z\0sdcard_cmd_z";
function = "sdcard";
bias-pull-up;
drive-strength-microamp = < 0xfa0 >;
};mux-1 {
groups = "sdcard_clk_z";
function = "sdcard";
bias-disable;
drive-strength-microamp = < 0xfa0 >;
};
};sdcard_clk_gate_z {
phandle = < 0xa4 >;mux {
groups = "GPIOZ_6";
function = "gpio_periphs";
bias-pull-down;
drive-strength-microamp = < 0xfa0 >;
};
};sdio {
phandle = < 0x2a >;mux {
groups = "sdio_d0\0sdio_d1\0sdio_d2\0sdio_d3\0sdio_clk\0sdio_cmd";
function = "sdio";
bias-disable;
drive-strength-microamp = < 0xfa0 >;
};
};sdio_clk_gate {
phandle = < 0x2b >;mux {
groups = "GPIOX_4";
function = "gpio_periphs";
bias-pull-down;
drive-strength-microamp = < 0xfa0 >;
};
};spdif-in-a10 {
phandle = < 0xa5 >;mux {
groups = "spdif_in_a10";
function = "spdif_in";
bias-disable;
};
};spdif-in-a12 {
phandle = < 0xa6 >;mux {
groups = "spdif_in_a12";
function = "spdif_in";
bias-disable;
};
};spdif-in-h {
phandle = < 0xa7 >;mux {
groups = "spdif_in_h";
function = "spdif_in";
bias-disable;
};
};spdif-out-h {
phandle = < 0xa8 >;mux {
groups = "spdif_out_h";
function = "spdif_out";
drive-strength-microamp = < 0x1f4 >;
bias-disable;
};
};spdif-out-a11 {
phandle = < 0xa9 >;mux {
groups = "spdif_out_a11";
function = "spdif_out";
drive-strength-microamp = < 0x1f4 >;
bias-disable;
};
};spdif-out-a13 {
phandle = < 0xaa >;mux {
groups = "spdif_out_a13";
function = "spdif_out";
drive-strength-microamp = < 0x1f4 >;
bias-disable;
};
};spicc0-x {
phandle = < 0xab >;mux {
groups = "spi0_mosi_x\0spi0_miso_x\0spi0_clk_x";
function = "spi0";
drive-strength-microamp = < 0xfa0 >;
bias-disable;
};
};spicc0-ss0-x {
phandle = < 0xac >;mux {
groups = "spi0_ss0_x";
function = "spi0";
drive-strength-microamp = < 0xfa0 >;
bias-disable;
};
};spicc0-c {
phandle = < 0xad >;mux {
groups = "spi0_mosi_c\0spi0_miso_c\0spi0_ss0_c\0spi0_clk_c";
function = "spi0";
drive-strength-microamp = < 0xfa0 >;
bias-disable;
};
};spicc1 {
phandle = < 0xae >;mux {
groups = "spi1_mosi\0spi1_miso\0spi1_clk";
function = "spi1";
drive-strength-microamp = < 0xfa0 >;
};
};spicc1-ss0 {
phandle = < 0xaf >;mux {
groups = "spi1_ss0";
function = "spi1";
drive-strength-microamp = < 0xfa0 >;
bias-disable;
};
};tdm-a-din0 {
phandle = < 0xb0 >;mux {
groups = "tdm_a_din0";
function = "tdm_a";
bias-disable;
};
};tdm-a-din1 {
phandle = < 0xb1 >;mux {
groups = "tdm_a_din1";
function = "tdm_a";
bias-disable;
};
};tdm-a-dout0 {
phandle = < 0x42 >;mux {
groups = "tdm_a_dout0";
function = "tdm_a";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-a-dout1 {
phandle = < 0xb2 >;mux {
groups = "tdm_a_dout1";
function = "tdm_a";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-a-fs {
phandle = < 0x43 >;mux {
groups = "tdm_a_fs";
function = "tdm_a";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-a-sclk {
phandle = < 0x44 >;mux {
groups = "tdm_a_sclk";
function = "tdm_a";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-a-slv-fs {
phandle = < 0xb3 >;mux {
groups = "tdm_a_slv_fs";
function = "tdm_a";
bias-disable;
};
};tdm-a-slv-sclk {
phandle = < 0xb4 >;mux {
groups = "tdm_a_slv_sclk";
function = "tdm_a";
bias-disable;
};
};tdm-b-din0 {
phandle = < 0xb5 >;mux {
groups = "tdm_b_din0";
function = "tdm_b";
bias-disable;
};
};tdm-b-din1 {
phandle = < 0xb6 >;mux {
groups = "tdm_b_din1";
function = "tdm_b";
bias-disable;
};
};tdm-b-din2 {
phandle = < 0xb7 >;mux {
groups = "tdm_b_din2";
function = "tdm_b";
bias-disable;
};
};tdm-b-din3-a {
phandle = < 0xb8 >;mux {
groups = "tdm_b_din3_a";
function = "tdm_b";
bias-disable;
};
};tdm-b-din3-h {
phandle = < 0xb9 >;mux {
groups = "tdm_b_din3_h";
function = "tdm_b";
bias-disable;
};
};tdm-b-dout0 {
phandle = < 0xba >;mux {
groups = "tdm_b_dout0";
function = "tdm_b";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-b-dout1 {
phandle = < 0xbb >;mux {
groups = "tdm_b_dout1";
function = "tdm_b";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-b-dout2 {
phandle = < 0xbc >;mux {
groups = "tdm_b_dout2";
function = "tdm_b";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-b-dout3-a {
phandle = < 0xbd >;mux {
groups = "tdm_b_dout3_a";
function = "tdm_b";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-b-dout3-h {
phandle = < 0xbe >;mux {
groups = "tdm_b_dout3_h";
function = "tdm_b";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-b-fs {
phandle = < 0xbf >;mux {
groups = "tdm_b_fs";
function = "tdm_b";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-b-sclk {
phandle = < 0xc0 >;mux {
groups = "tdm_b_sclk";
function = "tdm_b";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-b-slv-fs {
phandle = < 0xc1 >;mux {
groups = "tdm_b_slv_fs";
function = "tdm_b";
bias-disable;
};
};tdm-b-slv-sclk {
phandle = < 0xc2 >;mux {
groups = "tdm_b_slv_sclk";
function = "tdm_b";
bias-disable;
};
};tdm-c-din0-a {
phandle = < 0xc3 >;mux {
groups = "tdm_c_din0_a";
function = "tdm_c";
bias-disable;
};
};tdm-c-din0-z {
phandle = < 0xc4 >;mux {
groups = "tdm_c_din0_z";
function = "tdm_c";
bias-disable;
};
};tdm-c-din1-a {
phandle = < 0xc5 >;mux {
groups = "tdm_c_din1_a";
function = "tdm_c";
bias-disable;
};
};tdm-c-din1-z {
phandle = < 0xc6 >;mux {
groups = "tdm_c_din1_z";
function = "tdm_c";
bias-disable;
};
};tdm-c-din2-a {
phandle = < 0xc7 >;mux {
groups = "tdm_c_din2_a";
function = "tdm_c";
bias-disable;
};
};eth-leds {
phandle = < 0xc8 >;mux {
groups = "eth_link_led\0eth_act_led";
function = "eth";
bias-disable;
};
};eth {
phandle = < 0xc9 >;mux {
groups = "eth_mdio\0eth_mdc\0eth_rgmii_rx_clk\0eth_rx_dv\0eth_rxd0\0eth_rxd1\0eth_txen\0eth_txd0\0eth_txd1";
function = "eth";
drive-strength-microamp = < 0xfa0 >;
bias-disable;
};
};eth-rgmii {
phandle = < 0xca >;mux {
groups = "eth_rxd2_rgmii\0eth_rxd3_rgmii\0eth_rgmii_tx_clk\0eth_txd2_rgmii\0eth_txd3_rgmii";
function = "eth";
drive-strength-microamp = < 0xfa0 >;
bias-disable;
};
};tdm-c-din2-z {
phandle = < 0xcb >;mux {
groups = "tdm_c_din2_z";
function = "tdm_c";
bias-disable;
};
};tdm-c-din3-a {
phandle = < 0xcc >;mux {
groups = "tdm_c_din3_a";
function = "tdm_c";
bias-disable;
};
};tdm-c-din3-z {
phandle = < 0xcd >;mux {
groups = "tdm_c_din3_z";
function = "tdm_c";
bias-disable;
};
};tdm-c-dout0-a {
phandle = < 0xce >;mux {
groups = "tdm_c_dout0_a";
function = "tdm_c";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-c-dout0-z {
phandle = < 0xcf >;mux {
groups = "tdm_c_dout0_z";
function = "tdm_c";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-c-dout1-a {
phandle = < 0xd0 >;mux {
groups = "tdm_c_dout1_a";
function = "tdm_c";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-c-dout1-z {
phandle = < 0xd1 >;mux {
groups = "tdm_c_dout1_z";
function = "tdm_c";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-c-dout2-a {
phandle = < 0xd2 >;mux {
groups = "tdm_c_dout2_a";
function = "tdm_c";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-c-dout2-z {
phandle = < 0xd3 >;mux {
groups = "tdm_c_dout2_z";
function = "tdm_c";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-c-dout3-a {
phandle = < 0xd4 >;mux {
groups = "tdm_c_dout3_a";
function = "tdm_c";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-c-dout3-z {
phandle = < 0xd5 >;mux {
groups = "tdm_c_dout3_z";
function = "tdm_c";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-c-fs-a {
phandle = < 0xd6 >;mux {
groups = "tdm_c_fs_a";
function = "tdm_c";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-c-fs-z {
phandle = < 0xd7 >;mux {
groups = "tdm_c_fs_z";
function = "tdm_c";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-c-sclk-a {
phandle = < 0xd8 >;mux {
groups = "tdm_c_sclk_a";
function = "tdm_c";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-c-sclk-z {
phandle = < 0xd9 >;mux {
groups = "tdm_c_sclk_z";
function = "tdm_c";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-c-slv-fs-a {
phandle = < 0xda >;mux {
groups = "tdm_c_slv_fs_a";
function = "tdm_c";
bias-disable;
};
};tdm-c-slv-fs-z {
phandle = < 0xdb >;mux {
groups = "tdm_c_slv_fs_z";
function = "tdm_c";
bias-disable;
};
};tdm-c-slv-sclk-a {
phandle = < 0xdc >;mux {
groups = "tdm_c_slv_sclk_a";
function = "tdm_c";
bias-disable;
};
};tdm-c-slv-sclk-z {
phandle = < 0xdd >;mux {
groups = "tdm_c_slv_sclk_z";
function = "tdm_c";
bias-disable;
};
};uart-a {
phandle = < 0x24 >;mux {
groups = "uart_a_tx\0uart_a_rx";
function = "uart_a";
bias-disable;
};
};uart-a-cts-rts {
phandle = < 0x25 >;mux {
groups = "uart_a_cts\0uart_a_rts";
function = "uart_a";
bias-disable;
};
};uart-b {
phandle = < 0xde >;mux {
groups = "uart_b_tx\0uart_b_rx";
function = "uart_b";
bias-disable;
};
};uart-c {
phandle = < 0xdf >;mux {
groups = "uart_c_tx\0uart_c_rx";
function = "uart_c";
bias-disable;
};
