[Add support for BPI-r3]

Hello,

 

Are there any plans to add support for this board?

 

Thanks,

Gustavo

[Clearfog PRO change pcie to msata]

I tried both patchs since it wasn't clear which one was needed and the sata disk was not detected in either case.

 

I removed the pcie wifi card and tried moving the msata disk alone to both slots every time I compiled u-boot, no change.

 

I compiled u-boot using the armbian build tools and the 'current' or 4.4 kernel branch.

 

Seems like this is no longer working. There's another user reporting issues after upgrade, not sure if related.

 

 

[Clearfog PRO change pcie to msata]

4 minutes ago, Igor said:

You need to use u-boot.mmc

 

If you boot from SD card you only need to install this package with dpkg -i U_BOOT_PACK.DEB That's all.

 

I see, then I assume installing the package autmatically calls /usr/lib/u-boot/platform_install.sh which in turn installs u-boot.mmc by calling the function below 

 

write_uboot_platform () 
{ 
    dd if=$1/u-boot.mmc of=$2 bs=512 seek=1 status=noxfer > /dev/null 2>&1
}
 

What about my other question regarding the right patch to use? the name of the two are confusingly similar, which patch should I use slot0=mpci_1=sata.patch.disabled or slot0=sata_1=sata.patch.disabled?

 

Thanks! 

 

[Clearfog PRO change pcie to msata]

3 hours ago, Igor said:

Did you tried both slots? I forget which is 1st and which 2nd. 

This patch was working ... two years ago, but since they actually made some changes:
https://github.com/SolidRun/u-boot-armada38x/commits/u-boot-2013.01-15t1-clearfog
it is possible that it doesn't work any more.

 

Yes I did try both however, I don't think I'm updating u-boot on the SD card after applying the patch and compiling it.

 

I boot the clearfog from an SD card so, do I have to upgrade u-boot using dd? if so, which of the following files should I use? I tried u-boot.flash 'dd if=u-boot.flash of=/dev/mmcblk0 bs=512 seek=1' but that made the SD card unbootable..

 

 

/usr/lib/linux-u-boot-clearfogpro_5.74_armhf/u-boot-uart.flash
/usr/lib/linux-u-boot-clearfogpro_5.74_armhf/u-boot-uart.mmc
/usr/lib/linux-u-boot-clearfogpro_5.74_armhf/u-boot-uart.sata
/usr/lib/linux-u-boot-clearfogpro_5.74_armhf/u-boot.flash
/usr/lib/linux-u-boot-clearfogpro_5.74_armhf/u-boot.mmc
/usr/lib/linux-u-boot-clearfogpro_5.74_armhf/u-boot.sata

 

Also,  which patch should I use slot0=mpci_1=sata.patch.disabled or slot0=sata_1=sata.patch.disabled? it's not clear to me

[Clearfog PRO change pcie to msata]

Hi, I have not been able to find clear instructions explaning how to compile u-boot so it detects the installed msata disk.

What I think I have to do is rebuild u-boot using the armbian build tools and patch uboot by moving and renaming file below

~/armbian/patch/u-boot/u-boot-mvebu/slot0=sata_1=sata.patch.disabled

to the folder

~/armbian/userpatches/u-boot/u-boot-mvebu/board_clearfogpro/slot0=sata_1=sata.patch

 

After builds completes I get a linux-u-boot-clearfogpro_5.74_armhf.deb which I installed and nothing happened the msata disk still not detected.

 

Is that how am I supposted to go about to enable msata support?

 

ARMBIAN 5.60 stable Debian GNU/Linux 9 (stretch) 4.4.153-mvebu

 

root@armada:~# dpkg -L linux-u-boot-clearfogpro-default
/.
/usr
/usr/lib
/usr/lib/linux-u-boot-clearfogpro_5.74_armhf
/usr/lib/linux-u-boot-clearfogpro_5.74_armhf/u-boot-uart.flash
/usr/lib/linux-u-boot-clearfogpro_5.74_armhf/u-boot-uart.mmc
/usr/lib/linux-u-boot-clearfogpro_5.74_armhf/u-boot-uart.sata
/usr/lib/linux-u-boot-clearfogpro_5.74_armhf/u-boot.flash
/usr/lib/linux-u-boot-clearfogpro_5.74_armhf/u-boot.mmc
/usr/lib/linux-u-boot-clearfogpro_5.74_armhf/u-boot.sata
/usr/lib/u-boot
/usr/lib/u-boot/LICENSE
/usr/lib/u-boot/platform_install.sh

[Pppoe module not available]

Hi,

 

While setting up my clearfog pro with armbian I noted the pppoe module is not compiled or available to download for my kernel using apt-get. 

 

What is the recommended approach here? do I need to compile my own kernel?

 

Thanks,

Gustavo