Stefan Anderson
-
Posts
16 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Stefan Anderson
-
-
Ok thank you
-
https://www.armbian.com/orange-pi-zero/
For me it says Stable
-
Hello :),
I have updated my system from "Armbian_5.35_Debian_jessie_3.4.113" to latest "Armbian_5.53.180722_Orangepizero_Ubuntu_bionic_next_4.17.9".
With jessie there will only S0, S1, S2 displayed and Im Working with S1 (Uart1) and S2 (Uart2) from the 13 Pinheader.
With Bionic and also Stretch i got S0, S1, S2, S3, S4, S5, S6, S7 and none of them is working.
So how can I access the Uart1 and Uart2 with the new Bionic build?
-
Try this, its stable for me ;).
But yes they should fix this Problem in the latest Version!
-
This is because of the "bad drivers" for wifi chip.
But they dont write anywhere about problems with the Ethernet.
I switched back to the Armbian 5.35 (jessie) 3.4.113 and now I havent any problems.
-
And you are sure that's fixed now?
-
1 hour ago, tkaiser said:
No, you're using a crippled Armbian image called DietPi. Support is over there: http://dietpi.com/phpbb/index.php
How do you know this?
I cant use the latest Armbian for the Orange Pi Zero because after ~3h the eth0 is crashing.
-
-
Can you please help me to find the used Linux Version?
This is the boot output via Serial.
I need the Linux Version which is used.
U-Boot SPL 2017.05-g64c4ffa (Oct 20 2017 - 15:30:13) DRAM: 256 MiB Trying to boot from MMC1 U-Boot 2017.05-g64c4ffa (Oct 20 2017 - 15:30:13 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Zero DRAM: 256 MiB MMC: SUNXI SD/MMC: 0 In: serial Out: serial Err: serial Net: phy interface0 eth0: ethernet@1c30000 Hit any key to stop autoboot: 0 gpio: pin PA17 (gpio 17) value is 1 35424 bytes read in 128 ms (269.5 KiB/s) 4777536 bytes read in 745 ms (6.1 MiB/s) Starting kernel ... [sun8i_fixup]: From boot, get meminfo: Start: 0x40000000 Size: 256MB ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1 ion_reserve_select: ion chipid [0x2c00042! ion_reserve_common: ion reserve: [0x47e00000, 0x50000000]! [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.113-sun8i (root@jenkins) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #24 SMP PREEMPT Fri Jul 21 13:20:01 CEST 2017 [ 0.000000] cma: dma_declare_contiguous(266): ION reserve size should be 4m align! adjust size to 128MBytes [ 0.000000] cma: CMA: reserved 128 MiB at 48000000 [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0d18000 s11968 r8192 d12608 u32768 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] allocated 524288 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 256MB = 256MB total [ 0.000000] Memory: 116304k/116304k available, 145840k reserved, 0K highmem <5[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08cd2cc (8981 kB) [ 0.000000] .init : 0xc08ce000 - 0xc0920ec0 ( 332 kB) [ 0.000000] .data : 0xc0922000 - 0xc09924f0 ( 450 kB) [ 0.000000] .bss : 0xc0992ca4 - 0xc0ac62c0 (1230 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:544 [ 0.000000] Architected local timer running at 24.00MHz. [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000412] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000) [ 0.000465] pid_max: default: 32768 minimum: 301 [ 0.000789] Security Framework initialized [ 0.000835] AppArmor: AppArmor disabled by boot time parameter [ 0.001227] Mount-cache hash table entries: 512 [ 0.003257] Initializing cgroup subsys cpuacct [ 0.003292] Initializing cgroup subsys memory [ 0.003384] Initializing cgroup subsys devices [ 0.003413] Initializing cgroup subsys freezer [ 0.003441] Initializing cgroup subsys blkio [ 0.003490] Initializing cgroup subsys perf_event [ 0.003657] CPU: Testing write buffer coherency: ok [ 0.003750] ftrace: allocating 24760 entries in 73 pages [ 0.060556] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.060594] [sunxi_smp_prepare_cpus] enter <[ 0.062578] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.062741] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.070967] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.080348] Brought up 4 CPUs [ 0.080383] SMP: Total of 4 processors activated (19200.00 BogoMIPS). [ 0.081799] devtmpfs: initialized [ 0.087357] wakeup src cnt is : 2. [ 0.090043] sunxi