};uart-c-cts-rts {
phandle = < 0xe0 >;mux {
groups = "uart_c_cts\0uart_c_rts";
function = "uart_c";
bias-disable;
};
};
};
};temperature-sensor@34800 {
compatible = "amlogic,g12a-cpu-thermal\0amlogic,g12a-thermal";
reg = < 0x00 0x34800 0x00 0x50 >;
interrupts = < 0x00 0x23 0x01 >;
clocks = < 0x02 0xd4 >;
#thermal-sensor-cells = < 0x00 >;
amlogic,ao-secure = < 0x0d >;
phandle = < 0x38 >;
};temperature-sensor@34c00 {
compatible = "amlogic,g12a-ddr-thermal\0amlogic,g12a-thermal";
reg = < 0x00 0x34c00 0x00 0x50 >;
interrupts = < 0x00 0x24 0x01 >;
clocks = < 0x02 0xd4 >;
#thermal-sensor-cells = < 0x00 >;
amlogic,ao-secure = < 0x0d >;
phandle = < 0x3f >;
};phy@36000 {
compatible = "amlogic,g12a-usb2-phy";
reg = < 0x00 0x36000 0x00 0x2000 >;
clocks = < 0x0e >;
clock-names = "xtal";
resets = < 0x05 0x30 >;
reset-names = "phy";
#phy-cells = < 0x00 >;
phandle = < 0x35 >;
};bus@38000 {
compatible = "simple-bus";
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges = < 0x00 0x00 0x00 0x38000 0x00 0x2000 >;
phandle = < 0xe1 >;video-lut@48 {
compatible = "amlogic,canvas";
reg = < 0x00 0x48 0x00 0x14 >;
phandle = < 0x1f >;
};
};phy@3a000 {
compatible = "amlogic,g12a-usb2-phy";
reg = < 0x00 0x3a000 0x00 0x2000 >;
clocks = < 0x0e >;
clock-names = "xtal";
resets = < 0x05 0x31 >;
reset-names = "phy";
#phy-cells = < 0x00 >;
phandle = < 0x36 >;
};bus@3c000 {
compatible = "simple-bus";
reg = < 0x00 0x3c000 0x00 0x1400 >;
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges = < 0x00 0x00 0x00 0x3c000 0x00 0x1400 >;
phandle = < 0xe2 >;system-controller@0 {
compatible = "amlogic,meson-gx-hhi-sysctrl\0simple-mfd\0syscon";
reg = < 0x00 0x00 0x00 0x400 >;
phandle = < 0xe3 >;clock-controller {
compatible = "amlogic,sm1-clkc";
#clock-cells = < 0x01 >;
clocks = < 0x0e >;
clock-names = "xtal";
phandle = < 0x02 >;
};power-controller {
compatible = "amlogic,meson-sm1-pwrc";
#power-domain-cells = < 0x01 >;
amlogic,ao-sysctrl = < 0x0f >;
resets = < 0x05 0x05 0x05 0x0a 0x05 0x0d 0x05 0x25 0x05 0x85 0x05 0x86 0x05 0x87 0x05 0x89 0x05 0x8c 0x05 0x8d 0x05 0xe7 >;
reset-names = "viu\0venc\0vcbus\0bt656\0rdma\0venci\0vencp\0vdac\0vdi6\0vencl\0vid_lock";
clocks = < 0x02 0x74 0x02 0x7c >;
clock-names = "vpu\0vapb";
assigned-clocks = < 0x02 0x6e 0x02 0x70 0x02 0x74 0x02 0x75 0x02 0x77 0x02 0x7b >;
assigned-clock-parents = < 0x02 0x03 0x00 0x02 0x70 0x02 0x04 0x00 0x02 0x77 >;
assigned-clock-rates = < 0x00 0x27bc86aa 0x00 0x00 0xee6b280 0x00 >;
phandle = < 0x03 >;
};
};
};phy@46000 {
compatible = "amlogic,g12a-usb3-pcie-phy";
reg = < 0x00 0x46000 0x00 0x2000 >;
clocks = < 0x02 0xc9 >;
clock-names = "ref_clk";
resets = < 0x05 0x0e >;
reset-names = "phy";
assigned-clocks = < 0x02 0xc9 >;
assigned-clock-rates = < 0x5f5e100 >;
#phy-cells = < 0x01 >;
phandle = < 0x06 >;
};mdio-multiplexer@4c000 {
compatible = "amlogic,g12a-mdio-mux";
reg = < 0x00 0x4c000 0x00 0xa4 >;
clocks = < 0x02 0x13 0x0e 0x02 0xb1 >;
clock-names = "pclk\0clkin0\0clkin1";
mdio-parent-bus = < 0x10 >;
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
phandle = < 0xe4 >;mdio@0 {
reg = < 0x00 >;
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
phandle = < 0xe5 >;
};mdio@1 {
reg = < 0x01 >;
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
phandle = < 0xe6 >;ethernet-phy@8 {
compatible = "ethernet-phy-id0180.3301\0ethernet-phy-ieee802.3-c22";
interrupts = < 0x00 0x09 0x04 >;
reg = < 0x08 >;
max-speed = < 0x64 >;
phandle = < 0x07 >;
};
};
};bus@60000 {
compatible = "simple-bus";
reg = < 0x00 0x60000 0x00 0x1000 >;
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges = < 0x00 0x00 0x00 0x60000 0x00 0x1000 >;
phandle = < 0xe7 >;clock-controller@0 {
status = "okay";
compatible = "amlogic,sm1-audio-clkc";
reg = < 0x00 0x00 0x00 0xb4 >;
#clock-cells = < 0x01 >;
#reset-cells = < 0x01 >;
clocks = < 0x02 0x25 0x02 0x0b 0x02 0x0c 0x02 0x0d 0x02 0x0e 0x02 0x4a 0x02 0x03 0x02 0x04 0x02 0x05 >;
clock-names = "pclk\0mst_in0\0mst_in1\0mst_in2\0mst_in3\0mst_in4\0mst_in5\0mst_in6\0mst_in7";
resets = < 0x05 0x41 >;
phandle = < 0x11 >;
};audio-controller@100 {
compatible = "amlogic,sm1-toddr\0amlogic,axg-toddr";
reg = < 0x00 0x100 0x00 0x2c >;
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "TODDR_A";
interrupts = < 0x00 0x94 0x01 >;
clocks = < 0x11 0x29 >;
resets = < 0x12 0x00 0x11 0x06 >;
reset-names = "arb\0rst";
amlogic,fifo-depth = < 0x2000 >;
status = "okay";
phandle = < 0x54 >;
};audio-controller@140 {
compatible = "amlogic,sm1-toddr\0amlogic,axg-toddr";
reg = < 0x00 0x140 0x00 0x2c >;
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "TODDR_B";
interrupts = < 0x00 0x95 0x01 >;
clocks = < 0x11 0x2a >;
resets = < 0x12 0x01 0x11 0x07 >;
reset-names = "arb\0rst";
amlogic,fifo-depth = < 0x100 >;
status = "okay";
phandle = < 0x55 >;
};audio-controller@180 {
compatible = "amlogic,sm1-toddr\0amlogic,axg-toddr";
reg = < 0x00 0x180 0x00 0x2c >;
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "TODDR_C";
interrupts = < 0x00 0x96 0x01 >;
clocks = < 0x11 0x2b >;
resets = < 0x12 0x02 0x11 0x08 >;
reset-names = "arb\0rst";
amlogic,fifo-depth = < 0x100 >;
status = "okay";
phandle = < 0x56 >;
};audio-controller@1c0 {
compatible = "amlogic,sm1-frddr\0amlogic,axg-frddr";
reg = < 0x00 0x1c0 0x00 0x2c >;
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "FRDDR_A";
interrupts = < 0x00 0x98 0x01 >;
clocks = < 0x11 0x26 >;
resets = < 0x12 0x03 0x11 0x09 >;
reset-names = "arb\0rst";
amlogic,fifo-depth = < 0x200 >;
status = "okay";
phandle = < 0x51 >;
};audio-controller@200 {
compatible = "amlogic,sm1-frddr\0amlogic,axg-frddr";
reg = < 0x00 0x200 0x00 0x2c >;
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "FRDDR_B";
interrupts = < 0x00 0x99 0x01 >;
clocks = < 0x11 0x27 >;
resets = < 0x12 0x04 0x11 0x0a >;
reset-names = "arb\0rst";
amlogic,fifo-depth = < 0x100 >;
status = "okay";
phandle = < 0x52 >;
};audio-controller@240 {
compatible = "amlogic,sm1-frddr\0amlogic,axg-frddr";
reg = < 0x00 0x240 0x00 0x2c >;
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "FRDDR_C";
interrupts = < 0x00 0x9a 0x01 >;
clocks = < 0x11 0x28 >;
resets = < 0x12 0x05 0x11 0x0b >;
reset-names = "arb\0rst";
amlogic,fifo-depth = < 0x100 >;
status = "okay";
phandle = < 0x53 >;
};reset-controller@280 {
status = "okay";
compatible = "amlogic,meson-sm1-audio-arb";
reg = < 0x00 0x280 0x00 0x04 >;
#reset-cells = < 0x01 >;
clocks = < 0x11 0x1d >;
phandle = < 0x12 >;
};audio-controller@300 {
compatible = "amlogic,sm1-tdmin\0amlogic,axg-tdmin";
reg = < 0x00 0x300 0x00 0x40 >;
sound-name-prefix = "TDMIN_A";
resets = < 0x11 0x01 >;
clocks = < 0x11 0x1f 0x11 0x7b 0x11 0x74 0x11 0x82 0x11 0x82 >;
clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
status = "okay";
phandle = < 0x4f >;
};audio-controller@340 {
compatible = "amlogic,sm1-tdmin\0amlogic,axg-tdmin";
reg = < 0x00 0x340 0x00 0x40 >;
sound-name-prefix = "TDMIN_B";
resets = < 0x11 0x02 >;
clocks = < 0x11 0x20 0x11 0x7c 0x11 0x75 0x11 0x83 0x11 0x83 >;
clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
status = "okay";
phandle = < 0x50 >;
};audio-controller@380 {
compatible = "amlogic,sm1-tdmin\0amlogic,axg-tdmin";
reg = < 0x00 0x380 0x00 0x40 >;
sound-name-prefix = "TDMIN_C";
resets = < 0x11 0x03 >;
clocks = < 0x11 0x21 0x11 0x7d 0x11 0x76 0x11 0x84 0x11 0x84 >;
clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
status = "disabled";
phandle = < 0xe8 >;
};audio-controller@3c0 {
compatible = "amlogic,sm1-tdmin\0amlogic,axg-tdmin";
reg = < 0x00 0x3c0 0x00 0x40 >;
sound-name-prefix = "TDMIN_LB";
resets = < 0x11 0x04 >;
clocks = < 0x11 0x22 0x11 0x7e 0x11 0x77 0x11 0x85 0x11 0x85 >;
clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
status = "disabled";
phandle = < 0xe9 >;
};audio-controller@400 {
compatible = "amlogic,g12a-spdifin\0amlogic,axg-spdifin";
reg = < 0x00 0x400 0x00 0x30 >;
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "SPDIFIN";
interrupts = < 0x00 0x97 0x01 >;
clocks = < 0x11 0x2d 0x11 0x38 >;
clock-names = "pclk\0refclk";
resets = < 0x11 0x11 >;
status = "disabled";
phandle = < 0xea >;
};audio-controller@480 {
compatible = "amlogic,g12a-spdifout\0amlogic,axg-spdifout";
reg = < 0x00 0x480 0x00 0x50 >;
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "SPDIFOUT_A";
clocks = < 0x11 0x2e 0x11 0x37 >;
clock-names = "pclk\0mclk";
resets = < 0x11 0x0f >;
status = "disabled";
phandle = < 0xeb >;
};audio-controller@500 {
compatible = "amlogic,sm1-tdmout";
reg = < 0x00 0x500 0x00 0x40 >;
sound-name-prefix = "TDMOUT_A";
resets = < 0x11 0x0c >;
clocks = < 0x11 0x23 0x11 0x7f 0x11 0x78 0x11 0x86 0x11 0x86 >;
clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
status = "okay";
