Jump to content

renaudrenaud

Members
 View Profile  See their activity

  • Posts

    47

  • Joined

  • Last visited

 Content Type 

Posts posted by renaudrenaud

    Orange Pi Zero H5: how to log

    in Orange Pi Zero

    Posted

    Hello everybody and sorry to be sooo stupid.

    I used to play with Orange Pi Zero H2+ and there was RJ45: it allowed me to connect it via the LAN.

    Now, with the H5 version, there is no RJ45 connector. And there is no USB port. So how to gain access to this card to start configuration etc... ?

    Thanks in advance.

    0

    How do I configure Orange PI Zero to TV via AV cable?

    in Orange Pi Zero

    Posted

    Cant' exactly understand your question. Do you want to use the "TV OUT"?

     

    If yes, you have to add "tv" on the /etc/modules file and reboot.

     

    Do not forget: it is RCA or "composite" signal: usually on a TV the yellow RCA connector is for composite signal, the white for left audio channel and the red for right audio channel.

     

    Use an RCA connector and get tvout from pin 9 and GROUND from where you want.

     

    Use "tv" or "AV" or "Audio Video" on your TV. 

     

    0

    192.168.2.1 instead of 1.1

    in Beginners

    Posted

    Sorry to borrow you with I suppose a basic question...

     

    I am not at home and I have to install an opz but the router here is managing address with 192.168.2.1 instead of 1.1...

     

    Please what I have to do on the opz to connect to the router?

     

    Sorry again for my lack of knowledge.

    0

    Does VR Bluetooth gamepad-controller work in Armbian or Debian?

    in Allwinner sunxi

    Posted

    More or less the same. I have a nice little project with retrorangepie and an old monitor for a bar, but I prefer die with my ideas instead of joining Facebook. Just the fact to write the word let me the impression my fingers are dirty.

     

    I have a BT gamepad working with Retropie and I want test it with retrorangepie on OPzero and it's beautiful composite output, perfect for an RF converter perfect for the antenna plug of the old monitor.

    1

    I2S on Orange Pi H3

    in Reviews, Tutorials, Hardware hacks

    Posted

    Well I've spend few hours and now I am stuck...

     

    I've bought a 5102A card and connected with I2S on an Orange Pi One.  Everything is ok as far I can understand (sudo speaker-test -twav -c2 -Dhw:1 produces sound on the output), but I cannot use the card with squeezelite (https://github.com/ralph-irving/squeezelite).

     

    Well I use a fresh Armbian Debian Jessie: 

      ___                               ____  _    ___             
 / _ \ _ __ __ _ _ __   __ _  ___  |  _ \(_)  / _ \ _ __   ___ 
| | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | | | | | | '_ \ / _ \
| |_| | | | (_| | | | | (_| |  __/ |  __/| | | |_| | | | |  __/
 \___/|_|  \__,_|_| |_|\__, |\___| |_|   |_|  \___/|_| |_|\___|
                       |___/                                   

Welcome to ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i   
System load:   0.45             Up time:       25 sec
Memory usage:  20 % of 494Mb    IP:            192.168.1.140
CPU temp:      46°C           
Usage of /:    39% of 3.5G


    1/ I can see the card:

      

    cat /proc/asound/cards
0 [audiocodec ]: audiocodec - audiocodec
audiocodec
1 [snddaudio ]: snddaudio - snddaudio
snddaudio
2 [sndhdmi ]: sndhdmi - sndhdmi
sndhdmi



    2/ I can really see it :

      

    aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: snddaudio [snddaudio], device 0: SUNXI-TDM0 snddaudio-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0

     

    squeezelite is seeing the snddaudio card: 