pm init [ 0.090336] pinctrl core: initialized pinctrl subsystem [ 0.100804] NET: Registered protocol family 16 [ 0.103091] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.103230] script_sysfs_init success [ 0.105123] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl [ 0.105123] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver [ 0.105123] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.105123] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.105123] script config pll_video to 297 Mhz [ 0.105123] script config pll_de to 864 Mhz [ 0.105123] script config pll_ve to 402 Mhz <[ 0.120431] bio: create slab <bio-0> at 0 [ 0.120649] [ARISC] :sunxi-arisc driver v1.04 [ 0.142478] [ARISC] :arisc version: [v0.1.58] [ 0.251424] [ARISC] :sunxi-arisc driver v1.04 startup succeeded [ 0.254656] SCSI subsystem initialized [ 0.254656] usbcore: registered new interface driver usbfs [ 0.254656] usbcore: registered new interface driver hub [ 0.260092] usbcore: registered new device driver usb [ 0.260325] twi_chan_cfg()340 - [twi0] has no twi_regulator. [ 0.260354] twi_chan_cfg()340 - [twi1] has no twi_regulator. [ 0.260380] twi_chan_cfg()340 - [twi2] has no twi_regulator. [ 0.261883] Linux video capture interface: v2.00 [ 0.262378] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.262378] cfg80211: Calling CRDA to update world regulatory domain [ 0.262378] NetLabel: Initializing [ 0.262378] NetLabel: domain hash size = 128 [ 0.262378] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.262378] NetLabel: unlabeled traffic allowed by default [ 0.262378] Switching to clocksource arch_sys_counter [ 0.287142] FS-Cache: Loaded [ 0.287704] CacheFiles: Loaded [ 0.311424] NET: Registered protocol family 2 [ 0.334862] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.335990] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.336276] TCP bind hash table entries: 8192 (order: 4, 98304 bytes) [ 0.336561] TCP: Hash tables configured (established 8192 bind 8192) [ 0.336586] TCP: reno registered [ 0.336610] UDP hash table entries: 128 (order: 0, 4096 bytes) [ 0.336673] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) [ 0.337359] NET: Registered protocol family 1 [ 0.338192] RPC: Registered named UNIX socket transport module. [ 0.338219] RPC: Registered udp transport module. [ 0.338239] RPC: Registered tcp transport module. [ 0.338258] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.338988] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available [ 0.339203] sunxi_reg_init enter [ 0.340934] audit: initializing netlink socket (disabled) [ 0.341038] type=2000 audit(0.340:1): initialized [ 0.343714] VFS: Disk quotas dquot_6.5.2 [ 0.345225] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.346040] NFS: Registering the id_resolver key type [ 0.346831] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.346861] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.348379] NTFS driver 2.1.30 [Flags: R/W]. [ 0.349006] fuse init (API version 7.18) [ 0.349853] msgmni has been set to 483 [ 0.352821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.352860] io scheduler noop registered (default) [ 0.353689] [DISP]disp_module_init [ 0.354284] cmdline,init_disp= [ 0.354341] cmdline,disp= [ 0.362940] [DISP] Fb_map_kernel_logo,line:932:Fb_map_kernel_logo failed! [ 0.379904] Console: switching to colour frame buffer device 90x36 [ 0.399145] [DISP]disp_module_init finish [ 0.399612] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator. [ 0.399648] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator. [ 0.399680] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator. [ 0.400690] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI [ 0.400721] sw_uart_pm()890 - uart0 clk is already enable [ 0.400759] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n [ 0.513410] console [ttyS0] enabled [ 1.159701] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI [ 1.160325] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI [ 1.170216] brd: module loaded [ 1.195587] loop: module loaded [ 1.199619] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator. [ 1.206811] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator. [ 1.215269] spi