phandle = < 0x4d >;
};audio-controller@540 {
compatible = "amlogic,sm1-tdmout";
reg = < 0x00 0x540 0x00 0x40 >;
sound-name-prefix = "TDMOUT_B";
resets = < 0x11 0x0d >;
clocks = < 0x11 0x24 0x11 0x80 0x11 0x79 0x11 0x87 0x11 0x87 >;
clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
status = "okay";
phandle = < 0x4e >;
};audio-controller@580 {
compatible = "amlogic,sm1-tdmout";
reg = < 0x00 0x580 0x00 0x40 >;
sound-name-prefix = "TDMOUT_C";
resets = < 0x11 0x0e >;
clocks = < 0x11 0x25 0x11 0x81 0x11 0x7a 0x11 0x88 0x11 0x88 >;
clock-names = "pclk\0sclk\0sclk_sel\0lrclk\0lrclk_sel";
status = "disabled";
phandle = < 0xec >;
};audio-controller@740 {
compatible = "amlogic,sm1-toacodec\0amlogic,g12a-toacodec";
reg = < 0x00 0x740 0x00 0x04 >;
#sound-dai-cells = < 0x01 >;
sound-name-prefix = "TOACODEC";
resets = < 0x11 0x17 >;
status = "disabled";
phandle = < 0xed >;
};audio-controller@744 {
compatible = "amlogic,sm1-tohdmitx\0amlogic,g12a-tohdmitx";
reg = < 0x00 0x744 0x00 0x04 >;
#sound-dai-cells = < 0x01 >;
sound-name-prefix = "TOHDMITX";
resets = < 0x11 0x18 >;
status = "okay";
phandle = < 0x59 >;
};audio-controller@840 {
compatible = "amlogic,sm1-toddr\0amlogic,axg-toddr";
reg = < 0x00 0x840 0x00 0x2c >;
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "TODDR_D";
interrupts = < 0x00 0x31 0x01 >;
clocks = < 0x11 0xab >;
resets = < 0x12 0x06 0x11 0x21 >;
reset-names = "arb\0rst";
amlogic,fifo-depth = < 0x100 >;
status = "disabled";
phandle = < 0xee >;
};audio-controller@880 {
compatible = "amlogic,sm1-frddr\0amlogic,axg-frddr";
reg = < 0x00 0x880 0x00 0x2c >;
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "FRDDR_D";
interrupts = < 0x00 0x32 0x01 >;
clocks = < 0x11 0xaa >;
resets = < 0x12 0x07 0x11 0x20 >;
reset-names = "arb\0rst";
amlogic,fifo-depth = < 0x100 >;
status = "disabled";
phandle = < 0xef >;
};
};audio-controller@61000 {
compatible = "amlogic,sm1-pdm\0amlogic,axg-pdm";
reg = < 0x00 0x61000 0x00 0x34 >;
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "PDM";
clocks = < 0x11 0x1e 0x11 0x39 0x11 0x3a >;
clock-names = "pclk\0dclk\0sysclk";
resets = < 0x11 0x00 >;
status = "okay";
pinctrl-0 = < 0x13 0x14 >;
pinctrl-names = "default";
phandle = < 0x5b >;
};
};bus@ff800000 {
compatible = "simple-bus";
reg = < 0x00 0xff800000 0x00 0x100000 >;
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges = < 0x00 0x00 0x00 0xff800000 0x00 0x100000 >;
phandle = < 0xf0 >;sys-ctrl@0 {
compatible = "amlogic,meson-gx-ao-sysctrl\0simple-mfd\0syscon";
reg = < 0x00 0x00 0x00 0x100 >;
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges = < 0x00 0x00 0x00 0x00 0x00 0x100 >;
phandle = < 0x0f >;clock-controller {
compatible = "amlogic,meson-g12a-aoclkc";
#clock-cells = < 0x01 >;
#reset-cells = < 0x01 >;
clocks = < 0x0e 0x02 0x0a >;
clock-names = "xtal\0mpeg-clk";
phandle = < 0x16 >;
};pinctrl@14 {
compatible = "amlogic,meson-g12a-aobus-pinctrl";
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges;
phandle = < 0x15 >;bank@14 {
reg = < 0x00 0x14 0x00 0x08 0x00 0x1c 0x00 0x08 0x00 0x24 0x00 0x14 >;
reg-names = "mux\0ds\0gpio";
gpio-controller;
#gpio-cells = < 0x02 >;
gpio-ranges = < 0x15 0x00 0x00 0x0f >;
phandle = < 0x48 >;
};i2c_ao_sck_pins {
phandle = < 0xf1 >;mux {
groups = "i2c_ao_sck";
function = "i2c_ao";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c_ao_sda {
phandle = < 0xf2 >;mux {
groups = "i2c_ao_sda";
function = "i2c_ao";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c_ao_sck_e {
phandle = < 0xf3 >;mux {
groups = "i2c_ao_sck_e";
function = "i2c_ao";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};i2c_ao_sda_e {
phandle = < 0xf4 >;mux {
groups = "i2c_ao_sda_e";
function = "i2c_ao";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};mclk0-ao {
phandle = < 0xf5 >;mux {
groups = "mclk0_ao";
function = "mclk0_ao";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-ao-b-din0 {
phandle = < 0xf6 >;mux {
groups = "tdm_ao_b_din0";
function = "tdm_ao_b";
bias-disable;
};
};spdif-ao-out {
phandle = < 0xf7 >;mux {
groups = "spdif_ao_out";
function = "spdif_ao_out";
drive-strength-microamp = < 0x1f4 >;
bias-disable;
};
};tdm-ao-b-din1 {
phandle = < 0xf8 >;mux {
groups = "tdm_ao_b_din1";
function = "tdm_ao_b";
bias-disable;
};
};tdm-ao-b-din2 {
phandle = < 0xf9 >;mux {
groups = "tdm_ao_b_din2";
function = "tdm_ao_b";
bias-disable;
};
};tdm-ao-b-dout0 {
phandle = < 0xfa >;mux {
groups = "tdm_ao_b_dout0";
function = "tdm_ao_b";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-ao-b-dout1 {
phandle = < 0xfb >;mux {
groups = "tdm_ao_b_dout1";
function = "tdm_ao_b";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-ao-b-dout2 {
phandle = < 0xfc >;mux {
groups = "tdm_ao_b_dout2";
function = "tdm_ao_b";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-ao-b-fs {
phandle = < 0xfd >;mux {
groups = "tdm_ao_b_fs";
function = "tdm_ao_b";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-ao-b-sclk {
phandle = < 0xfe >;mux {
groups = "tdm_ao_b_sclk";
function = "tdm_ao_b";
bias-disable;
drive-strength-microamp = < 0xbb8 >;
};
};tdm-ao-b-slv-fs {
phandle = < 0xff >;mux {
groups = "tdm_ao_b_slv_fs";
function = "tdm_ao_b";
bias-disable;
};
};tdm-ao-b-slv-sclk {
phandle = < 0x100 >;mux {
groups = "tdm_ao_b_slv_sclk";
function = "tdm_ao_b";
bias-disable;
};
};uart-a-ao {
phandle = < 0x1b >;mux {
groups = "uart_ao_a_tx\0uart_ao_a_rx";
function = "uart_ao_a";
bias-disable;
};
};uart-b-ao {
phandle = < 0x101 >;mux {
groups = "uart_ao_b_tx_8\0uart_ao_b_rx_9";
function = "uart_ao_b";
bias-disable;
};
};uart-ao-a-cts-rts {
phandle = < 0x102 >;mux {
groups = "uart_ao_a_cts\0uart_ao_a_rts";
function = "uart_ao_a";
bias-disable;
};
};uart-ao-b-2-3 {
phandle = < 0x103 >;mux {
groups = "uart_ao_b_tx_2\0uart_ao_b_rx_3";
function = "uart_ao_b";
bias-disable;
};
};uart-ao-b-8-9 {
phandle = < 0x104 >;mux {
groups = "uart_ao_b_tx_8\0uart_ao_b_rx_9";
function = "uart_ao_b";
bias-disable;
};
};uart-ao-b-cts-rts {
phandle = < 0x105 >;mux {
groups = "uart_ao_b_cts\0uart_ao_b_rts";
function = "uart_ao_b";
bias-disable;
};
};pwm-a-e {
phandle = < 0x106 >;mux {
groups = "pwm_a_e";
function = "pwm_a_e";
bias-disable;
};
};pwm-ao-a {
phandle = < 0x1c >;mux {
groups = "pwm_ao_a";
function = "pwm_ao_a";
bias-disable;
};
};pwm-ao-b {
phandle = < 0x107 >;mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
bias-disable;
};
};pwm-ao-c-4 {
phandle = < 0x108 >;mux {
groups = "pwm_ao_c_4";
function = "pwm_ao_c";
bias-disable;
};
};pwm-ao-c-6 {
phandle = < 0x109 >;mux {
groups = "pwm_ao_c_6";
function = "pwm_ao_c";
bias-disable;
};
};pwm-ao-d-5 {
phandle = < 0x10a >;mux {
groups = "pwm_ao_d_5";
function = "pwm_ao_d";
bias-disable;
};
};pwm-ao-d-10 {
phandle = < 0x10b >;mux {
groups = "pwm_ao_d_10";
function = "pwm_ao_d";
bias-disable;
};
};pwm-ao-d-e {
phandle = < 0x1a >;mux {
groups = "pwm_ao_d_e";
function = "pwm_ao_d";
};
};remote-input-ao {
phandle = < 0x1d >;mux {
groups = "remote_ao_input";
function = "remote_ao_input";
bias-disable;
};
};remote-out {
phandle = < 0x10c >;mux {
groups = "remote_ao_out";
function = "remote_ao_out";
bias-disable;
};
};
};
};rtc@a8 {
compatible = "amlogic,meson-vrtc";
reg = < 0x00 0xa8 0x00 0x04 >;
phandle = < 0x10d >;
};cec@100 {
compatible = "amlogic,meson-gx-ao-cec";
reg = < 0x00 0x100 0x00 0x14 >;
interrupts = < 0x00 0xc7 0x01 >;
clocks = < 0x16 0x1b >;
clock-names = "core";
status = "disabled";
pinctrl-0 = < 0x17 >;
pinctrl-names = "default";
hdmi-phandle = < 0x18 >;
phandle = < 0x10e >;
};ao-secure@140 {
compatible = "amlogic,meson-gx-ao-secure\0syscon";
reg = < 0x00 0x140 0x00 0x140 >;
amlogic,has-chip-id;
phandle = < 0x0d >;
};cec@280 {
compatible = "amlogic,meson-sm1-ao-cec";
reg = < 0x00 0x280 0x00 0x1c >;
interrupts = < 0x00 0xcb 0x01 >;
clocks = < 0x16 0x13 >;
clock-names = "oscin";
status = "okay";
pinctrl-0 = < 0x19 >;
pinctrl-names = "default";
hdmi-phandle = < 0x18 >;
phandle = < 0x10f >;
};pwm@2000 {
compatible = "amlogic,meson-g12a-ao-pwm-cd";
reg = < 0x00 0x2000 0x00 0x20 >;
#pwm-cells = < 0x03 >;
status = "okay";
pinctrl-0 = < 0x1a >;
pinctrl-names = "default";
clocks = < 0x0e >;
clock-names = "clkin1";
phandle = < 0x4c >;
};serial@3000 {
compatible = "amlogic,meson-g12a-uart\0amlogic,meson-gx-uart\0amlogic,meson-ao-uart";
reg = < 0x00 0x3000 0x00 0x18 >;
interrupts = < 0x00 0xc1 0x01 >;
clocks = < 0x0e 0x16 0x04 0x0e >;
clock-names = "xtal\0pclk\0baud";
status = "okay";
pinctrl-0 = < 0x1b >;
pinctrl-names = "default";
phandle = < 0x110 >;
};serial@4000 {
compatible = "amlogic,meson-g12a-uart\0amlogic,meson-gx-uart\0amlogic,meson-ao-uart";
reg = < 0x00 0x4000 0x00 0x18 >;
interrupts = < 0x00 0xc5 0x01 >;
