Marcelm2000
-
Posts
3 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Marcelm2000
-
-
Hello,
thank you for your reply!
I think it is not PA17, because i'm connected physically to Pin 11 and in the Schematic
(http://forum.lemaker.org/thread-10852-1-1.html) is CON6-P11 = PI19 and that is 257, right?
I will test both afterwards!
-
Hello,
actually i have "Bananian" with the kernel "3.4.113-bananian", and I would like to switch to the Armbian mainline kernel!
My problem / question is how does it work with the GPIO in the mainline kernel?
I use these commands under the legacy kernel... (I use the modified WiringPI from LeMaker)
echo "17" > /sys/class/gpio/export echo "out" > /sys/class/gpio/gpio17/direction echo "1" > /sys/class/gpio17/value
But these unfortunately no longer work under the mainline kernel!
I don't understand how i calculate now the right GPIO Pin. (http://linux-sunxi.org/GPIO#Accessing_the_GPIO_pins_through_sysfs_with_mainline_kernel)
I look forward to your help!
Greeting,
Marcel
Need help for GPIO with BananaPro Armbian Mainline
in Allwinner sunxi
Posted
Thank you squid4t2!
It works great.
Greeting,
Marcel