spi0: master is unqueued, this is deprecated [ 1.222883] spi spi1: master is unqueued, this is deprecated [ 1.231307] PPP generic driver version 2.4.2 [ 1.236500] PPP BSD Compression module registered [ 1.241833] PPP Deflate Compression module registered [ 1.249125] PPP MPPE Compression module registered [ 1.254568] NET: Registered protocol family 24 [ 1.259674] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.287188] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.296263] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1 [ 1.305878] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000 [ 1.330072] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00 [ 1.337964] hub 1-0:1.0: USB hub found [ 1.342264] hub 1-0:1.0: 1 port detected [ 1.367457] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.376526] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2 [ 1.386045] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000 [ 1.410083] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00 [ 1.417819] hub 2-0:1.0: USB hub found [ 1.422108] hub 2-0:1.0: 1 port detected [ 1.447285] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.456361] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3 [ 1.465855] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000 [ 1.490078] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00 [ 1.497924] hub 3-0:1.0: USB hub found [ 1.502218] hub 3-0:1.0: 1 port detected [ 1.527419] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.536488] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4 [ 1.546062] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000 [ 1.570077] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00 [ 1.577833] hub 4-0:1.0: USB hub found [ 1.582114] hub 4-0:1.0: 1 port detected [ 1.587334] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.614450] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.623125] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5 [ 1.631715] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400 [ 1.695202] hub 5-0:1.0: USB hub found [ 1.699445] hub 5-0:1.0: 1 port detected [ 1.724789] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.733475] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6 [ 1.742058] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400 [ 1.805207] hub 6-0:1.0: USB hub found [ 1.809448] hub 6-0:1.0: 1 port detected [ 1.834711] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.843381] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7 [ 1.851964] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400 [ 1.915154] hub 7-0:1.0: USB hub found [ 1.919397] hub 7-0:1.0: 1 port detected [ 1.944564] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.953296] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8 [ 1.961899] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400 [ 2.025106] hub 8-0:1.0: USB hub found [ 2.029344] hub 8-0:1.0: 1 port detected [ 2.034532] Initializing USB Mass Storage driver... [ 2.040702] usbcore: registered new interface driver usb-storage [ 2.047461] USB Mass Storage support registered. [ 2.052799] usbcore: registered new interface driver ums-alauda [ 2.059539] usbcore: registered new interface driver ums-cypress [ 2.066414] usbcore: registered new interface driver ums-datafab [ 2.073286] usbcore: registered new interface driver ums_eneub6250 [ 2.080370] usbcore: registered new interface driver ums-freecom [ 2.087208] usbcore: registered new interface driver ums-isd200 [ 2.093998] usbcore: registered new interface driver ums-jumpshot [ 2.100981] usbcore: registered new interface driver ums-karma [ 2.107635] usbcore: registered new interface driver ums-onetouch [ 2.114633] usbcore: registered new interface driver ums-realtek [ 2.121524] usbcore: registered new interface driver ums-sddr09 [ 2.128269] usbcore: registered new interface driver ums-sddr55 [ 2.135121] usbcore: registered new interface driver ums-usbat [ 2.143503] mousedev: PS/2 mouse device common for all mice [ 2.150276] sunxikbd_init failed. [ 2.154133] ls_fetch_sysconfig_para: ls_unused. [ 2.159953] [RTC] WARNING: Rtc time will be wrong!! [ 2.165476] [RTC] WARNING: use *internal OSC* as clock source [ 