clocks = < 0x0e 0x16 0x06 0x0e >;
clock-names = "xtal\0pclk\0baud";
status = "disabled";
phandle = < 0x111 >;
};i2c@5000 {
compatible = "amlogic,meson-axg-i2c";
status = "disabled";
reg = < 0x00 0x5000 0x00 0x20 >;
interrupts = < 0x00 0xc3 0x01 >;
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
clocks = < 0x02 0x18 >;
phandle = < 0x112 >;
};pwm@7000 {
compatible = "amlogic,meson-g12a-ao-pwm-ab";
reg = < 0x00 0x7000 0x00 0x20 >;
#pwm-cells = < 0x03 >;
status = "okay";
pinctrl-0 = < 0x1c >;
pinctrl-names = "default";
clocks = < 0x0e >;
clock-names = "clkin0";
phandle = < 0x4a >;
};ir@8000 {
compatible = "amlogic,meson-gxbb-ir";
reg = < 0x00 0x8000 0x00 0x20 >;
interrupts = < 0x00 0xc4 0x01 >;
status = "okay";
pinctrl-0 = < 0x1d >;
pinctrl-names = "default";
phandle = < 0x113 >;
};adc@9000 {
compatible = "amlogic,meson-g12a-saradc\0amlogic,meson-saradc";
reg = < 0x00 0x9000 0x00 0x48 >;
#io-channel-cells = < 0x01 >;
interrupts = < 0x00 0xc8 0x01 >;
clocks = < 0x0e 0x16 0x08 0x16 0x12 0x16 0x10 >;
clock-names = "clkin\0core\0adc_clk\0adc_sel";
status = "okay";
vref-supply = < 0x1e >;
phandle = < 0x114 >;
};
};video-decoder@ff620000 {
compatible = "amlogic,sm1-vdec";
reg = < 0x00 0xff620000 0x00 0x10000 0x00 0xffd0e180 0x00 0xe4 >;
reg-names = "dos\0esparser";
interrupts = < 0x00 0x2c 0x01 0x00 0x20 0x01 >;
interrupt-names = "vdec\0esparser";
amlogic,ao-sysctrl = < 0x0f >;
amlogic,canvas = < 0x1f >;
clocks = < 0x02 0x2e 0x02 0x10 0x02 0xcc 0x02 0xcf 0x02 0xd2 >;
clock-names = "dos_parser\0dos\0vdec_1\0vdec_hevc\0vdec_hevcf";
resets = < 0x05 0x28 >;
reset-names = "esparser";
phandle = < 0x115 >;
};vpu@ff900000 {
compatible = "amlogic,meson-g12a-vpu";
reg = < 0x00 0xff900000 0x00 0x100000 0x00 0xff63c000 0x00 0x1000 >;
reg-names = "vpu\0hhi";
interrupts = < 0x00 0x03 0x01 >;
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
amlogic,canvas = < 0x1f >;
power-domains = < 0x03 0x00 >;
phandle = < 0x116 >;port@0 {
reg = < 0x00 >;
phandle = < 0x117 >;
};port@1 {
reg = < 0x01 >;
phandle = < 0x118 >;endpoint {
remote-endpoint = < 0x20 >;
phandle = < 0x0a >;
};
};
};interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
reg = < 0x00 0xffc01000 0x00 0x1000 0x00 0xffc02000 0x00 0x2000 0x00 0xffc04000 0x00 0x2000 0x00 0xffc06000 0x00 0x2000 >;
interrupt-controller;
interrupts = < 0x01 0x09 0xff04 >;
#interrupt-cells = < 0x03 >;
#address-cells = < 0x00 >;
phandle = < 0x01 >;
};bus@ffd00000 {
compatible = "simple-bus";
reg = < 0x00 0xffd00000 0x00 0x100000 >;
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges = < 0x00 0x00 0x00 0xffd00000 0x00 0x100000 >;
phandle = < 0x119 >;reset-controller@1004 {
compatible = "amlogic,meson-axg-reset";
reg = < 0x00 0x1004 0x00 0x9c >;
#reset-cells = < 0x01 >;
phandle = < 0x05 >;
};interrupt-controller@f080 {
compatible = "amlogic,meson-sm1-gpio-intc\0amlogic,meson-gpio-intc";
reg = < 0x00 0xf080 0x00 0x10 >;
interrupt-controller;
#interrupt-cells = < 0x02 >;
amlogic,channel-interrupts = < 0x40 0x41 0x42 0x43 0x44 0x45 0x46 0x47 >;
phandle = < 0x26 >;
};watchdog@f0d0 {
compatible = "amlogic,meson-gxbb-wdt";
reg = < 0x00 0xf0d0 0x00 0x10 >;
clocks = < 0x0e >;
phandle = < 0x11a >;
};spi@13000 {
compatible = "amlogic,meson-g12a-spicc";
reg = < 0x00 0x13000 0x00 0x44 >;
interrupts = < 0x00 0x51 0x04 >;
clocks = < 0x02 0x17 0x02 0x102 >;
clock-names = "core\0pclk";
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
status = "disabled";
phandle = < 0x11b >;
};spi@15000 {
compatible = "amlogic,meson-g12a-spicc";
reg = < 0x00 0x15000 0x00 0x44 >;
interrupts = < 0x00 0x5a 0x04 >;
clocks = < 0x02 0x1d 0x02 0x105 >;
clock-names = "core\0pclk";
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
status = "disabled";
phandle = < 0x11c >;
};spi@14000 {
compatible = "amlogic,meson-gxbb-spifc";
status = "disabled";
reg = < 0x00 0x14000 0x00 0x80 >;
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
clocks = < 0x02 0x0a >;
phandle = < 0x11d >;
};pwm@19000 {
compatible = "amlogic,meson-g12a-ee-pwm";
reg = < 0x00 0x19000 0x00 0x20 >;
#pwm-cells = < 0x03 >;
status = "okay";
pinctrl-0 = < 0x21 >;
pinctrl-names = "default";
clocks = < 0x0e >;
clock-names = "clkin0";
phandle = < 0x5d >;
};pwm@1a000 {
compatible = "amlogic,meson-g12a-ee-pwm";
reg = < 0x00 0x1a000 0x00 0x20 >;
#pwm-cells = < 0x03 >;
status = "disabled";
phandle = < 0x11e >;
};pwm@1b000 {
compatible = "amlogic,meson-g12a-ee-pwm";
reg = < 0x00 0x1b000 0x00 0x20 >;
#pwm-cells = < 0x03 >;
status = "disabled";
phandle = < 0x11f >;
};i2c@1c000 {
compatible = "amlogic,meson-axg-i2c";
status = "okay";
reg = < 0x00 0x1c000 0x00 0x20 >;
interrupts = < 0x00 0x27 0x01 >;
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
clocks = < 0x02 0x18 >;
pinctrl-0 = < 0x22 0x23 >;
pinctrl-names = "default";
phandle = < 0x120 >;
};i2c@1d000 {
compatible = "amlogic,meson-axg-i2c";
status = "disabled";
reg = < 0x00 0x1d000 0x00 0x20 >;
interrupts = < 0x00 0xd7 0x01 >;
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
clocks = < 0x02 0x18 >;
phandle = < 0x121 >;
};i2c@1e000 {
compatible = "amlogic,meson-axg-i2c";
status = "disabled";
reg = < 0x00 0x1e000 0x00 0x20 >;
interrupts = < 0x00 0xd6 0x01 >;
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
clocks = < 0x02 0x18 >;
phandle = < 0x122 >;
};i2c@1f000 {
compatible = "amlogic,meson-axg-i2c";
status = "disabled";
reg = < 0x00 0x1f000 0x00 0x20 >;
interrupts = < 0x00 0x15 0x01 >;
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
clocks = < 0x02 0x18 >;
phandle = < 0x123 >;
};clock-measure@18000 {
compatible = "amlogic,meson-sm1-clk-measure";
reg = < 0x00 0x18000 0x00 0x10 >;
phandle = < 0x124 >;
};serial@22000 {
compatible = "amlogic,meson-g12a-uart\0amlogic,meson-gx-uart";
reg = < 0x00 0x22000 0x00 0x18 >;
interrupts = < 0x00 0x5d 0x01 >;
clocks = < 0x0e 0x02 0x39 0x0e >;
clock-names = "xtal\0pclk\0baud";
status = "disabled";
phandle = < 0x125 >;
};serial@23000 {
compatible = "amlogic,meson-g12a-uart\0amlogic,meson-gx-uart";
reg = < 0x00 0x23000 0x00 0x18 >;
interrupts = < 0x00 0x4b 0x01 >;
clocks = < 0x0e 0x02 0x2a 0x0e >;
clock-names = "xtal\0pclk\0baud";
status = "disabled";
phandle = < 0x126 >;
};serial@24000 {
compatible = "amlogic,meson-g12a-uart\0amlogic,meson-gx-uart";
reg = < 0x00 0x24000 0x00 0x18 >;
interrupts = < 0x00 0x1a 0x01 >;
clocks = < 0x0e 0x02 0x1c 0x0e >;
clock-names = "xtal\0pclk\0baud";
status = "okay";
fifo-size = < 0x80 >;
pinctrl-0 = < 0x24 0x25 >;
pinctrl-names = "default";
uart-has-rtscts;
phandle = < 0x127 >;bluetooth {
compatible = "brcm,bcm43438-bt";
interrupt-parent = < 0x26 >;
interrupts = < 0x5f 0x04 >;
interrupt-names = "host-wakeup";
shutdown-gpios = < 0x27 0x52 0x00 >;
max-speed = < 0x1e8480 >;
clocks = < 0x28 >;
clock-names = "lpo";
vbat-supply = < 0x29 >;
vddio-supply = < 0x1e >;
};
};
};sd@ffe03000 {
compatible = "amlogic,meson-axg-mmc";
reg = < 0x00 0xffe03000 0x00 0x800 >;
interrupts = < 0x00 0xbd 0x04 >;
status = "okay";
clocks = < 0x02 0x21 0x02 0x3c 0x02 0x02 >;
clock-names = "core\0clkin0\0clkin1";
resets = < 0x05 0x2c >;
pinctrl-0 = < 0x2a >;
pinctrl-1 = < 0x2b >;
pinctrl-names = "default\0clk-gate";
#address-cells = < 0x01 >;
#size-cells = < 0x00 >;
bus-width = < 0x04 >;
cap-sd-highspeed;
sd-uhs-sdr50;
max-frequency = < 0x5f5e100 >;
non-removable;
disable-wp;
keep-power-in-suspend;
mmc-pwrseq = < 0x2c >;
vmmc-supply = < 0x29 >;
vqmmc-supply = < 0x1e >;
phandle = < 0x128 >;wifi@1 {
reg = < 0x01 >;
compatible = "brcm,bcm4329-fmac";
phandle = < 0x129 >;
};
};sd@ffe05000 {
compatible = "amlogic,meson-axg-mmc";
reg = < 0x00 0xffe05000 0x00 0x800 >;
interrupts = < 0x00 0xbe 0x04 >;
status = "okay";
clocks = < 0x02 0x22 0x02 0x3d 0x02 0x02 >;
clock-names = "core\0clkin0\0clkin1";
resets = < 0x05 0x2d >;
pinctrl-0 = < 0x2d >;
pinctrl-1 = < 0x2e >;
pinctrl-names = "default\0clk-gate";
bus-width = < 0x04 >;
cap-sd-highspeed;
max-frequency = < 0x2faf080 >;
disable-wp;
cd-gpios = < 0x27 0x2f 0x01 >;
vmmc-supply = < 0x29 >;
vqmmc-supply = < 0x29 >;
phandle = < 0x12a >;
};mmc@ffe07000 {
compatible = "amlogic,meson-axg-mmc";
reg = < 0x00 0xffe07000 0x00 0x800 >;
interrupts = < 0x00 0xbf 0x04 >;
status = "okay";
clocks = < 0x02 0x23 0x02 0x3e 0x02 0x02 >;
clock-names = "core\0clkin0\0clkin1";
resets = < 0x05 0x2e >;
pinctrl-0 = < 0x2f 0x30 0x31 >;
pinctrl-1 = < 0x32 >;
pinctrl-names = "default\0clk-gate";
bus-width = < 0x08 >;
cap-mmc-highspeed;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
max-frequency = < 0xbebc200 >;
non-removable;
disable-wp;
mmc-pwrseq = < 0x33 >;
vmmc-supply = < 0x29 >;
vqmmc-supply = < 0x34 >;
phandle = < 0x12b >;
};usb@ffe09000 {
status = "okay";
