brcm4330-patch and config file are installed at the right locations. I found out when booting the cubox-i via power-on then everything works fine. "hcitool scan" is executed successfully and BT devices can be paired.
However after a reboot command (without unplugging the power supply) the internal BT adapter isn't recognized anymore.
"/etc/init.d/brcm4330-patch status" reports an error message:
â— brcm4330-patch.service - LSB: Patch firmware for brcm4330 Bluetooth adapter Loaded: loaded (/etc/init.d/brcm4330-patch) Active: failed (Result: exit-code) since Do 1970-01-01 01:00:24 CET; 46 years 1 months ago Process: 569 ExecStart=/etc/init.d/brcm4330-patch start (code=exited, status=1/FAILURE)
Jan 01 01:00:19 cubox-i brcm4330-patch[569]: ok Jan 01 01:00:24 cubox-i brcm4330-patch[569]: Start pushing BRCM4330 bluetooth firmware to device and waiting 5 ...done. Jan 01 01:00:24 cubox-i brcm4330-patch[569]: Can't get device info: No such device Jan 01 01:00:24 cubox-i systemd[1]: brcm4330-patch.service: control process exited, code=exited status=1 Jan 01 01:00:24 cubox-i systemd[1]: Failed to start LSB: Patch firmware for brcm4330 Bluetooth adapter. Jan 01 01:00:24 cubox-i systemd[1]: Unit brcm4330-patch.service entered failed state. Hint: Some lines were ellipsized, use -l to show in full. root@cubox-i:~#
Bluetooth not working on cubox-i and swap partition not in use.
in Other families
Posted
Hi, I've a similar issue with BT.
brcm4330-patch and config file are installed at the right locations. I found out when booting the cubox-i via power-on then everything works fine.
"hcitool scan" is executed successfully and BT devices can be paired.
However after a reboot command (without unplugging the power supply) the internal BT adapter isn't recognized anymore.
"/etc/init.d/brcm4330-patch status" reports an error message: