Jump to content

Fazik83

Members
 View Profile  See their activity

  • Posts

    14

  • Joined

  • Last visited

 Content Type 

Posts posted by Fazik83

    Armbian 23.8 Bookworm eth0 missing

    in Allwinner sunxi

    Posted

    But I have not internet access via eth (end0)

    Ifconfig

    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 127.0.0.1  netmask 255.0.0.0
            inet6 ::1  prefixlen 128  scopeid 0x10<host>
            loop  txqueuelen 1000  (Local Loopback)
            RX packets 32  bytes 2592 (2.5 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 32  bytes 2592 (2.5 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

    wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.2.102  netmask 255.255.255.0  broadcast 192.168.2.255
            inet6 fe80::3ad5:4df8:1ff:4c0e  prefixlen 64  scopeid 0x20<link>
            ether b0:02:47:b9:f0:e9  txqueuelen 1000  (Ethernet)
            RX packets 1422  bytes 166846 (162.9 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 1216  bytes 525875 (513.5 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

    0

    Orange Pi Plus 2E - time problem

    in Allwinner sunxi

    Posted

    Hello Guys,

    I have a problem with time in my Orange Pi Plus 2E.

    I have installed yesterday Linux orangepiplus2e 4.19.62-sunxi #5.92 SMP Wed Jul 31 22:07:23 CEST 2019 armv7l GNU/Linux and and I can't set right time.

      

    root@orangepiplus2e:~# hwclock
2019-10-07 16:52:25.994362+02:00
root@orangepiplus2e:~# date
Mon Oct  7 16:56:46 CEST 2019

    Now is 16:40 hour.  Yesterday different was about 20 minutes, today is about 4 minutes. How to align the time? 

    root@orangepiplus2e:~# hwclock --test -D
hwclock: use --verbose, --debug has been deprecated.
hwclock from util-linux 2.33.1
System Time: 1570460247.618048
Trying to open: /dev/rtc0
Using the rtc interface to the clock.
Last drift adjustment done at 1570392310 seconds after 1969
Last calibration done at 1570392310 seconds after 1969
Hardware clock is on local time
Assuming hardware clock is kept in local time.
Waiting for clock tick...
...got clock tick
Time read from Hardware Clock: 2019/10/07 16:53:13
Hw clock time : 2019/10/07 16:53:13 = 1570459993 seconds since 1969
Time since last adjustment is 67683 seconds
Calculated Hardware Clock drift is 0.000000 seconds
2019-10-07 16:53:11.370984+02:00
Test mode: nothing was changed.
    root@orangepiplus2e:~# timedatectl status
               Local time: Mon 2019-10-07 16:59:06 CEST
           Universal time: Mon 2019-10-07 14:59:06 UTC
                 RTC time: Mon 2019-10-07 16:54:51
                Time zone: Europe/Warsaw (CEST, +0200)
System clock synchronized: no
              NTP service: inactive
          RTC in local TZ: yes

Warning: The system is configured to read the RTC time in the local time zone.
         This mode cannot be fully supported. It will create various problems
         with time zone changes and daylight saving time adjustments. The RTC
         time is never updated, it relies on external facilities to maintain it.
         If at all possible, use RTC in UTC by calling
         'timedatectl set-local-rtc 0'.

     

    0

    Debian Stretch Next freeze

    in Allwinner sunxi

    Posted

    I didn't know.

    I spend a lot of time to configure my Armbian and I know google and You didn't have to teach me in this topic.

    And I fresh Armbian freeze after 1-2 hours, then... something wrong in image. Why image is still on upload? If is fix, why fix is not pinned? Att Debian_stretch_next.7z dated 27.01.2018.

     

    0

    Debian Stretch Next freeze

    in Allwinner sunxi

    Posted

    Orange Pi Plus 2E

    Linux orangepiplus2e 4.14.18-sunxi #24 SMP Fri Feb 9 16:24:32 CET 2018 armv7l GNU/Linux

    I didn't try any recommendation. Could you send me link?

    EDIT.

    Today morning I try to log in Armbian via Putty and I can't. When I insert password, terminal do nothing. I can't log in via SSH and probably here is fault. Could someone help me?

