[ARMBIAN for Amlogic S905 and S905X (ver 5.44 =<)]

8 hours ago, balbes150 said:

This is a new SD card or you have already launched with the same version Armbian ?

It's the same one that works via USB. Attached is a screenshot with the exact message it gives me. My microSD is like the one in the picture.

[ARMBIAN for Amlogic S905 and S905X (ver 5.44 =<)]

2 hours ago, balbes150 said:

Try using a USB flash drive. Perhaps this dtb does not work correctly SD card.

Indeed, through the USB it does start. Is it possible to add the microSD unit to the dtb correctly? I have no experience with this issue. Actually, the microSD is reading it, but it can't find the second partition. Or, at least, I think so.

 

Thank you

[ARMBIAN for Amlogic S905 and S905X (ver 5.44 =<)]

Hi, there. I have a problem with the Armbian_5.44_S9xxx_Ubuntu_Ubuntu_bionic_4.16.1_server_20180523.img I get the following message the first time I start from microSD:

Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev)
The device is Mini MX s905 2GB/16GB GbE
I tried meson-gxbb-p200.dtb which is the one that starts.

Thank you

[ARMBIAN for Amlogic S905 and S905X (ver 5.44 =<)]

Hello balbes150, I found problems when activating the UFW firewall in Armbian_5.34_S9xxx_Ubuntu_xenial_3.14.29_mate_20171104. Here is a list of the problems detected in the checkup, in case it helps to compile the kernel and include the necessary modifications for UFW to work properly. Thank you so much for the effort.

 

$ sudo /usr/share/ufw/check-requirements
Has python: pass (binary: python2.7, version: 2.7.12, py2)
Has iptables: pass
Has ip6tables: pass

Has /proc/net/dev: pass
Has /proc/net/if_inet6: pass

This script will now attempt to create various rules using the iptables
and ip6tables commands. This may result in module autoloading (eg, for
IPv6).
Proceed with checks (Y/n)? y
== IPv4 ==
Creating 'ufw-check-requirements'... done
Inserting RETURN at top of 'ufw-check-requirements'... done
TCP: pass
UDP: pass
destination port: pass
source port: pass
ACCEPT: pass
DROP: pass
REJECT: pass
LOG: FAIL
error was: iptables: No chain/target/match by that name.
hashlimit: pass
limit: pass
ctstate (NEW): pass
ctstate (RELATED): pass
ctstate (ESTABLISHED): pass
ctstate (INVALID): pass
ctstate (new, recent set): FAIL (no runtime support)
error was: iptables: No chain/target/match by that name.
ctstate (new, recent update): FAIL (no runtime support)
error was: iptables: No chain/target/match by that name.
ctstate (new, limit): pass
interface (input): pass
interface (output): pass
multiport: FAIL
error was: iptables: No chain/target/match by that name.
comment: pass
addrtype (LOCAL): pass
addrtype (MULTICAST): pass
addrtype (BROADCAST): pass
icmp (destination-unreachable): pass
icmp (source-quench): pass
icmp (time-exceeded): pass
icmp (parameter-problem): pass
icmp (echo-request): pass

== IPv6 ==
Creating 'ufw-check-requirements6'... done
Inserting RETURN at top of 'ufw-check-requirements6'... done
TCP: pass
UDP: pass
destination port: pass
source port: pass
ACCEPT: pass
DROP: pass
REJECT: pass
LOG: FAIL
error was: ip6tables: No chain/target/match by that name.
hashlimit: pass
limit: pass
ctstate (NEW): pass
ctstate (RELATED): pass
ctstate (ESTABLISHED): pass
ctstate (INVALID): pass
ctstate (new, recent set): FAIL (no runtime support)
error was: ip6tables: No chain/target/match by that name.
ctstate (new, recent update): FAIL (no runtime support)
error was: ip6tables: No chain/target/match by that name.
ctstate (new, limit): pass
interface (input): pass
interface (output): pass
multiport: FAIL
error was: ip6tables: No chain/target/match by that name.
comment: pass
icmpv6 (destination-unreachable): pass
icmpv6 (packet-too-big): pass
icmpv6 (time-exceeded): pass
icmpv6 (parameter-problem): pass
icmpv6 (echo-request): pass
icmpv6 with hl (neighbor-solicitation): pass
icmpv6 with hl (neighbor-advertisement): pass
icmpv6 with hl (router-solicitation): pass
icmpv6 with hl (router-advertisement): pass
ipv6 rt: FAIL
error was: ip6tables: No chain/target/match by that name.

FAIL: check your kernel and that you have iptables >= 1.4.0
FAIL: check your kernel and iptables for additional runtime support

 

[ARMBIAN for Amlogic S905 and S905X (ver 5.44 =<)]

Hi balbes150. First of all thank you for your work.

I have two android boxes. One is an Acemax KIII 2GB / 16GB and the other a Beelink Mini MX 2GB / 16GB. The first carries a WiFi / BT chip BCM4335 and the second carries an AP6330. Can you give them Bluetooth support in your next version? I have been looking for how to do it, but it escapes my knowledge.

I leave the link that I found to a thread where they get to operate the Bluetooth of the BCM4335 chip.

Https://forum.libreelec.tv/thread-1408-post-29946.html#pid29946

If you need anything let me know.

Thank you very much.

(Google Translation)