2.172489] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0 [ 2.180052] i2c /dev entries driver [ 2.185658] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18) [ 2.195195] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19) [ 2.204720] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x1a) [ 2.214246] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29) [ 2.223786] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a) [ 2.233311] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b) [ 2.242829] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c) [ 2.252353] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d) [ 2.261871] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e) [ 2.271422] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18) [ 2.280958] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19) [ 2.290506] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a) [ 2.300037] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29) [ 2.300119] usb 7-1: new full-speed USB device number 2 using sunxi-ohci [ 2.317166] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a) [ 2.326709] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b) [ 2.336256] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c) [ 2.345820] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d) [ 2.355356] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e) [ 2.364691] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0 [ 2.372098] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf [ 2.383590] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0) [ 2.391175] wdt_enable, write reg 0xf1c20cb8 val 0x00000000 [ 2.397447] timeout_to_interv, line 167 [ 2.401790] interv_to_timeout, line 189 [ 2.406108] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec [ 2.416148] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.426113] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq [ 2.447262] no blue_led, ignore it! [ 2.451866] no led_0, ignore it! [ 2.455466] no led_1, ignore it! [ 2.459063] no led_2, ignore it! [ 2.462697] no led_3, ignore it! [ 2.466296] no led_4, ignore it! [ 2.469892] no led_5, ignore it! [ 2.473510] no led_6, ignore it! [ 2.477109] no led_7, ignore it! [ 2.482350] usbcore: registered new interface driver usbhid [ 2.488595] usbhid: USB HID core driver [ 2.500924] asoc: sndcodec <-> sunxi-codec mapping ok [ 2.508685] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly! [ 2.519441] [I2S]snddaudio cannot find any using configuration for controllers, return directly! [ 2.523738] mmc0: new SD card at address 0001 [ 2.524584] mmcblk0: mmc0:0001 SD 1.86 GiB [ 2.526634] mmcblk0: p1 p2 p3 [ 2.528306] mmcblk mmc0:0001: Card claimed for testing. [ 2.528330] mmc0:0001: SD 1.86 GiB [ 2.551863] [DAUDIO0] driver not init,just return. [ 2.563962] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok [ 2.572698] oprofile: using arm/armv7-ca7 [ 2.577515] u32 classifier [ 2.580576] Performance counters on [ 2.584850] input device check on [ 2.588929] Actions configured [ 2.593313] TCP: bic registered [ 2.596820] TCP: cubic registered [ 2.600544] TCP: westwood registered [ 2.604530] TCP: highspeed registered [ 2.608611] TCP: hybla registered [ 2.612334] TCP: htcp registered [ 2.615932] TCP: vegas registered [ 2.619626] TCP: veno registered [ 2.623248] TCP: scalable registered [ 2.627234] TCP: lp registered [ 2.630662] TCP: yeah registered [ 2.634261] TCP: illinois registered [ 2.638244] Initializing XFRM netlink socket [ 2.643437] NET: Registered protocol family 10 [ 2.650401] NET: Registered protocol family 17 [ 2.655398] NET: Registered protocol family 15 [ 2.660450] Registering the dns_resolver key type [ 2.665977] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 2.674578] ThumbEE CPU extension supported. [ 2.679364] Registering SWP/SWPB emulation handler [ 2.685826] registered taskstats version 1 [ 2.691889] cmdline,disp= [ 2.695161] [DISP] disp_init_tv,line:539:screen 0 do not support TV TYPE! [ 2.702795] [DISP] bsp_disp_tv_register,line:998:'ptv is null [ 2.709279] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr1<-->device1, type=2, mode=11 [ 2.715920] ths_fetch_sysconfig_para: type err device_used = 1. [ 2.718143] CPU