compatible = "amlogic,meson-g12a-usb-ctrl";
reg = < 0x00 0xffe09000 0x00 0xa0 >;
interrupts = < 0x00 0x10 0x04 >;
#address-cells = < 0x02 >;
#size-cells = < 0x02 >;
ranges;
clocks = < 0x02 0x2f >;
resets = < 0x05 0x22 >;
dr_mode = "otg";
phys = < 0x35 0x36 0x06 0x04 >;
phy-names = "usb2-phy0\0usb2-phy1\0usb3-phy0";
power-domains = < 0x03 0x02 >;
phandle = < 0x12c >;usb@ff400000 {
compatible = "amlogic,meson-g12a-usb\0snps,dwc2";
reg = < 0x00 0xff400000 0x00 0x40000 >;
interrupts = < 0x00 0x1f 0x04 >;
clocks = < 0x02 0x37 >;
clock-names = "otg";
phys = < 0x36 >;
phy-names = "usb2-phy";
dr_mode = "peripheral";
g-rx-fifo-size = < 0xc0 >;
g-np-tx-fifo-size = < 0x80 >;
g-tx-fifo-size = < 0x80 0x80 0x10 0x10 0x10 >;
phandle = < 0x12d >;
};usb@ff500000 {
compatible = "snps,dwc3";
reg = < 0x00 0xff500000 0x00 0x100000 >;
interrupts = < 0x00 0x1e 0x04 >;
dr_mode = "host";
snps,dis_u2_susphy_quirk;
snps,quirk-frame-length-adjustment = < 0x20 >;
snps,parkmode-disable-ss-quirk;
phandle = < 0x12e >;
};
};gpu@ffe40000 {
compatible = "amlogic,meson-g12a-mali\0arm,mali-bifrost";
reg = < 0x00 0xffe40000 0x00 0x40000 >;
interrupt-parent = < 0x01 >;
interrupts = < 0x00 0xa2 0x04 0x00 0xa1 0x04 0x00 0xa0 0x04 >;
interrupt-names = "job\0mmu\0gpu";
clocks = < 0x02 0xaf >;
resets = < 0x05 0x14 0x05 0x4e >;
operating-points-v2 = < 0x37 >;
#cooling-cells = < 0x02 >;
phandle = < 0x41 >;
};
};thermal-zones {
cpu-thermal {
polling-delay = < 0x3e8 >;
polling-delay-passive = < 0x64 >;
thermal-sensors = < 0x38 >;
phandle = < 0x12f >;trips {
cpu-passive {
temperature = < 0x14c08 >;
hysteresis = < 0x7d0 >;
type = "passive";
phandle = < 0x39 >;
};cpu-hot {
temperature = < 0x17318 >;
hysteresis = < 0x7d0 >;
type = "hot";
phandle = < 0x3e >;
};cpu-critical {
temperature = < 0x1adb0 >;
hysteresis = < 0x7d0 >;
type = "critical";
phandle = < 0x130 >;
};
};cooling-maps {
map0 {
trip = < 0x39 >;
cooling-device = < 0x3a 0xffffffff 0xffffffff 0x3b 0xffffffff 0xffffffff 0x3c 0xffffffff 0xffffffff 0x3d 0xffffffff 0xffffffff >;
};map1 {
trip = < 0x3e >;
cooling-device = < 0x3a 0xffffffff 0xffffffff 0x3b 0xffffffff 0xffffffff 0x3c 0xffffffff 0xffffffff 0x3d 0xffffffff 0xffffffff >;
};
};
};ddr-thermal {
polling-delay = < 0x3e8 >;
polling-delay-passive = < 0x64 >;
thermal-sensors = < 0x3f >;
phandle = < 0x131 >;trips {
ddr-passive {
temperature = < 0x14c08 >;
hysteresis = < 0x7d0 >;
type = "passive";
phandle = < 0x40 >;
};ddr-critical {
temperature = < 0x1adb0 >;
hysteresis = < 0x7d0 >;
type = "critical";
phandle = < 0x132 >;
};
};cooling-maps {
map {
trip = < 0x40 >;
cooling-device = < 0x41 0xffffffff 0xffffffff >;
};
};
};
};timer {
compatible = "arm,armv8-timer";
interrupts = < 0x01 0x0d 0xff08 0x01 0x0e 0xff08 0x01 0x0b 0xff08 0x01 0x0a 0xff08 >;
arm,no-tick-in-suspend;
};xtal-clk {
compatible = "fixed-clock";
clock-frequency = < 0x16e3600 >;
clock-output-names = "xtal";
#clock-cells = < 0x00 >;
phandle = < 0x0e >;
};audio-controller-0 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "TDM_A";
clocks = < 0x11 0x31 0x11 0x4f 0x11 0x56 >;
clock-names = "mclk\0sclk\0lrclk";
status = "okay";
pinctrl-0 = < 0x42 0x43 0x44 >;
pinctrl-names = "default";
assigned-clocks = < 0x11 0xa0 0x11 0x9d >;
assigned-clock-parents = < 0x11 0x4f 0x11 0x56 >;
assigned-clock-rates = < 0x00 0x00 >;
phandle = < 0x57 >;
};audio-controller-1 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "TDM_B";
clocks = < 0x11 0x32 0x11 0x50 0x11 0x57 >;
clock-names = "mclk\0sclk\0lrclk";
status = "okay";
phandle = < 0x5a >;
};audio-controller-2 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "TDM_C";
clocks = < 0x11 0x33 0x11 0x51 0x11 0x58 >;
clock-names = "mclk\0sclk\0lrclk";
status = "disabled";
phandle = < 0x133 >;
};cpus {
#address-cells = < 0x02 >;
#size-cells = < 0x00 >;cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = < 0x00 0x00 >;
enable-method = "psci";
next-level-cache = < 0x45 >;
#cooling-cells = < 0x02 >;
cpu-supply = < 0x46 >;
operating-points-v2 = < 0x47 >;
clocks = < 0x02 0xbb >;
clock-latency = < 0xc350 >;
phandle = < 0x3a >;
};cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = < 0x00 0x01 >;
enable-method = "psci";
next-level-cache = < 0x45 >;
#cooling-cells = < 0x02 >;
cpu-supply = < 0x46 >;
operating-points-v2 = < 0x47 >;
clocks = < 0x02 0xfd >;
clock-latency = < 0xc350 >;
phandle = < 0x3b >;
};cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = < 0x00 0x02 >;
enable-method = "psci";
next-level-cache = < 0x45 >;
#cooling-cells = < 0x02 >;
cpu-supply = < 0x46 >;
operating-points-v2 = < 0x47 >;
clocks = < 0x02 0xfe >;
clock-latency = < 0xc350 >;
phandle = < 0x3c >;
};cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = < 0x00 0x03 >;
enable-method = "psci";
next-level-cache = < 0x45 >;
#cooling-cells = < 0x02 >;
cpu-supply = < 0x46 >;
operating-points-v2 = < 0x47 >;
clocks = < 0x02 0xff >;
clock-latency = < 0xc350 >;
phandle = < 0x3d >;
};l2-cache0 {
compatible = "cache";
phandle = < 0x45 >;
};
};opp-table {
compatible = "operating-points-v2";
opp-shared;
phandle = < 0x47 >;opp-1000000000 {
opp-hz = < 0x00 0x3b9aca00 >;
opp-microvolt = < 0xbbfd0 >;
};opp-1200000000 {
opp-hz = < 0x00 0x47868c00 >;
opp-microvolt = < 0xbe6e0 >;
};opp-1404000000 {
opp-hz = < 0x00 0x53af5700 >;
opp-microvolt = < 0xc0df0 >;
};opp-1500000000 {
opp-hz = < 0x00 0x59682f00 >;
opp-microvolt = < 0xc3500 >;
};opp-1608000000 {
opp-hz = < 0x00 0x5fd82200 >;
opp-microvolt = < 0xc5c10 >;
};opp-1704000000 {
opp-hz = < 0x00 0x6590fa00 >;
opp-microvolt = < 0xcf850 >;
};opp-1800000000 {
opp-hz = < 0x00 0x6b49d200 >;
opp-microvolt = < 0xdbba0 >;
};opp-1908000000 {
opp-hz = < 0x00 0x71b9c500 >;
opp-microvolt = < 0xe7ef0 >;
};opp-2016000000 {
opp-hz = < 0x00 0x7829b800 >;
opp-microvolt = < 0xf4240 >;
};opp-2100000000 {
opp-hz = < 0x00 0x7d2b7500 >;
opp-microvolt = < 0xf9830 >;
};
};audio-codec-0 {
compatible = "maxim,max98357a";
#sound-dai-cells = < 0x00 >;
sound-name-prefix = "U16";
sdmode-gpios = < 0x27 0x49 0x00 >;
phandle = < 0x58 >;
};audio-codec-1 {
#sound-dai-cells = < 0x00 >;
compatible = "dmic-codec";
num-channels = < 0x02 >;
wakeup-delay-ms = < 0x32 >;
status = "okay";
sound-name-prefix = "MIC";
phandle = < 0x5c >;
};emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = < 0x27 0x25 0x01 >;
phandle = < 0x33 >;
};gpio-keys {
compatible = "gpio-keys";key-1 {
label = [ 41 00 ];
linux,code = < 0x100 >;
gpios = < 0x27 0x16 0x01 >;
interrupt-parent = < 0x26 >;
interrupts = < 0x22 0x03 >;
};key-2 {
label = [ 42 00 ];
linux,code = < 0x101 >;
gpios = < 0x27 0x17 0x01 >;
interrupt-parent = < 0x26 >;
interrupts = < 0x23 0x03 >;
};key-3 {
label = [ 43 00 ];
linux,code = < 0x102 >;
gpios = < 0x48 0x02 0x01 >;
interrupt-parent = < 0x26 >;
interrupts = < 0x02 0x03 >;
};key-mic-mute {
label = "MicMute";
linux,code = < 0x0e >;
linux,input-type = < 0x05 >;
gpios = < 0x48 0x0e 0x01 >;
interrupt-parent = < 0x26 >;
interrupts = < 0x63 0x03 >;
};key-power {
label = "PowerKey";
linux,code = < 0x74 >;
gpios = < 0x48 0x03 0x01 >;
interrupt-parent = < 0x26 >;
interrupts = < 0x03 0x03 >;
};
};hdmi-connector {
compatible = "hdmi-connector";
type = [ 61 00 ];port {
endpoint {
remote-endpoint = < 0x49 >;
phandle = < 0x0b >;
};
};
};led-controller-1 {
compatible = "gpio-leds";led-1 {
label = "sei610:blue:bt";
gpios = < 0x27 0x30 0x07 >;
default-state = "off";
};
};led-controller-2 {
compatible = "pwm-leds";led-2 {
label = "sei610:red:power";
pwms = < 0x4a 0x00 0x7736 0x00 >;
max-brightness = < 0xff >;
linux,default-trigger = "default-on";
active-low;
};
};memory@0 {
device_type = "memory";
reg = < 0x00 0x00 0x00 0x40000000 >;
};regulator-ao_5v {
compatible = "regulator-fixed";
regulator-name = "AO_5V";
regulator-min-microvolt = < 0x4c4b40 >;
regulator-max-microvolt = < 0x4c4b40 >;
vin-supply = < 0x4b >;
regulator-always-on;
phandle = < 0x134 >;
};regulator-dc_in {
compatible = "regulator-fixed";
regulator-name = "DC_IN";
regulator-min-microvolt = < 0x4c4b40 >;
regulator-max-microvolt = < 0x4c4b40 >;
regulator-always-on;
phandle = < 0x4b >;
};regulator-emmc_1v8 {
compatible = "regulator-fixed";
regulator-name = "EMMC_1V8";
regulator-min-microvolt = < 0x1b7740 >;
regulator-max-microvolt = < 0x1b7740 >;
vin-supply = < 0x29 >;
regulator-always-on;
phandle = < 0x34 >;
};regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = < 0x325aa0 >;
regulator-max-microvolt = < 0x325aa0 >;
vin-supply = < 0x4b >;
regulator-always-on;
phandle = < 0x29 >;
};regulator-vddao_3v3_t {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3_T";
regulator-min-microvolt = < 0x325aa0 >;
regulator-max-microvolt = < 0x325aa0 >;
vin-supply = < 0x29 >;