    sudo /usr/bin/squeezelite-armv6hf -l
Output devices:
  null                           - Discard all samples (playback) or generate zero samples (capture)
  default:CARD=audiocodec        - audiocodec,  - Default Audio Device
  sysdefault:CARD=audiocodec     - audiocodec,  - Default Audio Device
  dmix:CARD=audiocodec,DEV=0     - audiocodec,  - Direct sample mixing device
  dsnoop:CARD=audiocodec,DEV=0   - audiocodec,  - Direct sample snooping device
  hw:CARD=audiocodec,DEV=0       - audiocodec,  - Direct hardware device without any conversions
  plughw:CARD=audiocodec,DEV=0   - audiocodec,  - Hardware device with all software conversions
  default:CARD=snddaudio         - snddaudio,  - Default Audio Device
  sysdefault:CARD=snddaudio      - snddaudio,  - Default Audio Device
  dmix:CARD=snddaudio,DEV=0      - snddaudio,  - Direct sample mixing device
  dsnoop:CARD=snddaudio,DEV=0    - snddaudio,  - Direct sample snooping device
  hw:CARD=snddaudio,DEV=0        - snddaudio,  - Direct hardware device without any conversions
  plughw:CARD=snddaudio,DEV=0    - snddaudio,  - Hardware device with all software conversions
  default:CARD=sndhdmi           - sndhdmi,  - Default Audio Device
  sysdefault:CARD=sndhdmi        - sndhdmi,  - Default Audio Device
  dmix:CARD=sndhdmi,DEV=0        - sndhdmi,  - Direct sample mixing device
  dsnoop:CARD=sndhdmi,DEV=0      - sndhdmi,  - Direct sample snooping device
  hw:CARD=sndhdmi,DEV=0          - sndhdmi,  - Direct hardware device without any conversions
  plughw:CARD=sndhdmi,DEV=0      - sndhdmi,  - Hardware device with all software conversions
  default:CARD=DAC               - USB AUDIO    DAC, USB Audio - Default Audio Device
  sysdefault:CARD=DAC            - USB AUDIO    DAC, USB Audio - Default Audio Device
  front:CARD=DAC,DEV=0           - USB AUDIO    DAC, USB Audio - Front speakers
  surround21:CARD=DAC,DEV=0      - USB AUDIO    DAC, USB Audio - 2.1 Surround output to Front and Subwoofer speakers
  surround40:CARD=DAC,DEV=0      - USB AUDIO    DAC, USB Audio - 4.0 Surround output to Front and Rear speakers
  surround41:CARD=DAC,DEV=0      - USB AUDIO    DAC, USB Audio - 4.1 Surround output to Front, Rear and Subwoofer speakers
  surround50:CARD=DAC,DEV=0      - USB AUDIO    DAC, USB Audio - 5.0 Surround output to Front, Center and Rear speakers
  surround51:CARD=DAC,DEV=0      - USB AUDIO    DAC, USB Audio - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
  surround71:CARD=DAC,DEV=0      - USB AUDIO    DAC, USB Audio - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
  iec958:CARD=DAC,DEV=0          - USB AUDIO    DAC, USB Audio - IEC958 (S/PDIF) Digital Audio Output
  dmix:CARD=DAC,DEV=0            - USB AUDIO    DAC, USB Audio - Direct sample mixing device
  dsnoop:CARD=DAC,DEV=0          - USB AUDIO    DAC, USB Audio - Direct sample snooping device
  hw:CARD=DAC,DEV=0              - USB AUDIO    DAC, USB Audio - Direct hardware device without any conversions
  plughw:CARD=DAC,DEV=0          - USB AUDIO    DAC, USB Audio - Hardware device with all software conversions

     

    note: I have connected an USB PCM 2704 seen as USB Audio



    3/ I can hear it:
      

    sudo speaker-test -twav -c2 -Dhw:1




    But I cannot understand what I have to do to be able to use it with squeezelite:

     

    When I use the USB DAC it is working with the following line:

      

    sudo /usr/bin/squeezelite-armv6hf -o front:CARD=DAC,DEV=0 -s 127.0.0.1

    Trying with the I2S card, I cannot understand why it is not working:

      

    sudo /usr/bin/squeezelite-armv6hf -o default:CARD=snddaudio,DEV=0 -s 127.0.0.1
[14:25:12.853752] test_open:277 playback open error: No such file or directory
[14:25:12.854570] output_init_common:382 unable to open output device


    Well I am stuck here, please could you help? Thanks in advance.

     

     

     

     

     

     

     

    0

    Where is Debian for OPZ?

    in Orange Pi Zero

    Posted

    Well I cannot understand the logic of this.

     

    For example, on the screen proposed by Igor here: 

     

    I can see a torrent for "Armbian_5.25_Orangepiplus2e_Debian_jessie_default_3.4.113.7z"

     

    And if I go to the page  https://www.armbian.com/orange-pi-zero-2-h3/ or the "secret" Other Download page here https://dl.armbian.com/orangepizeroplus2-h3/ I cannot  see the debian download seen on the torrent.

     

    Does it means torrent are more up to date than the website pages ?

    0

    Forum upgrade

    in Off-topic

    Posted

    Why not, but what I like on this forum, among other points, is the very clean and pure interface, without plenty of message that take 80% of the screen and let 20% for valuable information. 

    0
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines

  I accept