Budget:corekeeper enabled [ 2.718544] CPU Budget:Register notifier [ 2.718563] CPU Budget:register Success [ 2.718586] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0 [ 2.878854] mmc1: new high speed SDIO card at address 0001 [ 2.925627] ALSA device list: [ 2.928937] #0: audiocodec [ 2.932184] #1: sndhdmi [ 2.937915] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 2.969437] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 2.978595] VFS: Mounted root (ext3 filesystem) on device 179:1. [ 2.991927] devtmpfs: mounted [ 2.995883] Freeing init memory: 328K INIT: version 2.88 booting [ 3.717246] EXT4-fs (mmcblk0p3): warning: mounting unchecked fs, running e2fsck is recommended [ 3.732946] EXT4-fs (mmcblk0p3): mounted filesystem without journal. Opts: data=ordered Starting udev [ 3.953086] udevd[107]: starting version 3.2.1 [ 4.059850] udevd[111]: starting eudev-3.2.1 [ 4.281029] vmouse_input_dev_open [ 4.330277] vmouse_input_dev_close [ 5.034467] [XRADIO] Driver Label:L34M.01.08.0002 Aug 23 2017 12:45:26 [ 5.042137] [XRADIO] Allocated hw_priv @ c6e23240 [ 5.047612] [XRADIO_ERR] Access_file failed, path:/data/xr_wifi.conf! [ 5.055485] [SBUS] XRadio Device:sdio clk=50000000 [ 5.061191] xradio wlan power on [ 5.216927] [XRADIO] Detect SDIO card 1 [ 5.567651] [XRADIO_ERR] xradio_load_firmware: can't read config register, err=-110. [ 5.576358] [XRADIO_ERR] xradio_load_firmware failed(-110). [ 5.903842] xradio wlan power off [ 5.957614] [XRADIO] Remove SDIO card 1 [ 5.957881] mmc1: card 0001 removed [ 6.064081] [XRADIO_ERR] xradio_host_dbg_init failed=2599 [ 6.070179] [XRADIO] Driver Label:L34M.01.08.0002 Aug 23 2017 12:45:26 [ 6.077654] [XRADIO] Allocated hw_priv @ c7189240 [ 6.083122] [XRADIO_ERR] Access_file failed, path:/data/xr_wifi.conf! [ 6.090914] xradio wlan power on [ 6.246659] [XRADIO] Detect SDIO card 1 [ 6.298829] mmc1: new high speed SDIO card at address 0001 [ 6.305674] [SBUS] XRadio Device:sdio clk=50000000 [ 6.312054] [XRADIO] XRADIO_HW_REV 1.0 detected. [ 6.449236] [XRADIO] Bootloader complete [ 6.564680] [XRADIO] Firmware completed. [ 6.571313] [WSM] Firmware Label:XR_C01.08.0043 Jun 6 2016 20:41:04 [ 6.579913] [XRADIO] Firmware Startup Done. [ 6.717410] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=ordered [ 6.883172] usb 7-1: USB disconnect, device number 2 [ 7.900869] i2c i2c-0: new_device: Instantiated device pcf8523 at 0x68 [ 7.917756] rtc-pcf8523 0-0068: rtc core: registered rtc-pcf8523 as rtc1 rm: can't remove '/tmp': Read-only file system [ 8.380205] usb 7-1: new full-speed USB device number 3 using sunxi-ohci rm: can't remove '/etc/resolv.conf': Read-only file system ln: /etc/resolv.conf: File exists INIT: Entering runlevel: 5 Starting system message bus: dbus. Starting Connection Manager Starting Dropbear SSH server: Starting watchdog: dropbear. [ OK ] Starting bluetooth bluetoothd [ 10.466257] gmac0: probed [ 10.469677] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00) Starting ntpd: done Starting radvd: * /etc/radvd.conf does not exist or is empty. * See /usr/share/doc/radvd/radvd.conf.example for a simple * configuration suitable for most systems, and radvd.conf(5) * for configuration file syntax. radvd will *not* be started. Starting syslogd/klogd: done Starting Telephony daemon Starting crond: OK vm.panic_on_oom = 1 kernel.panic = 5
-
-
After ~3h I cant connect to any Port (80,22 8888, 8083 ...)
When I restart the eth0 its back again for ~3h.
-
pi@orangepizero:~$ sudo armbianmonitor -u
System diagnosis information will now be uploaded to Please post the URL in the forum where you've been asked for.I attached the output for sudo armbianmonitor -U
-
"ARMBIAN 5.37 user-built Ubuntu 16.04.3 LTS 3.4.113-sun8i"
OrangePi Zero H2+ Version 1.4
When I run armbianmonitor -u it wont give me any URL.
-
I have the same issue here.
After some hours I can't access the OPi Zero via any connection (eth / wifi).
I tried via Serial and I can ping google.com without problems.
When i restart my network "sudo ip link set eth0 down && sudo ip link set eth0 up" all is running fine again.
OrangePI Zero+ H5 WiringPi
in Allwinner sunxi
Posted
Hello,
does anybody found a working WiringPi version for the Orange PI Zero+ H5?