gpio = < 0x27 0x18 0x06 >;
regulator-always-on;
phandle = < 0x135 >;
};regulator-vddcpu {
compatible = "pwm-regulator";
regulator-name = "VDDCPU";
regulator-min-microvolt = < 0xa8750 >;
regulator-max-microvolt = < 0x100590 >;
pwm-supply = < 0x4b >;
pwms = < 0x4c 0x01 0x5dc 0x00 >;
pwm-dutycycle-range = < 0x64 0x00 >;
regulator-boot-on;
regulator-always-on;
phandle = < 0x46 >;
};regulator-vddio_ao1v8 {
compatible = "regulator-fixed";
regulator-name = "VDDIO_AO1V8";
regulator-min-microvolt = < 0x1b7740 >;
regulator-max-microvolt = < 0x1b7740 >;
vin-supply = < 0x29 >;
regulator-always-on;
phandle = < 0x1e >;
};sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = < 0x27 0x47 0x01 >;
clocks = < 0x28 >;
clock-names = "ext_clock";
phandle = < 0x2c >;
};sound {
compatible = "amlogic,axg-sound-card";
model = "SEI610";
audio-aux-devs = < 0x4d 0x4e 0x4f 0x50 >;
audio-routing = "TDMOUT_A IN 0\0FRDDR_A OUT 0\0TDMOUT_A IN 1\0FRDDR_B OUT 0\0TDMOUT_A IN 2\0FRDDR_C OUT 0\0TDM_A Playback\0TDMOUT_A OUT\0TDMOUT_B IN 0\0FRDDR_A OUT 1\0TDMOUT_B IN 1\0FRDDR_B OUT 1\0TDMOUT_B IN 2\0FRDDR_C OUT 1\0TDM_B Playback\0TDMOUT_B OUT\0TODDR_A IN 4\0PDM Capture\0TODDR_B IN 4\0PDM Capture\0TODDR_C IN 4\0PDM Capture\0TDMIN_A IN 0\0TDM_A Capture\0TDMIN_A IN 3\0TDM_A Loopback\0TDMIN_B IN 0\0TDM_A Capture\0TDMIN_B IN 3\0TDM_A Loopback\0TDMIN_A IN 1\0TDM_B Capture\0TDMIN_A IN 4\0TDM_B Loopback\0TDMIN_B IN 1\0TDM_B Capture\0TDMIN_B IN 4\0TDM_B Loopback\0TODDR_A IN 0\0TDMIN_A OUT\0TODDR_B IN 0\0TDMIN_A OUT\0TODDR_C IN 0\0TDMIN_A OUT\0TODDR_A IN 1\0TDMIN_B OUT\0TODDR_B IN 1\0TDMIN_B OUT\0TODDR_C IN 1\0TDMIN_B OUT";
assigned-clocks = < 0x02 0x0d 0x02 0x0b 0x02 0x0c >;
assigned-clock-parents = < 0x00 0x00 0x00 >;
assigned-clock-rates = < 0x11940000 0x10266000 0x17700000 >;
status = "okay";dai-link-0 {
sound-dai = < 0x51 >;
};dai-link-1 {
sound-dai = < 0x52 >;
};dai-link-2 {
sound-dai = < 0x53 >;
};dai-link-3 {
sound-dai = < 0x54 >;
};dai-link-4 {
sound-dai = < 0x55 >;
};dai-link-5 {
sound-dai = < 0x56 >;
};dai-link-6 {
sound-dai = < 0x57 >;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = < 0x01 0x01 >;
mclk-fs = < 0x100 >;codec-0 {
sound-dai = < 0x58 >;
};codec-1 {
sound-dai = < 0x59 0x00 >;
};
};dai-link-7 {
sound-dai = < 0x5a >;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = < 0x01 0x01 >;
dai-tdm-slot-tx-mask-1 = < 0x01 0x01 >;
dai-tdm-slot-tx-mask-2 = < 0x01 0x01 >;
dai-tdm-slot-tx-mask-3 = < 0x01 0x01 >;
mclk-fs = < 0x100 >;codec {
sound-dai = < 0x59 0x01 >;
};
};dai-link-8 {
sound-dai = < 0x5b >;codec {
sound-dai = < 0x5c >;
};
};dai-link-9 {
sound-dai = < 0x59 0x03 >;codec {
sound-dai = < 0x18 >;
};
};
};wifi32k {
compatible = "pwm-clock";
#clock-cells = < 0x00 >;
clock-frequency = < 0x8000 >;
pwms = < 0x5d 0x00 0x7736 0x00 >;
phandle = < 0x28 >;
};__symbols__ {
simplefb_cvbs = "/chosen/framebuffer-cvbs";
simplefb_hdmi = "/chosen/framebuffer-hdmi";
efuse = "/efuse";
gpu_opp_table = "/opp-table-gpu";
secmon_reserved = "/reserved-memory/secmon@5000000";
secmon_reserved_bl32 = "/reserved-memory/secmon@5300000";
sm = "/secure-monitor";
pcie = "/soc/pcie@fc000000";
ethmac = "/soc/ethernet@ff3f0000";
mdio0 = "/soc/ethernet@ff3f0000/mdio";
apb = "/soc/bus@ff600000";
hdmi_tx = "/soc/bus@ff600000/hdmi-tx@0";
hdmi_tx_venc_port = "/soc/bus@ff600000/hdmi-tx@0/port@0";
hdmi_tx_in = "/soc/bus@ff600000/hdmi-tx@0/port@0/endpoint";
hdmi_tx_tmds_port = "/soc/bus@ff600000/hdmi-tx@0/port@1";
hdmi_tx_tmds_out = "/soc/bus@ff600000/hdmi-tx@0/port@1/endpoint";
apb_efuse = "/soc/bus@ff600000/bus@30000";
hwrng = "/soc/bus@ff600000/bus@30000/rng@218";
acodec = "/soc/bus@ff600000/audio-controller@32000";
periphs = "/soc/bus@ff600000/bus@34400";
periphs_pinctrl = "/soc/bus@ff600000/bus@34400/pinctrl@40";
gpio = "/soc/bus@ff600000/bus@34400/pinctrl@40/bank@40";
cec_ao_a_h_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/cec_ao_a_h";
cec_ao_b_h_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/cec_ao_b_h";
emmc_ctrl_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/emmc-ctrl";
emmc_data_4b_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/emmc-data-4b";
emmc_data_8b_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/emmc-data-8b";
emmc_ds_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/emmc-ds";
emmc_clk_gate_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/emmc_clk_gate";
hdmitx_ddc_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/hdmitx_ddc";
hdmitx_hpd_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/hdmitx_hpd";
i2c0_sda_c_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c0-sda-c";
i2c0_sck_c_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c0-sck-c";
i2c0_sda_z0_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c0-sda-z0";
i2c0_sck_z1_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c0-sck-z1";
i2c0_sda_z7_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c0-sda-z7";
i2c0_sda_z8_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c0-sda-z8";
i2c1_sda_x_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c1-sda-x";
i2c1_sck_x_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c1-sck-x";
i2c1_sda_h2_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c1-sda-h2";
i2c1_sck_h3_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c1-sck-h3";
i2c1_sda_h6_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c1-sda-h6";
i2c1_sck_h7_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c1-sck-h7";
i2c2_sda_x_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c2-sda-x";
i2c2_sck_x_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c2-sck-x";
i2c2_sda_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c2-sda-z";
i2c2_sck_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c2-sck-z";
i2c3_sda_h_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c3-sda-h";
i2c3_sck_h_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c3-sck-h";
i2c3_sda_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c3-sda-a";
i2c3_sck_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/i2c3-sck-a";
remote_input_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/remote-input";
mclk0_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/mclk0-a";
mclk1_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/mclk1-a";
mclk1_x_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/mclk1-x";
mclk1_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/mclk1-z";
nor_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/nor";
pdm_din0_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din0-a";
pdm_din0_c_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din0-c";
pdm_din0_x_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din0-x";
pdm_din0_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din0-z";
pdm_din1_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din1-a";
pdm_din1_c_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din1-c";
pdm_din1_x_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din1-x";
pdm_din1_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din1-z";
pdm_din2_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din2-a";
pdm_din2_c_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din2-c";
pdm_din2_x_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din2-x";
pdm_din2_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din2-z";
pdm_din3_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din3-a";
pdm_din3_c_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din3-c";
pdm_din3_x_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din3-x";
pdm_din3_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-din3-z";
pdm_dclk_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-dclk-a";
pdm_dclk_c_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-dclk-c";
pdm_dclk_x_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-dclk-x";
pdm_dclk_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pdm-dclk-z";
pwm_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pwm-a";
pwm_b_x7_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pwm-b-x7";
pwm_b_x19_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pwm-b-x19";
pwm_c_c_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pwm-c-c";
pwm_c_x5_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pwm-c-x5";
pwm_c_x8_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pwm-c-x8";
pwm_d_x3_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pwm-d-x3";
pwm_d_x6_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pwm-d-x6";
pwm_e_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pwm-e";
pwm_f_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pwm-f-z";