    0

    Debian Stretch Next freeze

    in Allwinner sunxi

    Posted

    Hi all,

    My Armbian hangs (freeze) after 1-2 hours. Below dmesg 

    Aug 17 19:10:39 localhost kernel: [ 1666.194984] WARNING: CPU: 0 PID: 693 at lib/iov_iter.c:695 copy_page_to_iter+0x21d/0x35c
Aug 17 19:10:39 localhost kernel: [ 1666.194987] Modules linked in: tun xt_nat xt_tcpudp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter snd_soc_hdmi_codec rc_cec dw_hdmi_i2s_audio dw_hdmi_cec evdev sun8i_dw_hdmi dw_hdmi cec ir_lirc_codec lirc_dev pl2303 usbserial sun4i_i2s sunxi_cir sun8i_codec_analog sun4i_gpadc_iio sun4i_codec sun4i_tcon sun8i_mixer snd_soc_simple_card snd_soc_simple_card_utils snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore sun4i_drm uio_pdrv_genirq uio 8189fs cfg80211 rfkill ip_tables x_tables pwrseq_simple sy8106a_regulator uas realtek
Aug 17 19:10:39 localhost kernel: [ 1666.195093] CPU: 0 PID: 693 Comm: nfsd Not tainted 4.14.18-sunxi #24
Aug 17 19:10:39 localhost kernel: [ 1666.195095] Hardware name: Allwinner sun8i Family
Aug 17 19:10:39 localhost kernel: [ 1666.195117] [<c010db15>] (unwind_backtrace) from [<c010a0d9>] (show_stack+0x11/0x14)
Aug 17 19:10:39 localhost kernel: [ 1666.195128] [<c010a0d9>] (show_stack) from [<c0868f69>] (dump_stack+0x69/0x78)
Aug 17 19:10:39 localhost kernel: [ 1666.195139] [<c0868f69>] (dump_stack) from [<c011a233>] (__warn+0xaf/0xc0)
Aug 17 19:10:39 localhost kernel: [ 1666.195148] [<c011a233>] (__warn) from [<c011a2f5>] (warn_slowpath_null+0x19/0x1c)
Aug 17 19:10:39 localhost kernel: [ 1666.195156] [<c011a2f5>] (warn_slowpath_null) from [<c0565759>] (copy_page_to_iter+0x21d/0x35c)
Aug 17 19:10:39 localhost kernel: [ 1666.195170] [<c0565759>] (copy_page_to_iter) from [<c01d8543>] (generic_file_read_iter+0x303/0x740)
Aug 17 19:10:39 localhost kernel: [ 1666.195183] [<c01d8543>] (generic_file_read_iter) from [<c024e2ab>] (generic_file_splice_read+0x83/0xd8)
Aug 17 19:10:39 localhost kernel: [ 1666.195193] [<c024e2ab>] (generic_file_splice_read) from [<c024e68d>] (splice_direct_to_actor+0x89/0x17c)
Aug 17 19:10:39 localhost kernel: [ 1666.195203] [<c024e68d>] (splice_direct_to_actor) from [<c03271e9>] (nfsd_splice_read+0x59/0x74)
Aug 17 19:10:39 localhost kernel: [ 1666.195212] [<c03271e9>] (nfsd_splice_read) from [<c0327671>] (nfsd_read+0x22d/0x234)
Aug 17 19:10:39 localhost kernel: [ 1666.195222] [<c0327671>] (nfsd_read) from [<c0325825>] (nfsd_proc_read+0x81/0xe8)
Aug 17 19:10:39 localhost kernel: [ 1666.195231] [<c0325825>] (nfsd_proc_read) from [<c032424b>] (nfsd_dispatch+0x83/0x114)
Aug 17 19:10:39 localhost kernel: [ 1666.195243] [<c032424b>] (nfsd_dispatch) from [<c084f66b>] (svc_process_common+0x29f/0x440)
Aug 17 19:10:39 localhost kernel: [ 1666.195252] [<c084f66b>] (svc_process_common) from [<c084f8df>] (svc_process+0xd3/0x138)
Aug 17 19:10:39 localhost kernel: [ 1666.195259] [<c084f8df>] (svc_process) from [<c0323e55>] (nfsd+0xad/0xfc)
Aug 17 19:10:39 localhost kernel: [ 1666.195271] [<c0323e55>] (nfsd) from [<c0131a91>] (kthread+0xfd/0x104)
Aug 17 19:10:39 localhost kernel: [ 1666.195282] [<c0131a91>] (kthread) from [<c0106719>] (ret_from_fork+0x11/0x38)
Aug 17 19:10:39 localhost kernel: [ 1666.195286] ---[ end trace 8b890c497145bf7b ]---

     

    0

    NFS doesn't work - solved

    in Allwinner sunxi

    Posted

    Hello everyone,

    I have OrangePiPlus2E and I use Debian Jessie default 3.4.113-sun8i

    I was download and install Debian Stretch Next on second card and NFS don't work.

    I installed nfs-kernel-server and nfs-common. Next I copy exports file from older Debian and I can't connect to my Armbian via NFS protocol.

    Log file tell mi device trying connect, but I get answer from Armbian: can't get hostname.

    I don't know whad I did wrong. If I change CF card, NFS works fine on Debian Jessie.

    Could you help me?

    Regards

    0
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines

  I accept