pwm_f_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pwm-f-a";
pwm_f_x_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pwm-f-x";
pwm_f_h_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/pwm-f-h";
sdcard_c_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/sdcard_c";
sdcard_clk_gate_c_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/sdcard_clk_gate_c";
sdcard_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/sdcard_z";
sdcard_clk_gate_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/sdcard_clk_gate_z";
sdio_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/sdio";
sdio_clk_gate_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/sdio_clk_gate";
spdif_in_a10_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/spdif-in-a10";
spdif_in_a12_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/spdif-in-a12";
spdif_in_h_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/spdif-in-h";
spdif_out_h_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/spdif-out-h";
spdif_out_a11_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/spdif-out-a11";
spdif_out_a13_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/spdif-out-a13";
spicc0_x_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/spicc0-x";
spicc0_ss0_x_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/spicc0-ss0-x";
spicc0_c_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/spicc0-c";
spicc1_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/spicc1";
spicc1_ss0_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/spicc1-ss0";
tdm_a_din0_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-a-din0";
tdm_a_din1_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-a-din1";
tdm_a_dout0_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-a-dout0";
tdm_a_dout1_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-a-dout1";
tdm_a_fs_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-a-fs";
tdm_a_sclk_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-a-sclk";
tdm_a_slv_fs_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-a-slv-fs";
tdm_a_slv_sclk_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-a-slv-sclk";
tdm_b_din0_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-din0";
tdm_b_din1_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-din1";
tdm_b_din2_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-din2";
tdm_b_din3_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-din3-a";
tdm_b_din3_h_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-din3-h";
tdm_b_dout0_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-dout0";
tdm_b_dout1_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-dout1";
tdm_b_dout2_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-dout2";
tdm_b_dout3_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-dout3-a";
tdm_b_dout3_h_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-dout3-h";
tdm_b_fs_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-fs";
tdm_b_sclk_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-sclk";
tdm_b_slv_fs_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-slv-fs";
tdm_b_slv_sclk_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-b-slv-sclk";
tdm_c_din0_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-din0-a";
tdm_c_din0_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-din0-z";
tdm_c_din1_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-din1-a";
tdm_c_din1_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-din1-z";
tdm_c_din2_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-din2-a";
eth_leds_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/eth-leds";
eth_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/eth";
eth_rgmii_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/eth-rgmii";
tdm_c_din2_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-din2-z";
tdm_c_din3_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-din3-a";
tdm_c_din3_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-din3-z";
tdm_c_dout0_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-dout0-a";
tdm_c_dout0_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-dout0-z";
tdm_c_dout1_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-dout1-a";
tdm_c_dout1_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-dout1-z";
tdm_c_dout2_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-dout2-a";
tdm_c_dout2_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-dout2-z";
tdm_c_dout3_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-dout3-a";
tdm_c_dout3_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-dout3-z";
tdm_c_fs_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-fs-a";
tdm_c_fs_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-fs-z";
tdm_c_sclk_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-sclk-a";
tdm_c_sclk_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-sclk-z";
tdm_c_slv_fs_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-slv-fs-a";
tdm_c_slv_fs_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-slv-fs-z";
tdm_c_slv_sclk_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-slv-sclk-a";
tdm_c_slv_sclk_z_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/tdm-c-slv-sclk-z";
uart_a_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/uart-a";
uart_a_cts_rts_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/uart-a-cts-rts";
uart_b_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/uart-b";
uart_c_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/uart-c";
uart_c_cts_rts_pins = "/soc/bus@ff600000/bus@34400/pinctrl@40/uart-c-cts-rts";
cpu_temp = "/soc/bus@ff600000/temperature-sensor@34800";
ddr_temp = "/soc/bus@ff600000/temperature-sensor@34c00";
usb2_phy0 = "/soc/bus@ff600000/phy@36000";
dmc = "/soc/bus@ff600000/bus@38000";
canvas = "/soc/bus@ff600000/bus@38000/video-lut@48";
usb2_phy1 = "/soc/bus@ff600000/phy@3a000";
hiu = "/soc/bus@ff600000/bus@3c000";
hhi = "/soc/bus@ff600000/bus@3c000/system-controller@0";
clkc = "/soc/bus@ff600000/bus@3c000/system-controller@0/clock-controller";
pwrc = "/soc/bus@ff600000/bus@3c000/system-controller@0/power-controller";
usb3_pcie_phy = "/soc/bus@ff600000/phy@46000";
eth_phy = "/soc/bus@ff600000/mdio-multiplexer@4c000";
ext_mdio = "/soc/bus@ff600000/mdio-multiplexer@4c000/mdio@0";
int_mdio = "/soc/bus@ff600000/mdio-multiplexer@4c000/mdio@1";
internal_ephy = "/soc/bus@ff600000/mdio-multiplexer@4c000/mdio@1/ethernet-phy@8";
audio = "/soc/bus@ff600000/bus@60000";
clkc_audio = "/soc/bus@ff600000/bus@60000/clock-controller@0";
toddr_a = "/soc/bus@ff600000/bus@60000/audio-controller@100";
toddr_b = "/soc/bus@ff600000/bus@60000/audio-controller@140";
toddr_c = "/soc/bus@ff600000/bus@60000/audio-controller@180";
frddr_a = "/soc/bus@ff600000/bus@60000/audio-controller@1c0";
frddr_b = "/soc/bus@ff600000/bus@60000/audio-controller@200";
frddr_c = "/soc/bus@ff600000/bus@60000/audio-controller@240";
arb = "/soc/bus@ff600000/bus@60000/reset-controller@280";
tdmin_a = "/soc/bus@ff600000/bus@60000/audio-controller@300";
tdmin_b = "/soc/bus@ff600000/bus@60000/audio-controller@340";
tdmin_c = "/soc/bus@ff600000/bus@60000/audio-controller@380";
tdmin_lb = "/soc/bus@ff600000/bus@60000/audio-controller@3c0";
spdifin = "/soc/bus@ff600000/bus@60000/audio-controller@400";
spdifout_a = "/soc/bus@ff600000/bus@60000/audio-controller@480";
tdmout_a = "/soc/bus@ff600000/bus@60000/audio-controller@500";
tdmout_b = "/soc/bus@ff600000/bus@60000/audio-controller@540";
tdmout_c = "/soc/bus@ff600000/bus@60000/audio-controller@580";
toacodec = "/soc/bus@ff600000/bus@60000/audio-controller@740";
tohdmitx = "/soc/bus@ff600000/bus@60000/audio-controller@744";
toddr_d = "/soc/bus@ff600000/bus@60000/audio-controller@840";
frddr_d = "/soc/bus@ff600000/bus@60000/audio-controller@880";
pdm = "/soc/bus@ff600000/audio-controller@61000";
aobus = "/soc/bus@ff800000";
rti = "/soc/bus@ff800000/sys-ctrl@0";
clkc_AO = "/soc/bus@ff800000/sys-ctrl@0/clock-controller";
ao_pinctrl = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14";
gpio_ao = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/bank@14";
i2c_ao_sck_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/i2c_ao_sck_pins";
i2c_ao_sda_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/i2c_ao_sda";
i2c_ao_sck_e_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/i2c_ao_sck_e";
i2c_ao_sda_e_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/i2c_ao_sda_e";
mclk0_ao_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/mclk0-ao";
tdm_ao_b_din0_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/tdm-ao-b-din0";
spdif_ao_out_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/spdif-ao-out";
tdm_ao_b_din1_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/tdm-ao-b-din1";
tdm_ao_b_din2_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/tdm-ao-b-din2";
tdm_ao_b_dout0_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/tdm-ao-b-dout0";
tdm_ao_b_dout1_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/tdm-ao-b-dout1";
tdm_ao_b_dout2_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/tdm-ao-b-dout2";
tdm_ao_b_fs_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/tdm-ao-b-fs";
tdm_ao_b_sclk_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/tdm-ao-b-sclk";
tdm_ao_b_slv_fs_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/tdm-ao-b-slv-fs";
tdm_ao_b_slv_sclk_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/tdm-ao-b-slv-sclk";
uart_ao_a_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/uart-a-ao";
uart_ao_b_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/uart-b-ao";
uart_ao_a_cts_rts_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/uart-ao-a-cts-rts";
uart_ao_b_2_3_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/uart-ao-b-2-3";
uart_ao_b_8_9_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/uart-ao-b-8-9";
uart_ao_b_cts_rts_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/uart-ao-b-cts-rts";
pwm_a_e_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/pwm-a-e";
pwm_ao_a_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/pwm-ao-a";
pwm_ao_b_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/pwm-ao-b";
pwm_ao_c_4_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/pwm-ao-c-4";
pwm_ao_c_6_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/pwm-ao-c-6";
pwm_ao_d_5_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/pwm-ao-d-5";
pwm_ao_d_10_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/pwm-ao-d-10";
pwm_ao_d_e_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/pwm-ao-d-e";
remote_input_ao_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/remote-input-ao";
remote_out_ao_pins = "/soc/bus@ff800000/sys-ctrl@0/pinctrl@14/remote-out";
vrtc = "/soc/bus@ff800000/rtc@a8";
cec_AO = "/soc/bus@ff800000/cec@100";
sec_AO = "/soc/bus@ff800000/ao-secure@140";
cecb_AO = "/soc/bus@ff800000/cec@280";
pwm_AO_cd = "/soc/bus@ff800000/pwm@2000";
uart_AO = "/soc/bus@ff800000/serial@3000";
uart_AO_B = "/soc/bus@ff800000/serial@4000";
i2c_AO = "/soc/bus@ff800000/i2c@5000";
pwm_AO_ab = "/soc/bus@ff800000/pwm@7000";
ir = "/soc/bus@ff800000/ir@8000";
saradc = "/soc/bus@ff800000/adc@9000";
vdec = "/soc/video-decoder@ff620000";
vpu = "/soc/vpu@ff900000";
cvbs_vdac_port = "/soc/vpu@ff900000/port@0";
hdmi_tx_port = "/soc/vpu@ff900000/port@1";
hdmi_tx_out = "/soc/vpu@ff900000/port@1/endpoint";
gic = "/soc/interrupt-controller@ffc01000";
cbus = "/soc/bus@ffd00000";
reset = "/soc/bus@ffd00000/reset-controller@1004";
gpio_intc = "/soc/bus@ffd00000/interrupt-controller@f080";
watchdog = "/soc/bus@ffd00000/watchdog@f0d0";
spicc0 = "/soc/bus@ffd00000/spi@13000";
spicc1 = "/soc/bus@ffd00000/spi@15000";
spifc = "/soc/bus@ffd00000/spi@14000";
pwm_ef = "/soc/bus@ffd00000/pwm@19000";
pwm_cd = "/soc/bus@ffd00000/pwm@1a000";
pwm_ab = "/soc/bus@ffd00000/pwm@1b000";
i2c3 = "/soc/bus@ffd00000/i2c@1c000";
i2c2 = "/soc/bus@ffd00000/i2c@1d000";
i2c1 = "/soc/bus@ffd00000/i2c@1e000";
i2c0 = "/soc/bus@ffd00000/i2c@1f000";
clk_msr = "/soc/bus@ffd00000/clock-measure@18000";
uart_C = "/soc/bus@ffd00000/serial@22000";
uart_B = "/soc/bus@ffd00000/serial@23000";
uart_A = "/soc/bus@ffd00000/serial@24000";
sd_emmc_a = "/soc/sd@ffe03000";
brcmf = "/soc/sd@ffe03000/wifi@1";
sd_emmc_b = "/soc/sd@ffe05000";
sd_emmc_c = "/soc/mmc@ffe07000";
usb = "/soc/usb@ffe09000";
dwc2 = "/soc/usb@ffe09000/usb@ff400000";
dwc3 = "/soc/usb@ffe09000/usb@ff500000";
mali = "/soc/gpu@ffe40000";
cpu_thermal = "/thermal-zones/cpu-thermal";
cpu_passive = "/thermal-zones/cpu-thermal/trips/cpu-passive";
cpu_hot = "/thermal-zones/cpu-thermal/trips/cpu-hot";
cpu_critical = "/thermal-zones/cpu-thermal/trips/cpu-critical";
ddr_thermal = "/thermal-zones/ddr-thermal";
ddr_passive = "/thermal-zones/ddr-thermal/trips/ddr-passive";
ddr_critical = "/thermal-zones/ddr-thermal/trips/ddr-critical";
xtal = "/xtal-clk";
tdmif_a = "/audio-controller-0";
tdmif_b = "/audio-controller-1";
tdmif_c = "/audio-controller-2";
cpu0 = "/cpus/cpu@0";
cpu1 = "/cpus/cpu@1";
cpu2 = "/cpus/cpu@2";
cpu3 = "/cpus/cpu@3";
l2 = "/cpus/l2-cache0";
cpu_opp_table = "/opp-table";
mono_dac = "/audio-codec-0";
dmics = "/audio-codec-1";
emmc_pwrseq = "/emmc-pwrseq";
hdmi_connector_in = "/hdmi-connector/port/endpoint";
ao_5v = "/regulator-ao_5v";
dc_in = "/regulator-dc_in";
emmc_1v8 = "/regulator-emmc_1v8";
vddao_3v3 = "/regulator-vddao_3v3";
vddao_3v3_t = "/regulator-vddao_3v3_t";
vddcpu = "/regulator-vddcpu";
vddio_ao1v8 = "/regulator-vddio_ao1v8";
sdio_pwrseq = "/sdio-pwrseq";
wifi32k = "/wifi32k";
};
}; -
I put extra dtb files that I download on /boot/amlogic .
For example I find that devmfc uses meson-sm1-ac2xx-generic.dtb on /boot/dtb/amlogic.
So I copy it to Armbian boot partition on dtb/amlogic/meson-sm1-ac2xx-generic.dtb
Then I edit extlinux/extlinux.conf
label Armbian_community
kernel /Image
initrd /uInitrd
fdt /dtb/amlogic/meson-sm1-ac2xx-generic.dtb
append root=UUID=7dc5c0a3-acfc-4d51-a066-6c14d983a9de rootflags=data=writeback console=ttyAML0,115200n8 console=tty0 rw no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 splash plymouth.ignore-serial-consolesI also test with other dtb files ad of course with the stock (default) image of Armbian just when donwload it, I use balenaetcher to write image on sd-card put it on a usb with sd-card reader and boot the tvbox, but doesn't work at all.
The u-boot that I use is the u-boot-s905x3 that I copy to a directory and rename as u-boot.ext and then copy It to /boot.
I oly try to run Armbian Systems from here → https://www.armbian.com/amlogic-s9xx-tv-box/
And I find devmfc when I search on google for " Debain s905x tv boxes" → thiss ystem works perfect, I only need to put on sd-card and put the sd-card on the usb with the sd-card reader and Tv Box shows HKSERIES and then go enter on the system devmfc.
But I want some graphical friendly image to test the performance of tvbox as mini pc and because this I try to install xfce version of armbian.
Thanks.
-
I'm been trying to install Armbian on this TV.BOX console.
I already test bookworm xfce image of Armbian as like the last XFCE image → Armbian_community_26.2.0-trunk.357_Aml-s9xx-box_noble_current_6.18.7_xfce_desktop
I als test minimal images ad they don't work.
The spces of console are :
Processor (CPU)Amlogic S905X3 Quad-core ARM Cortex-A55, up to 1.91GHz
Graphics (GPU)Mali-G31 MP2
RAM4GB DDR3
Storage (ROM)32GB eMMC
Video OutputHDMI, supports up to 8K@24fps (Android system) and 1080p (EmuELEC system)
Connectivity2.4G/5G Dual-band Wi-Fi, 10/1000M Ethernet LAN, Bluetooth 4.0
Ports1x USB 3.0, 4x USB 2.0, HDMI, Ethernet, DCIN (Power), TF card slot, AV output
I test to boot the stock images just after download them and the boot shows the HK1Series and then goes to internal android system (tvbox) so failed.
When I do the steps to put dtb file, edit extlinux.conf and rename properly u-bott to u-boot.ext (I search and test test many dtb files as like meson-sm1-hk1box-vontar-x3.dtb, meson-sm1-h96max-x3.dtb, sm1_s905x3_4g_1gbit.dtb, sm1_s905x3_4g.dtb as like others that I download on web when I search info about install armbian on s905x tv boxes).
I also try to see if I can edit a .dts file and then convert to .dtb qhen I did It doesn't work.
So none of steps above works.
But I find one image system that works called devmfc that has only a minimal image similar to a server image only with tty text.
https://github.com/devmfc/debian-on-amlogic/releases
I inspect the .image of this system, and I find that if I copy the boot.scr, boot.script and cfgload to the /boot partiton of the armbian systems and boot the Sper Console it goes to a pink screen and then after a minute just reboot or goes to hkseries system.
So I think if I can edit boot.scr, bootscript and cfgload maybe I can put the right data to force boot the real kernel of armbian. Maybe then armbian works.
I use Linux and try to open those files with text editor but doesn't work.
Anyone knows How I can edit this files ?
Any user can boot armbian on this console TvBox ?
Thanks.
Super console cube X3 seems can't boot.
in Amlogic CPU Boxes
Posted · Edited by gnutux landia
Can't figure how to copy putty terminal output messages, the terminal sent more messages but I can't find how to copy to a text file.